Screwdriver and drill bit set, for wood, metal, masonry, countersink, twist bit, spade bit, 40 pieces, torx, phillips, pozidriv, hex, slot, length: 25 mm

Screwdriver, drill and socket bit set, for wood, metal, stone, countersink, twist bit, 60 pieces, torx, phillips, pozidriv, hex, slot, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 13 mm, length: 50 mm, 25 mm

Beitel, voor beton, bakstenen, solid brick, concrete building block, sand brick, lime brick, plat, zeskant, lengte: 400 mm, breedte: 35 mm

Pack of 50 Bosch flat dowels

3mm diameter wood twist drill with countersink and a working length of 30mm

Bosch 2609255023

Voor Black & Decker, Bosch, Makita, Metabo, Skil...

HSS countersink drill head with hexagonal shank creates smooth countersinks for screws and deburrs holes in hard materials. The ground countersink drill head made of HSS (high-speed steel) has an optimal surface quality for even work. Outstanding results in hard materials are possible thanks to three 90-degree cutting edges that function continuously, without vibrations or burrs. High power transmission due to the hexagonal shaft provides a flat hole sink. It is suitable for use on non-ferrous metals, steel, and cast iron and has a hexagonal shank system for versatile use. The HSS countersink drill head with hexagonal shank is manufactured according to DIN 335. The best result is achieved by working at low cutting speeds. It can also be used with impact wrenches.

Schuurpapier, voor hout, multiplex, verf, 10 stuks, delta-vormig, korrel: 180

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and power drills. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw installation, making it suitable for all tasks. Drive unit ISO 1173 C6.3, 1/4" external hexagon

Boorset voor metaal, 13 stuks

• Meubelborstel exclusief ontwikkeld voor de Unlimited 10 en 9
• Met 360° draaibaar scharnier en verstelbare hoek voor eenvoudige aanpassing aan oppervlakken
• Zachte, maar grondige reiniging met zachte borstelharen
• Werkt perfect met MicroClean-technologie
• Gemakkelijk te bevestigen
• Hoge kwaliteit voor langdurig plezier

Vergroot de veelzijdigheid en functionaliteit van uw Unlimited 10 en 9 met de bijpassende meubelborstel. Dit originele Bosch-accessoire stelt u in staat de functionaliteit van uw apparaten af te stemmen op uw specifieke behoeften, waardoor dagelijkse taken eenvoudiger en efficiënter worden. De meubelborstel met 360° draaibaar scharnier biedt een optimale aanpassing aan elk oppervlak.

Pakket met 25 stuks.

Saw blade diameter mm: 150Bore size mm / bore with reducer: 20/16Cutting width mm: 2.2Number of teeth: 40 Wood | Acoustic panels

Cirkelzaagblad, voor hout, 184 mm, 24 tanden

Cirkelzaagblad, voor hout, 190 mm, 24 tanden

R574 Best for Metal has an exceptional lifespan when grinding rough surfaces, deburring, removing welds and rust from metal surfaces. Robust and long-lasting abrasive surface coated with zirconia aluminum/semi-fused aluminum oxide grains. The backing material is made of vulcanized rubber, which ensures stability despite long-term work. The abrasive grain is attached using a 100% synthetic resin bond, ensuring exceptional durability for tough tasks. R574 Best for Metal is intended for angle grinders and drills

The set's blades are designed for bayonet saws with a universal shaft system. Bayonet saw blade set for metal, Tough Box, 20 pieces, is the universal choice for efficient cutting in metal. The blades are perfect for fine cuts in a wide range of different metal materials and are also suitable for sawing in steel pipes and steel profiles.
Bayonet saw blade set for metal, Tough Box, 20 pieces, is the universal choice for efficient cutting in metal
The blades are perfect for fine cuts in a wide range of different metal materials
Suitable for cutting steel pipes and profiles

Zaagblad, voor ruw hout, brandhout, 2 stuks, lengte: 240 mm

Long Life Cutting Holes in Stainless Steel
Exceptional durability is built in with Bosch Carbide Technology.
Individually ground teeth made from fine, hard Carbide.
With integrated thread.

Gatenzaagset met 5 stuks met hardmetalen snijkanten en bevat vijf diameters voor boren in steen- en metselwerkmaterialen.

Gatenzaagset met 5 stuks, hardmetalen snijkanten wordt geleverd met diameters 33, 53, 67, 73 en 83 mm en is gespecificeerd voor gebruik op steen, metselwerk, keramiek, tegels, dakpannen, vloertegels, klinker en wandtegels.

Cordless Impact Drill DIYSet EasyImp+Saw

The drill bit for installation work is extremely robust for formwork. The drill bit and shaft end are screwed together, which reduces the risk of breakage and ensures smooth operation. The tool's tapered notch, offset drill head, and shaft end prevent jamming even in damp wood while having enough power to cut through hidden nails. The extra-long shaft makes the drill bit versatile for drilling into multi-layered building materials or sandwich materials, such as within the construction industry (formwork) and for indoor installation work, plumbing work, and electrical installations. The installation drill bit is suitable for formwork, plates, planks, beams, plasterboard sheets lightweight building materials insulation and metal such as metal sheets sandwich materials with steel aluminum or profiled sheets. The installation drill bit is made of HSS (high-speed steel) according to DIN 7490 with a 118-degree angled cutting edge at the top. The cylindrical shaft of the drilling head is compatible with all drills with a 13 mm chuck.
Total length: 600 mm

Fladdyvel-gereedschap biedt een compacte lengte van 55 mm en 19 mm breedte met een hoogte van 4 mm voor nauwkeurig werk in gereedschapstoepassingen.

Fladdyvel staat vermeld onder Hus & Have > Værktøj en wordt geleverd met de opgegeven specificaties voor lengte, breedte en hoogte voor eenvoudige selectie en matching.

Zeskantverlengstuk voor standaard platte freesboren, met een 5.5 mm zeskantschacht en roestvrijstalen afwerking voor houttoepassingen.

Bosch Zeskantverlengstuk voor standaard platte freesboren met 5.5 mm zeskant wordt geleverd als 1 stuk en is compatibel met PBD 40, PSB 850-2 RE, PSB 530 RE, PSB 650 RE, PSB 750 RCE en PSB 850-2 RE.