Danfoss Vloerverwarming - pagina 2

24V room thermostat for installation 80x80 with replaceable frames and touch display. Can be used with a floor sensor.

Danfoss IconTM Zigbee Module, 24V/wireless. Used to connect the Danfoss Icon master controller (088U1141 or 088U1142) to the Zigbee 3.0 network and can thereby be controlled via the Danfoss Ally gateway or a 3rd party Zigbee 3.0 compatible gateway.

24V room thermostat for wall mounting with touch display. Can be used with a floor sensor.

De Danfoss BasicPlus en BasicPlus2 kamerthermostaten zijn ontworpen als stand-alone thermostaten die rechtstreeks verbonden worden met een 230V actuator. De thermostaten zijn verkrijgbaar in versies met draaiknop, display en programmeerbaar display.

Voor degenen die vraaggestuurde toevoertemperatuur willen gebruiken. Kenmerken thermische actuator • Speciale actuator voor functionaliteit van vraaggestuurde toevoertemperatuur • IP54, beschermd tegen stof en spatwater

Voor degenen die zeer geavanceerde controle-opties willen, inclusief koelbedrijf en regeling van de toevoertemperatuur. Kenmerken uitbreidingsmodule • Vereiste module • Verzendt en ontvangt draadloze signalen tussen kamerthermostaten en Master Controller

For those who want to extend the wireless signal range.

Danfoss SSM underfloor heating manifold in stainless steel with output for 5 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

DEVIpipeheat 10 V3, 6m Self limiting with Danish plug

DEVIpipeheat 10 V3, 10m Self limiting with Danish plug

Danfoss SSM underfloor heating manifold in stainless steel with output for 6 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Danfoss floorheating FHF-BV. End-pieces, brackets and other accessories for the FHF manifold series. Ball valve prepared Danfoss thermometer.

Danfoss Eindstuk - Eindstukken, beugels en andere accessoires voor de FHF-verzamelleidingserie. Eindstuk met handmatige ontluchting

Danfoss compressiefittingen. Koppelingen, RA 15/6T, RA 15/6TB, RLV-K, RLV-KD, RLV-KS, RA-C 15, Manifold CFD.

Danfoss compressiefittingen. Koppelingen, RA 15/6T, RA 15/6TB, RLV-K, RLV-KD, RLV-KS, RA-C 15, Manifold CFD.

Danfoss compressiefittingen. Koppelingen, RA 15/6T, RA 15/6TB, RLV-K, RLV-KD, RLV-KS, RA-C 15, Manifold CFD.

Isolatie voor Danfoss verdeelstuk FHF en FH-ME

Danfoss compressiefittingen. Koppelingen, RA 15/6T, RA 15/6TB, RLV-K, RLV-KD, RLV-KS, RA-C 15, Manifold CFD.

Danfoss compressiefittingen voor RA-N 15, RA-FN 15, RA-U/UN 15, RA 15/6T, RA 15/6TB, RTD 15 en RLV 15

Danfoss vloerverwarming FHF-E. Eindstukken, beugels en andere accessoires voor de FHF-verzamelleidingserie. Eindkap.

Danfoss SSM underfloor heating manifold in stainless steel with output for 2 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

DEVIpipeheat 10 V3, 16m Self limiting with Danish plug

Devi fitting

DEVIpipeheat 10 V3, 25m Self limiting with Danish plug

Danfoss SSM underfloor heating manifold in stainless steel with output for 12 heating circuits and flow meters. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is with a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.