Boren en bits - pagina 48

Makita D-00228 boor

Boorstift, voor metaal, 5 mm, lengte: 86 mm, voor Makita DHP482RTJ

Boorstift, voor hout, houtboor, 10 mm, zeskant, lengte: 130 mm, voor Makita DHP482RTJ

Chisel, for concrete, masonry, flat, SDS-plus, length: 250 mm, width: 20 mm, for Makita DHK180Z, DHR243RTJ, DHR243Z

Impact schroevedraaierbitset, 5 stuks, torx, phillips, pozidriv, T25, T30, PH2, PZ2, PZ3, zeskant, lengte: 50 mm

Boor, voor beton, metselwerk, hamerboor, 6 mm, SDS-plus, lengte: 465 mm

Boorstift, voor spaanplaat, zachthout, spaanplaat, speedboor, 36 mm, zeskant, lengte: 400 mm

Bosch SDS-Quick multi-purpose drill bits

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the borehead has a 135-degree point and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers.
Package with 10 pieces.

Boorstift, voor hout, triplex, zachthout, hardhout, gefineerd hout, houtboor, 3 mm, cilindrisch, lengte: 60 mm

Boorstiftset, 31 stuks

Boorstiftset, 31 stuks, 1/4"

Ratel schroevendraaier met bit set, 38 stuks, in draagtas

Schroevendraaier- en boorset, voor hout, metaal, beton, 76 stuks

Schroevendraaierbitset met 10 stuks voor 1/4" aandrijving, met Phillips-, Pozidriv- en sleufpunten in 25 mm lengte en inclusief een magnetische bithouder.

Bosch Schroevendraaierbitset - 10 stuks bevat PH1, PH2, PH3, PZ1, PZ2, PZ3, SL4.5, SL5.5 en SL8.0 bits, ontworpen voor gebruik met Bosch PushDrive voor veelzijdige bevestigingsklussen.

Double-Ended Bits are an excellent choice for any DIY enthusiast. Thanks to their versatility and high-quality construction, this set is perfect for both home and garden projects. They are easy to use, ensuring efficiency and precision in every task.

Boschfilter for gas 35 hafc ptfe

Boorstift, voor beton, metselwerk, versterkt beton, 20 mm, SDS-max, lengte: 320 mm

It is compatible with all rotary hammers with SDS max holders. The SDS max-4 drill head has a head with four cutters, which guarantees long life in concrete. The special design with four cutters ensures a long service life without jamming when drilling into reinforced concrete. The U-shaped design with 2 notches extends the life and ensures effective dust removal. The drill head's wear-resistant carbide material reduces wear during drilling, further extending its lifespan. The drill bit is intended for use on concrete and masonry.
Package of 1 piece.

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Package contains one piece.

The SDS plus pointed chisel is ideal for precision tasks in concrete without interruptions and with less jamming than standard pointed chisels. The self-sharpening twisted edge provides a wider material removal and a more even workflow without interruptions. The chisel is intended for use in concrete and bricks for adaptation work, destruction or removal of walls, renovation of joints, and clearing of reinforcements. The SDS plus pointed chisel provides a 30% longer lifespan and a 15% higher speed for material removal than standard chisels. It is compatible with an SDS plus chisel attachment or can be used directly in SDS plus rotary hammers with rotation stop.Spiked Chisel with 30% Longer Lifespan and 15% Higher Material Removal Speed
SDS Plus Pointed Chisel is Ideal for Precision Tasks in Concrete Without Interruptions and With Less Risk of Jamming

Bosch Expert for Wood afrondprofielfrezen

Boorstift, voor metselwerk, steen, bakstenen, blocks, light concrete, spiraalboor, 8 mm, cilindrisch, lengte: 150 mm, voor Makita DHP482RTJ

IRWIN 10501932 boor Steenboor

Core cutter, for concrete, masonry, limestone, 90 mm, SDS-max, length: 550 mm