Boren en bits - pagina 28

The drill bit for installation work is extremely robust for formwork. The drill bit and shaft end are screwed together, which reduces the risk of breakage and ensures smooth operation. The tool's tapered notch, offset drill head, and shaft end prevent jamming even in damp wood while having enough power to cut through hidden nails. The extra-long shaft makes the drill bit versatile for drilling into multi-layered building materials or sandwich materials, such as within the construction industry (formwork) and for indoor installation work, plumbing work, and electrical installations. The installation drill bit is suitable for formwork, plates, planks, beams, plasterboard sheets lightweight building materials insulation and metal such as metal sheets sandwich materials with steel aluminum or profiled sheets. The installation drill bit is made of HSS (high-speed steel) according to DIN 7490 with a 118-degree angled cutting edge at the top. The cylindrical shaft of the drilling head is compatible with all drills with a 13 mm chuck.
Total length: 400 mm

Boorhamerbitset met SDS-plus schacht, met 6 Bosch bits in diameters van 5, 6, 8 en 10 mm met lengtes van 110 mm en 160 mm, geleverd in een kunststof cassette.

Bosch SDS-plus S2 bevat zes boorhamerbits ontworpen voor SDS-plus gereedschap en gespecificeerd voor gebruik met Bosch UniversalHammer 18V, en biedt je een praktisch assortiment maten en lengtes voor verschillende boorklussen.

Wera Impaktor holder for the absorption of extreme impulse peaks. Special torsion effect thanks to the double-torsion spring. The Impaktor holder additionally holds long and heavy screws absolutely securely. This enables a rapid and dependable positioning of the screw. Ideal also for overhead work. Should, situation-related, the magnet not be desired e.g. when working with metal, it can be removed from the screwdriving zone and thereby be neutralised. Used mostly for manual power tool applications. Output: suitable for bits with ¼” hexagon head drive as per DIN ISO 1173-C 6.3. Drive: ¼” hexagon, suitable for power screwdrivers with take-up as per DIN ISO 1173-F 6.3.

6 50 mm-long Wera bits tidily arranged in a minimum of space in a practical Bit-Check. The tough viscous bits are suitable for universal use. In the case of the Torsion bits (TZ), torque peaks are additionally absorbed in the Torsion zone. This prevents premature wear and enhances the service life.

Bit-Check die rechtop kan worden geplaatst met hoogwaardige bits van roestvrij staal. Wera roestvrijstalen gereedschappen zijn vervaardigd uit roestvrij staal, waardoor de vorming van onooglijke externe roest wordt voorkomen. 29 Wera-roestvrijstalen bits. 1 roestvrij stalen Rapidaptor snelwisselhouder. De meercomponenten Bit-Check overtuigt door zijn lage gewicht en maximale compactheid. In dit opzicht zorgt het zachte materiaal in het onderste gedeelte van de Bit-Check ervoor dat de bits veilig worden vastgehouden terwijl ze tegelijkertijd eenvoudig te verwijderen zijn. Het profiel en formaat van de bits zijn gemakkelijk te herkennen dankzij de Wera "Take it easy" Tool Finder met kleurcodering en duidelijk zichtbare opdruk.

Boorset voor metaal, 6 stuks, 5 mm, 6 mm, 8 mm, 4 mm, 3 mm, 2 mm

Makita E-20199 SDS-PLUS tile chisel 75x165

Drill up to nine different diameter holes Clean and accurate cuts in the toughest materials Ideal for electrical and plumbing.

Screwdriver and drill bit set, for wood, metal, masonry, countersink, twist bit, spade bit, 40 pieces, torx, phillips, pozidriv, hex, slot, length: 25 mm

Screwdriver, drill and socket bit set, for wood, metal, stone, countersink, twist bit, 60 pieces, torx, phillips, pozidriv, hex, slot, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 13 mm, length: 50 mm, 25 mm

Beitel, voor beton, bakstenen, solid brick, concrete building block, sand brick, lime brick, plat, zeskant, lengte: 400 mm, breedte: 35 mm

Drill bit set Dewalt DT9288-QZ, for concrete, straight, 3 mm x 12 cm, 8 pcs.

Chisel set, flat, point, spade, 5 pieces, SDS-max, length: 250 mm

Makita D-00072 boor

High quality bits, optimised for Asian PH screws. In particular, for applications with very small dimensions pursuant to the Japanese Camera Industrial Standard. Tough viscous for universal use. ¼” hexagon, suitable for holders as per DIN ISO 1173-F 6.3.

3mm diameter wood twist drill with countersink and a working length of 30mm

Bosch 2609255023

Spaakwielborstel, voor hout, metaal, 38 mm, zeskant, voor Makita DDF485RTJ, DDF486Z, DDF487RAJ

Voor Turbotrimmer Art. Nr. 8844, 8845, 9824

Gatenzaagpakket, 6 stuks, 25 mm, 32 mm, 20 mm, 40 mm, 65 mm, 51 mm, met zes punten, 13 mm, voor Makita DHP453, DHP453RFEW

Robust Bit-Check by Wera. Bit-Checks provide a quick overview of the tools available. Bits not needed are simply reinserted into the set and do not get lost. Simple transportation e.g. in the shirt pocket. Includes universal holder with strong permanent magnet for the take-up of bits with ¼” hexagon head drive. Can be inserted in the power screwdriver or for use in the chuck of the electric drill. Multi-component Bit-Check that can be positioned upright for permanently secure bit storage.

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and power drills. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw installation, making it suitable for all tasks. Drive unit ISO 1173 C6.3, 1/4" external hexagon

Boorset voor metaal, 13 stuks

Schroevendraaier bit, 10 stuks, torx, phillips, pozidriv, lengte: 25 mm

DeWALT DT90296-QZ gatenzaag