Boren en bits - pagina 3

Drill bit and chisel set, 7 pieces, 25 mm, 20 mm, 18 mm, 50 mm, 22 mm, SDS-max, length: 400 mm, 540 mm

Hoge kwaliteit afstandhouder van aluminium: de schroefdiepte kan oneindig worden aangepast en maakt het mogelijk om schroeven vlak te monteren.

Impact screwdriver bit, 2 stuks, torx, T20, zeskant, lengte: 25 mm

Centreerboor, voor metaal, aluminium, roestvrij staal, polyvinylchloride (PVC), 7.15 mm, zeskant, lengte: 120 mm

V-Line TiN drill and bit set with ratchet screwdriver and magnetic rod containing 91 pieces

Makita B-29072 niet gecategoriseerd

Bosch 2 609 255 206 boor 1 stuk(s)

Screwdriver bit set, 22 pieces, torx, phillips, pozidriv, hex, length: 25 mm

Boorstiftset, voor beton, plastic, staal, zachthout, soft tile, multimaterial, 4 stuks, 5 mm, 6 mm, 8 mm, 4 mm, cilindrisch, lengte: 75 mm, 85 mm, 100 mm, 120 mm

Tough-absorbing bits for universal use. BiTorsion bits with an elastic torsion zone – where kinetic energy is diverted from peak loads – and softer BiTorsion zone to prevent the bit tip from twisting under high strain. This greatly extends the product service life. Offer the best possible service life with the appropriate holder. Comes with Rapidaptor technology, which allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward – for rapid bit change with just one hand. For the take-up of bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3 und E 6.3. For insertion in the power screwdriver or into the chuck of the power drill. The multi-component Bit-Check is convincing on account of its low weight and the maximum possible degree of compactness. In this respect, the soft material in the lower section of the Bit-Check ensures that the bits are securely held whilst being simple to remove at the same time. The profile and size of the bits are easy to recognise thanks to the Wera "Take it easy" Tool Finder with its colour coding and clearly visible imprint.

Bahco 2058/S26 schroevendraaierbit 18 stuk(s)

For drilling into concrete, masonry, natural and artificial stone, brick, etc. Rotary/percussion masonry carbide tip drill bit

Zuil-adapter, 1/4", square, zeskant, lengte: 50 mm

The flat drill is made of hardened steel with a centering point for precise drilling. The adjustable flat drill ensures high flexibility when drilling. The flat drill has a wedge-shaped blade with a screw for locking and feeding, which can be adjusted from 15-45 mm. The flat drill is ideally suited for general drilling tasks where larger holes of different diameters are required. The drill is suitable for medium-hard and soft wood as well as lighter building materials and wood panels.
Adjustable flat milling cutter, Ø 15 - 25 mm, Ø 25 - 45 mm

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The pointed torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 10 pieces.

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and power drills. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hardness quality, allowing sufficient performance for all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw installation, making it suitable for all tasks. Screwdriver bit pack extra hard (PZ) with 3 pieces

Bosch 2 609 255 036 drill bit 2 pc(s)

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Package contains 2 pieces.

Solo 2000 RPM 1,3 kg Zwart, Grijs, Rood

Hogesnelheidsfrees, voor zachthout, hardhout, speedboor, plat, 6 stuks, 25 mm, 13 mm, 20 mm, 16 mm, 22 mm, 19 mm, zeskant

Milling cutter bit, for softwood, hardwood, Straight, 3 mm, length: 51 mm

Decoupeerzaagblad levert een T 308 BF-type zaagsnede met 2.2 XC mm tandafstand en een totale lengte van 117 mm (91 mm getande lengte) voor houtbewerkingsklussen.

Bosch Jigsaw Blade BIM, T 308 BF is gespecificeerd voor houtmaterialen waaronder hardhout/massief hout, spaanplaat, gelamineerde MDF- en HDF-platen en akoestische panelen.

The reserve key fits toothed chuck drill chucks. It is important to choose the correct key type (A/B/C/D/F/G)

Schroefbit, voor roestvrij staal, zachthout, 1/4", phillips, PH2, zeskant, lengte: 152 mm