Boren en bits - pagina 26

Boorstift, voor beton, versterkt beton, graniet, gehard beton, gneis, hamerboor, 8 mm, SDS-plus, lengte: 215 mm (pak van 10)

Boorstift, voor spaanplaat, zachthout, spaanplaat, speedboor, 36 mm, zeskant, lengte: 152 mm

Boorstift, voor spaanplaat, zachthout, spaanplaat, speedboor, 28 mm, zeskant, lengte: 400 mm

Boorstift, voor hout, triplex, zachthout, hardhout, gefineerd hout, houtboor, 12 mm, cilindrisch, lengte: 155 mm, voor Makita DHP482RTJ

The drill bit for installation work is extremely robust for formwork. The drill bit and shaft end are screwed together, which reduces the risk of breakage and ensures smooth operation. The tool's tapered notch, offset drill head, and shaft end prevent jamming even in damp wood while having enough power to cut through hidden nails. The extra-long shaft makes the drill bit versatile for drilling into multi-layered building materials or sandwich materials, such as within the construction industry (formwork) and for indoor installation work, plumbing work, and electrical installations. The installation drill bit is suitable for formwork, plates, planks, beams, plasterboard sheets lightweight building materials insulation and metal such as metal sheets sandwich materials with steel aluminum or profiled sheets. The installation drill bit is made of HSS (high-speed steel) according to DIN 7490 with a 118-degree angled cutting edge at the top. The cylindrical shaft of the drilling head is compatible with all drills with a 13 mm chuck.
Total length: 400 mm

The drill bit has a hexagonal shaft system and is compatible with all screwdrivers with a 13 mm chuck. The spiral drill bit is suitable for quick and precise drilling when drilling through holes, pre-drilling for rafter nails, and drilling deep dowel holes in wood. The powerful self-feeding tip pulls the bit all the way through, ensuring fast and precise drilling with low power consumption. The optimized low-friction geometry of the bit with solid core ensures straight holes, high chip removal, and higher working speed. The optimized guide edge of the bit and precision-ground head cutting edge produce precise holes. Suitable for use in construction trades, by carpenters and roofers, it is suitable for both softwood and hardwood
Total length 450 mm

Boor, voor metaal, spiraalboor, 10 stuks, 4.5 mm, lengte: 80 mm

Bit set

Beton boor

Boor, kegelboor, 12 mm, cilindrisch, lengte: 600 mm

Spaakwielborstel, voor verf, roest, coating, 4 stuks, 63 mm, 75 mm, 100 mm, cilindrisch, voor Makita DHP453, DHP453RFEW

Boorstift, spiraalboor, 5 stuks, 12.5 mm, cilindrisch, lengte: 151 mm

Boorbitset met 5 metselboren in de maten 4.0x75, 5.0x85, 6.0x100, 8.0x120 en 10.0x120 mm.

5-delige metselboorbitset is bedoeld voor het boren in steen- en metselwerkmaterialen, waaronder kalkzandsteen, kunststeen, natuursteen en beton (inclusief gewapend beton).

Boorstift, voor metaal, 6 mm, lengte: 93 mm

Schroefbit, 3 stuks, torx, T15, zeskant, lengte: 50 mm

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly, so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package with one piece.

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, extending the life of the bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.

Boorstift, voor beton, versterkt beton, graniet, gehard beton, gneis, hamerboor, 8 mm, SDS-plus, lengte: 165 mm (pak van 10)

Boorstiftset, voor metaal, 19 stuks

Routerbit, voor zachthout, hardhout, 20.7 mm, lengte: 53 mm

Schroefbit, 3 stuks, pozidriv, PZ2, zeskant, lengte: 25 mm

Krachtige dopbit, 8 mm, zeskant, lengte: 50 mm

DeWALT DT90301-QZ gatenzaag

DeWALT DT90331-QZ gatenzaag