Danfoss Vloerverwarming - pagina 3

Danfoss TWA-K thermische aandrijving 24V NC. De thermische aandrijving TWA-K serie wordt gebruikt met elektrische aan/uit-regelingen om Heimeier, MNG en Oventrop kleppen met M30×1.5 verbindingen te activeren. Andere kleppen en vloerverwarmingsverdelers met M30×1.5 verbindingen kunnen ook worden geactiveerd

Danfoss Link HC masterregelaar 10. Draadloze temperatuurregeling - door het hele huis. Danfoss Link is intelligente en draadloze communicatietechnologie aan de binnenkant en stijlvol aan de buitenkant met zijn tijdloze ontwerp. Voor totale controle over uw indeling

Danfoss FHM-C2 voorgefabriceerde vloerverwarmingsverdeler voor het regelen van de stromingstemperatuur in watergedragen vloerverwarmingssystemen. Met Danfoss Icon-vloerverwarmingsregeling en uitbreidingsmodule kan de stromingstemperatuur elektronisch worden geregeld volgens de verwarmingsbehoefte in huis.

Voor degenen die de gewenste temperatuur willen instellen, de huidige temperatuur willen zien en de vloeroppervlaktetemperatuur willen regelen. Kenmerken draadloze display thermostaten• Infrarood vloertemperatuursensor• Temperatuurbereikbeperking• Draadloze tweewegcommunicatie• Touchscreen bediening• Pictogramgebaseerde navigatie• Geruisloos schakelen• Batterij (2 x 1,5V) gevoed

Danfoss TWA-A thermal actuator 24V NO. The thermal actuator TWA-A range is used with electrical on/off-controls to activate several types of Danfoss valves and floor heating manifolds. The actuator is equipped with a visual position indicator to show the

Danfoss SSM underfloor heating manifold in stainless steel with output for 10 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Danfoss doorstroomthermostaat type FH-TC voor compacte vloerverwarmingsverdeler met zelfactiverende thermostatische regeling.

DEVIpipeheat 10 V3, 12m Self limiting with Danish plug

DEVIpipeheat 10 V3, 8m Self limiting with Danish plug

Danfoss SSM underfloor heating manifold in stainless steel with output for 4 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Kabel voor ABNM A5 1 meter, halogeenvrij (0-10V). ONTHOUD 406848800 EN 460947976

Temperature - floor [°C]: 4 - 45, Temperature - room [°C]: 4 - 35, Display type: LED, Application: Floor heating

DEVIpipeheat 10 V3, 4m Self limiting with Danish plug

Danfoss ABNM A5 thermische aandrijving. Danfoss ABN A5 (Aan/Uit, 24/120/230V) en ABNM A5 LIN/LOG (0-10V, 24V AC en DC) zijn thermische aandrijvingen voor AB-QM DN10-32 met een slag van 5 mm/6,5 mm, plug-in kabel en IP54 beschikbaar als NC en NO.

De Danfoss FHM-C1 shunt wordt gebruikt voor het regelen van de vloerverwarming.

Danfoss 088H3120 sanitaire fitting

DEVIpipeheat 10 V3, 14m Self limiting with Danish plug

DEVIpipeheat 10 V3, 22m Self limiting with Danish plug

DEVIpipeheat 10 V3, 19m Self limiting with Danish plug

For those who want to use cooling and prevent condensation.

Danfoss SSM underfloor heating manifold in stainless steel with output for 11 heating circuits and flow meters. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is with a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

De draaiknop thermostaat is een kosteneffectieve kamerthermostaat met eenvoudige bediening en alle geavanceerde functies van het Danfoss Icon vloerverwarmingssysteem. Draadloos, 3 jaar batterijduur, optie voor het beperken van de temperatuurinstelling, 2 stuks AA-batterijen.

Danfoss SSM underfloor heating manifold in stainless steel with output for 8 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.