Boren en bits - pagina 22

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 10 pieces.

Boor, voor metaal, spiraalboor, 10 stuks, 7.5 mm, lengte: 109 mm

This drill head is compatible with a 1/4 inch hexagonal shaft system for versatile use with screwdrivers, impact wrenches, and drill stands. The Impact Control HSS spiral bit provides extremely robust drilling in metal, especially with screwdrivers. The extremely strong core is extremely robust. The spiral hammer bit is precision ground from solid metal and has an oxidized notch that gives it outstanding surface quality for cutting through materials with reduced wear. It is suitable for use on alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, sheet metal and plastic.
Package of 8 pieces (index)

Boor, spiraalboor, 3 mm, cilindrisch, lengte: 61 mm (pak van 2)

Routerbit, voor zachthout, hardhout, 14 mm, lengte: 51 mm

Schroevendraaier bit set, 25 stuks, torx, phillips, pozidriv, sleufkop, lengte: 25 mm

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) has a 135-degree point and a diameter tolerance of h8. It has a cylindrical shank system (the shank has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers.
Package with two pieces.

Boor, voor hout, spiraalboor, 3 mm, cilindrisch, lengte: 61 mm

Boor, voor beton, metselwerk, kalksteen, gewapend beton, hamerboor, 35 mm, SDS-max, lengte: 1320 mm

Routerbit, 8 mm, lengte: 56 mm

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks.
Drive unit ISO 1173 C6.3, 1/4" external hexagon
with reduced diameter at the bit output, suitable for countersinking screws

Diamantboorset, voor tegels, vloertegels, fijn steengoed, 3 stuks, 6 mm, 8 mm, 10 mm en 13 mm

Gatenzaag levert HSS-bimetaal zaagprestaties met een diameter van 73 mm voor bewerking in ferrometalen, staal/ijzer, roestvast staal/Inox, plaatmetaal, houtachtige platen en laminaat/kunststoffen.

HSS-bimetaal gatenzaag is gespecificeerd met diameter 73 mm en is vermeld voor materialen waaronder staal/ijzer metaal, carrosserieplaat, roestvast staal/Inox, vertind plaatstaal, spaanplaat, multiplex/timmerplaat, gelamineerde MDF-plaat, HPL-laminaat, constructiehout en laminaat HPL.

Bosch 2609255934 screwdriver bit 1 pc(s)

The drill holder for drill hammers can be converted from an SDS max shaft to an SDS plus hammer drill bit

Routerbit, Recht, 4 mm, lengte: 51 mm

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, and extends the life of the bit. The drill head provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling, and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.

It is compatible with SDS max shaft systems. The SDS max chisel with hex holder can be used for standard chiseling for various demolition tasks in concrete and bricks. The chisel has a wide cutting edge and provides high speed material removal in masonry and mortar. The chisel is intended for removing plastering, layers of dirt, as well as concrete residue from formwork boards. It can also be used in the renovation of steel structures.Spade Chisel
SDS max spade chisel for standard chiseling for various demolition tasks in concrete and bricks

The dowel drill bit with a countersink effectively drills, countersinks, and chamfers in one step in wood. Mounted on a dowel drilling head, it solves all three tasks cheaply and efficiently. The countersink is suitable for hard and soft wood, laminated and non-laminated chipboards, and plywood. This multifunctional bit made of tool steel has a 90-degree countersinking angle, five cutting edges, and can also be used as a depth stop. The countersink comes with a hex key, dowel drilling head, and holder-mounted countersink. The countersink is intended for drill stands and screwdrivers.

Boorbitset voor beton, metselwerk en steen, geleverd als 5-delige set met vijf boorbitdiameters en een praktische kunststof koffer.

Bosch boorbitset met 5 stuks bevat bits van 4 mm, 5 mm, 6 mm, 8 mm en 10 mm, waarmee je een eenvoudige selectie hebt voor boren in harde materialen en de set overzichtelijk blijft in de meegeleverde kunststof koffer.

Boorset voor metselwerk, 7 stuks

Bosch 2 608 900 653 slijp-& schuurbenodigdheid voor rotatiegereedschap Tile, Steen Doorslijpschijf