Boren en bits - pagina 4

Boor, voor metaal, spiraalboor, 2 stuks, 3.5 mm, lengte: 70 mm

Schroevendraaier met bitset, 46 stuks, in koffer

The reserve key fits toothed chuck drill chucks. It is important to choose the correct key type (A/B/C/D/F/G)

Chuck key, 6 mm, length: 110 mm

Boorstift, voor graniet, gehard beton, gneis, gehard verstevigd beton, hamerboor, 16 mm, SDS-plus, lengte: 265 mm

Boorstift, voor beton, versterkt beton, graniet, gehard beton, gneis, hamerboor, 6 mm, SDS-plus, lengte: 215 mm

Boorset voor hout, 8 stuks

SDS plus pointed chisel 250 mm
SDS plus flat chisel 250 mm
SDS plus-1 hammer drill bit 5 x 50 x 110 mm
SDS plus-1 hammer drill bit 6 x 50 x 110 mm
SDS plus-1 hammer drill bit 6 x100x160mm
SDS Plus -1 Hammer Drill Bit,7x50x110mm
SDS Plus -1 Hammer Drill Bit,7x100x160mm
SDS Plus -1 Hammer Drill Bit,8x50x110mm
SDS Plus -1 Hammer Drill Bit,8X100X160MM
SDS PLUS-1 HAMMER DRILL BIT ,10 X100X160MM
SDS PLUS-1 HAMMER DRILL BIT ,12 X100X160MM

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and power drills. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hardness quality, and enables sufficient performance in all tasks. The pointed torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw installation, making it suitable for all tasks

Boorstift, voor beton, plastic, staal, zachthout, soft tile, multimaterial, 6 mm, zeskant, lengte: 100 mm

Impact screwdriver bit, 2 stuks, torx, T25, zeskant, lengte: 25 mm

2 x Bosch professionele schroevendraaierbits T10 inzetbit - lengte 25 mm, zeshoekige schacht.

Boorstift, voor versterkt beton, graniet, gehard beton, gneis, armed concrete, hamerboor, 6 mm, SDS-plus, lengte: 115 mm

Socketset

Beitelset, voor beton, tegels, gewapend beton, bakstenen, platte beitel, puntbeitel en spadebeitel. 3 stuks SDS-plus met een lengte van 260 mm en 250 mm

Boor, voor metaal, spiraalboor, 2 stuks, 3 mm, lengte: 61 mm

Boorstift, voor spaanplaat, zachthout, spaanplaat, speedboor, 20 mm, zeskant, lengte: 400 mm

Boorstift, voor beton, plastic, staal, zachthout, soft tile, 7 mm, zeskant, lengte: 100 mm

Boorstift, voor beton, plastic, staal, zachthout, soft tile, multimaterial, 6 mm, cilindrisch, lengte: 150 mm

Dubbele bit voor Phillips (PH) en sleufschroeven (S), met 45 mm lengte en 1/4" externe zeskantschacht.

Dubbele bit voor Phillips (PH) en sleuf (PH, S) omvat S1.0x5.5-PH2, ontworpen voor gebruik met compatibele 1/4" zeskant bithouders.

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks. Drive unit ISO 1173 E6.3, 1/4" external hexagon

Boor, 16 mm, SDS-plus, lengte: 265 mm

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the borehead has a 135-degree point and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers.
Package with one piece.