Boren en bits - pagina 5

Bosch 2609255030 Drill bit set 10 pc(s)

Boor, voor metaal, spiraalboor, 2 stuks, 3.5 mm, lengte: 70 mm

Compatible with SDS plus holder rotary hammers. The SDS plus-5 drill head ensures seamless drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling work, so the user is not burdened. The drill bit is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany.
SDS plus-5 hammer drill set with 3 pieces

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and power drills. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw installation, making it suitable for all tasks. Drive unit ISO 1173 C6.3, 1/4" external hexagon

Diameter (D) mm: 6.00Working length (L1) mm: 100Total length (L2) mm: 160Concrete | Reinforced concrete Stone | Masonry Concrete | Concrete Stone | Natural stone

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the borehead has a 135-degree point and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers.
Package with one piece.

Boorstift, voor beton, plastic, staal, zachthout, soft tile, 7 mm, zeskant, lengte: 100 mm

Boorstift, voor roestvrij staal, zachthout, 3 stuks, PH1, PH2, PH3, zeskant, lengte: 89 mm

Impact screwdriver bit, 2 stuks, torx, T15, zeskant, lengte: 25 mm

The reserve key fits toothed chuck drill chucks. It is important to choose the correct key type (A/B/C/D/F/G)

Wera 867/1 Z TORX schroevendraaierbit 1 stuk(s)

The steering drill bit drill the pilot hole for positioning the hole saw in the correct position. Use this handlebar head for drilling holes in many different types of materials. It can be used with all power-powered and battery-powered screwdrivers.

Set schroevendraaierbits en bitadapters, 31 stuks, torx, phillips, pozidriv, hex

Trimmer line for brush cutter/grass trimmer, 1.6 mm x 15 meters, in a bag

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks. Drive unit ISO 1173 C6.3, 1/4" external hexagon

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The bit's tapered torsion zone easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality, and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks.
Drive unit ISO 1173 C6.3, 1/4" external hexagon

Tegelboor van Bosch met 4.0 mm diameter, 3.3 mm schachtdiameter en 70 mm totale lengte voor het boren in steen en tegels.

Bosch Tile Drill Bit is gespecificeerd voor gebruik met steen, wandtegels en tegels en biedt een nauwkeurige boormaat van 4.0 mm in een compacte lengte van 70 mm.

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The bit's tapered torsion zone easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks

Schroevendraaier bit, 3 stuks, 1/4", phillips, PH2, hexagonaal, lengte: 25 mm

Bosch 2609255032 19 pc(s)

DT2205:100mm TP 2.5mm clean and fast straight cuts in wood, chipboard and plastics x 4
DT2209:100mm 4.2mm TP clean and fast straight cuts in wood, chipboard and plastics x 4
DT2213:100mm x 4.2mm TP fast cuts in wood, chipboard, plywood and MDF x 2
DT2216: 82mm x 2.0 TP fast curve cuts in wood, chipboard and plastics x 1
DT2217: 100mm 2.5mm TP clean and fast straight cuts in hard wood, chipboard, plywood and laminates. Extra long cutting life x 1
DT2218: 100mm 4.2mm TP clean and fast straight cuts in hard wood, chipboard, plywood and laminates. Extra long cutting life x 1
DT2220: 100mm 4.2mm TP fast straight cuts in hard wood, chipboard, plywood and MDF. Extra long cutting life x 1