Boren en bits - pagina 49

The CYL-9 Ceramic tile drill head is a standard drill head for drilling in tiles. The practical drill head is suitable for dry drilling without cooling. The simple design without notches is particularly suitable for drilling in soft to medium-hard tiles. Drilling without impact function at low speeds. The drill head is compatible with power and battery-powered drills with a cylindrical shaft system.
Package of 1 piece.

Router bit, for wood, solid wood, hardwood, composite wood, Dado, 8 mm, length: 52 mm

Boor, spiraalboor, 8 mm, cilindrisch, lengte: 117 mm

Boorset, spiraalboor, 7 stuks

Boor, voor metaal, spiraalboor, 10 stuks, 9.5 mm, lengte: 125 mm

Schroevendraaier bit, 3 stuks, torx, T30, hexagonaal, lengte: 25 m

Boor, voor zacht hout, hardhout, centreerpuntboor, 10 mm, cilindrisch, lengte: 120 mm

Routerbit, voor zachthout, hardhout, afronding, 36.7 mm, lengte: 70 mm

Boor, voor plastic, spaanplaat, massief hout, Corian, medium-density fibreboard (MDF), 20 mm, recht, lengte: 56 mm

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill bit is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill bit's efficient U-shape with 2 flutes ensures effective dust removal, less friction, reduced heat development and wear, and extends the life of the drill bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill bit is PGM-certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling, and efficient fastening. The drill bit is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package with 1 piece.

Drill bit, for concrete, masonry, hammer bit, 20 mm, SDS-plus, length: 300 mm

Schroevendraaierset met 11 stuks inclusief een flexibele plastic verlenging (300 mm).

The CYL-5 drill bit head guarantees extra long lifespan when drilling in concrete and stone. The carbide material developed by Bosch, combined with diamond-ground cutting edges, provides an extremely durable drill bit head. The variable design with 2 flutes and a short, variable pitch significantly reduces flute friction and ensures effective dust removal and less wear. The Bosch Power Grip shank system enables 100% power transfer from the machine to the drill bit head. This means that the power is optimally utilized directly for the drilling task, and reduced power loss means less wear. For drilling fixing holes in concrete, natural stone, and artificial stone materials. The drill bit head is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, accurate boreholes, and efficient fastening. The drill bit head is compatible with cylindrical shank systems for all powered or battery-powered hammer drills.
Package of 1 piece.

Cirkelzaagblad, voor hout met spijkers, 5 stuks, lengte: 190 mm, breedte: 19 mm

Keyless chuck, for wood, metal, 0.8-10 mm

Routerbit voor hout, afrondfrees, lengte: 53 mm

Bosch 2 609 256 902 boor 1 stuk(s)

Boorset, voor metaal, spiraalboor, 25 stuks

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral bore head is manufactured according to DIN 338. The bore head is of type N (not angle) with a 135-degree point and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the bore head) and is intended for use in drilling stands and screwdrivers.
Package with one piece.

Boor, spiraalboor, 4 mm, cilindrisch, lengte: 75 mm (pak van 2)

Drill bit, for concrete, masonry, hammer bit, 22 mm, SDS-plus, length: 250 mm

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, extending the life of the bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.

Metal drill 7 pcs, Wood drill 7 pcs, Masonry drill 7 pcs and 25 pcs bit set