Boren en bits - pagina 51

Expert for Wood Rounding Over-head is designed for long life and intense, daily use to achieve cuts without splinters. The drill head is internally manufactured using unique Microteq carbide for great durability and high performance when used on wood. It has a protective coating that protects it from friction buildup, rust, and height, which extends the drill head's outstanding cutting life. The drill head's cutting angle design also provides a cut for particularly clean surfaces with minimal repolishing. Expert for Wood Rounding Over-head is intended for easy rounding of edges and decorative applications in soft and hard solid wood, composite wood, and special materials such as solid surfaces. The ball bearing makes it easy to control the tool directly on the workpiece without shielding. In addition, the size of the ball bearing can be changed so that the milling cutter can be used for different rounded profiles. It is suitable for use with handheld routers and table-mounted portable routers.

The Bosch HSS-R metal drill bit, measuring 12x101x151 mm, is an excellent choice for anyone looking for a reliable tool for drilling metal. Thanks to the use of high-quality high-speed steel, this drill bit guarantees long-lasting performance and precision on every project.

The SDS plus-5 drill bit ensures problem-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling work, so the user is not burdened. The drill bit is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 1 piece.

Diameter mm x length mm: 5.5x100; 6.0x100; 7.0x100
Concrete|Concrete Stone|Natural Stone|Masonry Concrete|Reinforced concrete

Boor, voor beton, metselwerk, steen, 5 mm, cilindrisch, lengte: 85 mm

Diameter mm: 7Working length mm: 100Total length mm: 160Stone | Masonry Stone | Granite Concrete | Reinforced concrete

Universele borenset bevat 4 Bosch-boren in 4.0x75, 5.0x85, 6.0x100 en 8.0x120 voor veelzijdig boren in steen, metselwerk, tegels, hout, staal/ijzer en beton, inclusief gewapend beton.

Bosch 4-piece Universal drill bit set is ontworpen om een breed scala aan materialen aan te kunnen—van fijn steengoed en dakpannen tot akoestische panelen en wapeningsstaal—en is daarmee een praktische set voor gemengde boortaken.

Glas- en tegelboor van Bosch met een diameter van 4.0 mm en een totale lengte van 64 mm voor boren in natuurlijke materialen zoals glas, steen en wandtegels.

Bosch Glass and Tile Drill Bit is ontworpen voor nauwkeurige boortaken in harde, gladde oppervlakken, met specificaties die duidelijk geschikt zijn voor veelvoorkomend werk op glas, steen en tegels.

Houtboorset met drie maten (6.0, 8.0 en 10.0 mm) en een cilindrische schacht voor boren in houtmaterialen.

Bosch 3-piece Wood Drill Bit Set bevat boren voor gebruik in hard/massief hout, zachthout en akoestische panelen, en biedt een kleine, praktische selectie voor veelvoorkomende houtboortaken.

Platte speedboor met zeskantschacht voor gebruik met een boormachine, met een boordiameter van 30 mm en een totale lengte van 165 mm.

Bosch Flat Spade Drill Bit, hex bevat 1 boor met een schachtdiameter van 5.5 mm en 120 mm werklengte, geschikt voor boren in zachthout en middelhard hout.

Drill bit set, hammer bit, 5 pieces, 5 mm, 6 mm, 8 mm, 10 mm, SDS-plus, length: 115, 165 mm

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering tip of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral bore head is manufactured according to DIN 338. The bore head is of type N (notch angle) with a 135-degree tip and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the bore head) and is intended for use in drilling stands and screwdrivers.
Package with one piece.

Bosch HSS-R Metal drill bit with a diameter of 14mm and a working length of 108mm

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The bit's tapered torsion zone easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks

Boor, spiraalboor, 14 mm, cilindrisch, lengte: 600 mm

Boor, voor zacht hout, hardhout, brad point boor, 20 mm, cilindrisch, lengte: 200 mm

Drill bit, for wood, metal, twist bit, 22 mm, SDS-plus, length: 400 mm

Boorset, voor metaal, spiraalboor, 9 stuks, zeskant

Boorset, voor zacht hout, hardhout, slangenboor, 6 stuks, 10 mm, 12 mm, 14 mm, 20 mm ,18mm ,16mm ,zeskantig (hex), lengte: 235mm

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, extending the life of the bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.

Boor, voor hout, slangenboor, 18 mm, zeskantig, lengte: 600 mm

Bosch 2609255076 Twist drill bit 1 pc(s)

Bosch 2 609 255 028 drill bit