Bosch - pagina 68

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, and extends the life of the bit. The drill head provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling, and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.

The sanding frame allows for a controlled and uniform speed for material removal during surface sanding of large wooden surfaces. It includes a brush and a plastic insert. It is ideal for stable plane sanding with surface protection. Easy assembly without the use of tools. The frame is designed for Bosch belt sanders.Sanding frame with brush and plastic insertIdeal for stable plane sanding with surface protectionEasy assembly without the use of tools

Grove vuilmondstuk, voor stofzuiger

The fleece filter bag is a spare bag for dry vacuuming. It is made of fleece and easily collects and removes dust. If you use a fleece filter bag, make sure that the automatic filter cleaning (AFC) is turned off to avoid damaging the fleece filter bag. Designed for Bosch vacuum cleaners.
Fiber filter bag

Boor, spiraalboor, 10 stuks, 4.5 mm, cilindrisch, lengte: 80 mm

Boor, spiraalboor, 10 stuks, 4 mm, cilindrisch, lengte: 75 mm

Nieten type 53 bieden type 53 bevestiging met 11.4 mm breedte, 0.74 mm dikte en 12.0 mm lengte.

Nieten type 53 zijn geschikt voor werk met natuurlijke materialen en textiel/weefsel, tapijt, houten akoestische panelen, kunststof en kunstgrastapijt.

Houtboorset, 3-delig, met cilindrische schachten en drie diameters voor werken in een breed scala aan houtachtige materialen.

Houtschachtset, 3-delig bevat boren met diameters 15.0–6.0 mm, 15.0 mm en 15.0 mm, elk met 6 mm schachtdiameter en totale lengtes van 65 mm, 60 mm en 48 mm, geschikt voor materialen zoals massief hardhout, zachthout, multiplex, spaanplaat, MDF, HDF, multiplexplaat en gelamineerd hout.

Boor, voor plastic, non-ferrometaal, gietijzer, gegoten staal, gelegeerd staal, ongelegeerd staal, spiraalboor van 14 mm diameter en cilindrische vorm met een lengte van 160 mm

Expert for Metal cutting disc provides efficient cutting in metal with maximum safety. The disc is made of first-class aluminum oxide with advanced phenolic resin for demanding work and delivers good results. In addition, the disc's precision-produced fiberglass mesh ensures high stability, durability, and safety during cutting. Use this disc for cutting in metal. Bosch cutting discs comply with the maximum safety requirements according to EN 12413, FEPA, and oSa. The disc is compatible with angle grinders.
Straight

Boor, voor beton, metselwerk, kalksteen, steen, kunststeen, 8 mm diameter en 120 mm lengte

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the borehead has a 135-degree point and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers.
Package with one piece.

Routerbit, voor hout, Kerngatfrees, 12 mm, lengte: 40 mm

To Black & Decker

Voor Black & Decker, Bosch, Makita, Metabo, Skil...

Schuurpad, 125 mm, rond

The adapter is intended for Bosch hammer drills. The self-tightening drill chuck with adapter is a Bosch system drill chuck and is easy to mount and dismount without the use of tools. Designed to easily clamp drills with a diameter of 1.5 to 13 mm and does not require a key. Self-tightening drill chuck with adapter

Sole plate

Routerbit, Recht, 11 mm, lengte: 51 mm

Hamerboor SDS plus met 12 mm diameter, 400 mm werklengte en 460 mm totale lengte voor boren in steen, metselwerk, graniet, beton en gewapend beton.

Hamerboor SDS plus is gespecificeerd voor SDS plus-hamerboren en vermeld voor gebruik in gangbare harde bouwmaterialen, met duidelijke maatvoering voor nauwkeurige boorkeuze.

It is suitable for use with handheld, table-mounted portable milling machines and CNC. The Wood Straight-bore head standard ensures optimal cutting for common milling tasks. Durability and reliable cutting results are achieved thanks to high-quality tungsten carbide cutters. In addition, the bore head prevents kickback by limiting the thickness of the generated chips. It is intended for milling grooves, joints, notches and feather joints in soft and hard solid wood as well as composite wood

Verstelbare platte boor biedt een boorbereik van 15.0–45.0 mm, 8 mm schacht, en is ontworpen voor gebruik met een boormachine.

Bosch Verstelbare platte boor wordt geleverd als 1 stuk en is geschikt voor middelhard hout en zachthout, met een werklengte van 9 cm voor gecontroleerd boren.

Diameter mm: 10.0Shaft diameter mm: 8Total length mm: 90
Wood|SoftwoodWood|Acoustic panels

Metaalborenset bevat 5 HSS high-speed steel-boren met een 6.35 mm zeskantschacht voor gebruik met een boormachine, geleverd in een draagkoffer.

Bosch Metaalborenset, 5-delig, HSS-G met zeskantschacht omvat boormaten 2, 3, 4, 5 en 6 mm en is geschikt voor ijzer en metaal, plaatmetaal en hard kunststof.

Jigzaagblad, voor tegels, keramiek, gietijzer, 3 stuks, korrel: 30