Bosch - pagina 66

Hamerborenset met SDS plus bevat vijf boormaten en is geschikt voor het boren in steen, metselwerk, graniet, beton en gewapend beton.

Bosch 5-piece Hammer Drill Bit Set SDS plus wordt geleverd met de volgende diameter x lengte-combinaties: 5.0x110, 5.5x110, 6.0x160, 7.0x160 en 8.0x160, zodat je een praktisch bereik hebt voor verschillende boorklussen in harde bouwmaterialen.

• SDS plus-hamerboren in 5 maten
• Voor steen, metselwerk, graniet, beton en gewapend beton
• Maten: 5.0x110; 5.5x110; 6.0x160; 7.0x160; 8.0x160

Hamerboor met SDS plus-schacht, 16 mm diameter en 550 mm werklengte voor het boren in steen, metselwerk, graniet, beton en gewapend beton.

Bosch Hammerbor SDS plus heeft een gespecificeerde totale lengte van 610 mm en is ontworpen voor SDS plus-compatibele hamerboortoepassingen in gangbare minerale bouwmaterialen.

Verzinkset met één snijkant in een 3-delige kit met diameters 8.0, 10.0 en 12.0 mm, 50 mm totale lengte en een cilindrische schacht.

Bosch C countersink set, 1-flute, 3 pieces is ontworpen voor gebruik op non-ferrometalen, onedele metalen, kunststof en piepschuim, zachthout en hardhout/massief hout, en ferrometalen inclusief plaatmetaal.

Boor levert een 3.2 mm HSS-Co metaalbooroplossing voor gebruik in een boormachine, met 65 mm totale lengte en 3.6 cm werklengte.

Bosch Metaalboor HSS-Co, DIN 338 is ontworpen voor boren in gelegeerd staal, gietijzer, ongelegeerd staal en roestvrij staal en wordt geleverd als 1 boor in de verpakking.

They are for both DIY tasks and professional purposes with staple guns from the following brands: Bostitch, Esco, kwb, Lux, Novus, Rocafix, Rocagraf and Swingline. Fine wire staples of type 58 are ideal for a multitude of general stapling tasks in a wide range of thin materials such as fabrics, paper, flat wooden strips and wire fences. They are particularly suitable for stapling thin materials where the staple back must not be pressed into the material. The staples also have a narrow back that allows them to penetrate deeply into the material and provide good grip with a very discreet staple back

They are for both DIY tasks and professional purposes with staple guns from the following brands: Bostitch, Esco, kwb, Lux, Novus, Rocafix, Rocagraf and Swingline. Fine wire staples of type 58 are ideal for a multitude of general stapling tasks in a wide range of thin materials such as fabrics, paper, flat wooden strips and wire fences. They are particularly suitable for stapling thin materials where the staple back must not be pressed into the material. The staples also have a narrow back that allows them to penetrate deeply into the material and provide a good grip with a very discreet staple back

The fine wire staples fit staple guns from the following brands: AEG, Arrow, Black+Decker, Bosch, Esco, kwb, Maestri, Mekano, Metabo, Neckermann/Bullcraft Novus Outifrance Piranha Rocagraf Stanley Skil and Wolfcraft. The fine wire staples type 53 are ideal for a multitude of general DIY tasks and professional stapling jobs. They are suitable for a wide range of thin materials such as fabrics paper flat wooden mouldings and wire mesh fencing. In addition the staples are particularly suitable for applications where the staple back should not be pressed into the material. The staples have a narrow back which allows them to penetrate deeply into the material providing good grip with a very discreet staple back.
Weather-resistant stainless steel staples

They are particularly suitable for fastening thin materials where the staple back must not be pressed into the material. Flat wire staples, type 52, fit Black+Decker staplers. They are ideal for both DIY tasks and professional stapling tasks in a wide range of materials such as thin paper and cardboard, foils, labels and paper. The staples have a narrow back that allows them to penetrate deeply into the material while providing a good grip with a very discreet staple back

System accessories PRR 250 ES; Handle and grinding sleeve (conical) SET

It is intended for use with planers or for hand grinding. The hole punch punches holes in grinding discs that lack holes. It is made of plastic.
Punching tool in plastic

The conical grinding cups provide a long lifespan when grinding stone and concrete. Its high-quality silicon carbide abrasive grain is designed for durability in use. It is intended for grinding stone and concrete. The best results and the greatest safety are achieved by only using the conical grinding cups together with two-handed angle grinders with a maximum speed of 8500 o o/min. It is suitable for use with two-handed angle grinders with a maximum speed of 8500 o o/min

The SDS plus-5 drill bit guarantees trouble-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling work, so the user is not burdened. The drill is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 1 piece.

The SDS max-9 Stone drill bit has a long lifespan in natural stone. The drill bit has two main cutting edges and two robust side bolts, which extend the lifespan. The drill bit is made of a high-quality carbide material that ensures long life and great durability. The vibration-optimized design with 2+2 grooves also ensures optimal power transmission during drilling. The drill bit is intended for drilling in stone. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, accurate drilling, and efficient fastening. It is compatible with all hammer drills with SDS max holders.
Package of 1 piece.

Auto schoonmaakset, voor hogedrukreiniger

Do not use on shaft bushings. The collet clamps the milling cutter. Always use the correct size collet to avoid danger during use.
Collet

It has a screw closure and can be securely locked with a code. The hood fits angle grinders. The protective shield is intended for general scrubbing and grinding work and is equipped with a cover plate for cutting.
Protective shield with cover plate
with strap coding and screw closure

Collet, 6.35 mm

The reduction ring for circular saw blades has an adjustable holder hole, so the ring fits perfectly on all machines.
Reduction rings for circular saw blades
Stem blade thickness from 1.7 mm to max. 2.2 mm

Schroefbitset voor interne Torx (T) schroeven, met 5 standaard bits in de maten T10, T15, T20, T25 en T30 met 25 mm lengte en 1/4" externe zeskantschacht (ISO 1173 C6.3).

Bosch 5-delige schroevendraaierbitset standaard voor interne Torx schroeven (T) biedt een compacte selectie van veelvoorkomende Torx-maten voor compatibele 1/4" zeskant bithouders, waardoor je eenvoudig de juiste bit bij de schroefkop vindt.

• Inbegrepen bits: T10, T15, T20, T25, T30
• Lengte: 25 mm
• Schachttype: 1/4" externe zeskant, ISO 1173 C6.3

Bitset met drie dubbelzijdige Phillips-bits (PH1-PH1, PH2-PH2, PH3-PH3) met een lengte van 60 mm en een 1/4" externe zeskantschacht.

Bosch 3-delige dubbelzijdige bladset (PH, PH) is ontworpen voor Phillips-schroefkoppen en biedt drie gangbare PH-maten in één compacte set, compatibel met gereedschap met een 1/4" externe zeskant bithouder.

Schroefbit met HEX-schroefkop, maat 3, en 25 mm lengte voor bevestigingstaken met binnenzeskant.

Bosch Standard Hex Screw Bit biedt een bitlengte van 25 mm en een HEX-profiel voor gecontroleerde aangrijping met compatibele schroeven.

Borenset met 9 stuks voor metaal (HSS-R) en steen, met meerdere diameters en lengtes voor werkzaamheden in ferrometalen, staal/ijzer, betonstaal, metselwerk en fijn steengoed.

Bosch drill bit set, 9 pieces: Metal HSS-R/stone bevat metaalboren in 3.0x61, 4.0x75, 5.0x86, 6.0x93, 8.0x117 en steenboren in 4.0x75, 5.0x85, 6.0x100, 8.0x120 voor veelzijdig boren in gangbare materialen.