Boren en bits - pagina 25

Boorstift, voor spaanplaat, zachthout, spaanplaat, speedboor, 32 mm, zeskant, lengte: 152 mm

Multifunctionele boor voor het boren van metaal, hout, steen en meer 5.5x160xcyl

Bosch 2 609 255 057 drill bit

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks. Drive unit ISO 1173 E6.3, 1/4" external hexagon

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 5 pieces.

Schroevendraaier bit, 3 stuks, torx, T15, hexagonaal, lengte: 25 mm

Boor, voor hout, centreerpuntboor, 10 mm, lengte: 120 mm

Boor, voor hout, slangenboor, 16 mm, zeskantig, lengte: 235 mm

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, extending the life of the bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 10 pieces.

Diameter mm: 45.0Shaft diameter mm: 10Total length mm: 90
Wood|Hardwood/solid woodWood|SoftwoodWood|Acoustic panels

Core cutter, for concrete, masonry, SDS-plus, length: 175 mm

Routerbit, voor zachthout, hardhout, 8 mm, lengte: 40 mm

Steenboor vervaardigd volgens ISO 5468, met een diameter van 12.0 mm en een schacht van 9.0 mm, ontworpen voor boren in steen- en metselwerkmaterialen, waaronder beton en gewapend beton.

Bosch Stone Drill Bit according to ISO 5468 heeft een werklengte van 550 mm en een totale lengte van 600 mm, en is geschikt voor steen, metselwerk, kalkzandsteen, kunststeen, natuursteen, fijn steengoed en betontoepassingen.

The Bosch HSS-R metal drill bit, with an 11 mm diameter and 142 mm length, combines excellent performance with versatility. Ideal for occasional use, it's suitable for a variety of projects, both in home workshops and professional environments.

Display

Boor, voor metaal, spiraalboor, 5.5 mm, lengte: 93 mm

Routerbit, voor massief hout, zachthout, afronding, 42.7 mm, lengte: 66 mm

Drill bit, for concrete, masonry, hammer bit, 10 mm, SDS-plus, length: 1005 mm

Core cutter adapter, hex, length: 88 mm

Boorstift, voor spaanplaat, zachthout, spaanplaat, speedboor, 36 mm, zeskant, lengte: 152 mm

Boorstift, voor spaanplaat, zachthout, spaanplaat, speedboor, 28 mm, zeskant, lengte: 400 mm

The drill bit has a hexagonal shank system and is compatible with all screwdrivers with a 13 mm chuck. The spiral drill bit is suitable for quick and precise drilling when drilling through holes, pre-drilling for rafter nails, and drilling deep dowel holes in wood. The powerful self-feeding tip pulls the drill bit all the way through, ensuring fast and precise drilling with low power consumption. The optimized low-friction geometry of the drill bit with solid core ensures straight holes, high chip removal, and higher working speed. The optimized guide edge of the drill bit and precision-ground main cutting edge produce precise holes. Suitable for use in construction trades, by carpenters and roofers, it is suitable for both softwood and hardwood
Total length 160 mm

It is suitable for use with angle grinders. The Dry Speed diamond blade provides long life when dry drilling in hard ceramic materials. Its premium diamonds provide very high drilling speeds, and its vacuum brazing technology ensures a long lifespan. This product is intended for tiles, from soft wall tiles to very hard floor tiles, such as stoneware