Boren en bits - pagina 23

Boorstift, voor hout, zachthout, hardhout, composietmaterialen, speedboor, 10 mm, zeskant, lengte: 150 mm

Boorstift, voor metselwerk, steen, bakstenen, blocks, light concrete, spiraalboor, 5 mm, cilindrisch, lengte: 85 mm, voor Makita DHP482RTJ

Schroefbitset, 3 stuks, pozidriv, PZ1, PZ2, PZ3, zeskant, lengte: 50 mm

Boorstift, voor hout, bakstenen, luxe steensoorten, deuren, shelves, window frames, 4 mm, lengte: 70 mm

The drill holder for drill hammers can be converted from an SDS max shaft to an SDS plus hammer drill bit

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, and extends the life of the bit. The drill head provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling, and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.

Boor, spiraalboor, 10 stuks, 4.5 mm, cilindrisch, lengte: 80 mm

3mm diameter wood twist drill with countersink and a working length of 30mm

The dowel drill bit with a countersink effectively drills, countersinks, and chamfers in one step in wood. Mounted on a dowel drilling head, it solves all three tasks cheaply and efficiently. The countersink is suitable for hard and soft wood, laminated and non-laminated chipboards, and plywood. This multifunctional bit made of tool steel has a 90-degree countersinking angle, five cutting edges, and can also be used as a depth stop. The countersink comes with a hex key, dowel drilling head, and holder-mounted countersink. The countersink is intended for drill stands and screwdrivers.

Boor, spiraalboor, 10 stuks, 4 mm, cilindrisch, lengte: 75 mm

Boorset, voor hout, beton, steen en ferrometaal. Inclusief hamerboor. 3 stuks: 5 mm, 6 mm en 8 mm. SDS-quick aansluiting met een lengte van 100mm en 120mm

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the bit has a 135-degree point and a diameter tolerance of h8. It has a cylindrical shank system (the shank has the same diameter as the bit) and is intended for use in drilling stands and screwdrivers.
Package with 10 pieces.

Routerbit, Recht, 4 mm, lengte: 51 mm

It is compatible with SDS max shaft systems. The SDS max chisel with hex holder can be used for standard chiseling for various demolition tasks in concrete and bricks. The chisel has a wide cutting edge and provides high speed material removal in masonry and mortar. The chisel is intended for removing plastering, layers of dirt, as well as concrete residue from formwork boards. It can also be used in the renovation of steel structures.Spade Chisel
SDS max spade chisel for standard chiseling for various demolition tasks in concrete and bricks

Houtboorset, 3-delig, met cilindrische schachten en drie diameters voor werken in een breed scala aan houtachtige materialen.

Houtschachtset, 3-delig bevat boren met diameters 15.0–6.0 mm, 15.0 mm en 15.0 mm, elk met 6 mm schachtdiameter en totale lengtes van 65 mm, 60 mm en 48 mm, geschikt voor materialen zoals massief hardhout, zachthout, multiplex, spaanplaat, MDF, HDF, multiplexplaat en gelamineerd hout.

Boorstiftset, voor metaal, 19 stuks

Drill bit set, for metal, 19 pieces, 1-10 mm

Borenset voor metaal met 19 HSS-R boren volgens DIN 338, met cilindrische schachten en een breed bereik aan diameters van 1.0 tot 10.0 mm.

Bosch HSS-R, DIN 338 omvat boorlengtes van 34 tot 133 mm en is geschikt voor ferrometalen zoals gelegeerd/ongelegeerd staal, staal/ijzer en grijs gietijzer, evenals kunststoffen zoals Styrofoam.

• 19-delige set
• Diameterbereik: 1.0–10.0 mm
• Cilindrische schacht

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the borehead has a 135-degree point and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers.
Package with 10 pieces.

Schroevendraaierbitset met drie standaard bits voor sleufschroeven, 25 mm lengte, en een 1/4" externe zeskantschacht (ISO 1173 C6.3).

Bosch 3-delige schroevendraaierbitset standaard voor sleufschroeven (S) bevat S0,6x4,5, S0,8x5,5 en S1,2x6,5, ontworpen voor gereedschap met een 1/4" externe zeskant bithouder.

Hamerboor met SDS plus-schacht, 16 mm diameter en 550 mm werklengte voor het boren in steen, metselwerk, graniet, beton en gewapend beton.

Bosch Hammerbor SDS plus heeft een gespecificeerde totale lengte van 610 mm en is ontworpen voor SDS plus-compatibele hamerboortoepassingen in gangbare minerale bouwmaterialen.

Diameter mm
30.0
Shaft diameter mm
Total length mm
90