Bosch Boren en bits - pagina 8

Boor, voor hout, zachthout, hardhout, slangenboor, 6 mm, zeskantig, lengte: 235 mm

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 10 pieces.

Boorstift, voor graniet, gehard beton, gneis, gehard verstevigd beton, hamerboor, 20 mm, SDS-plus, lengte: 600 mm

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill bit is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill bit's efficient U-shape with 2 flutes ensures effective dust removal, less friction, reduced heat development and wear, and extends the life of the drill bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill bit is PGM-certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill bit is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Robust Line Concrete Drill Bit Set CYL-3 with 5 pieces

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the shape of the tip with PointTeQ. It is quick and easy to start drilling, as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm since they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (notched angle) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in drill stands and screwdrivers.
Package of 10 pieces.

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering tip of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the borehead has a 135-degree tip and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers.
Package with 10 pieces.

Boor, voor hout, metaal, centreerboor, 7.15 mm, zeskantig, lengte: 85 mm

Hardmetalen gatenzaag met 73 mm diameter voor boren in steen- en metselwerkmaterialen, waaronder tegels, keramiek, dakpannen, marmer en vloertegels.

Hardmetalen gatenzaag is gespecificeerd voor gebruik op steenoppervlakken zoals metselwerk, klinker, vuursteen en keramische tegels, met een snijdiameter van 73 mm voor consistente gatmaat.

Gatenzaag, voor steel sheets, stainless steel sheets, 35 mm

Boorstift, voor beton, plastic, staal, zachthout, soft tile, multimaterial, 12 mm, lengte: 150 mm

Boorstift, voor beton, metselwerk, versterkt beton, 20 mm, SDS-max, lengte: 320 mm

Boorstift, hamerboor, 10 mm, SDS-plus, lengte: 165 mm

Routerbit, voor hout, V-groef, 11 mm, lengte: 45 mm

The CYL-3 drill head ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, and extends the life of the bit. The drill head provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling, and efficient fastening. The drill head is compatible with the cylindrical shaft system for all powered and battery-powered hammer drills.
Concrete Drill Set CYL-3 with 5 pieces

Boorbitset levert 25 HSS-TiN metaalboren volgens DIN 338 met een cilindrische schacht, met diameters van 1.0 tot 13.0 mm.

Bosch HSS-TiN, DIN 338 is ontworpen voor het boren in metaal, inclusief ferrometalen en plaatmetaal, en bevat meerdere boorlengtes (34–151 mm) om aan verschillende boortaken te voldoen.

Router bit set, 15 stuks, 8 mm

Gatenzaag, voor plastic, bakstenen, soft tile, stainless steel sheets, wood with metal, 60 mm

Gatenzaag, voor plastic, bakstenen, soft tile, stainless steel sheets, wood with metal, 80 mm

Boorset, voor hout, metaal, steen, 15 stuks, 5 mm, 6 mm, 8 mm, 4 mm en 3 mm

Boorstift, voor graniet, gehard beton, gneis, gehard verstevigd beton, hamerboor, 22 mm, SDS-plus, lengte: 1000 mm

Boorstift, voor beton, plastic, staal, zachthout, soft tile, 6.5 mm, zeskant, lengte: 100 mm

The set of Pick and Click screwdriver bits with Impact Control in 36 pieces also includes sockets as well as Impact Control Universal Holder Standard Magnetic and Impact Control Universal Holder Quick Release. These holders provide an extra good grip on the bit when mounting screws with power tools, while the Quick Release function allows for quick and easy changes. The screwdriver bit is part of the Bosch Pick and Click system, which enables customized accessory sets. The click-fitting system makes it easy to change bits and drills, thus obtaining an individually tailored set. The bit comes in a plastic holder that can easily be clicked into empty Pick and Click boxes (size M and L) for customized bit sets. Package of 8 pieces (index)

Boorstift, voor spaanplaat, zachthout, spaanplaat, speedboor, 20 mm, zeskant, lengte: 152 mm

Schroevendraaier, boor en dopsleutelset, voor hout, metaal, metselwerk, 50 stuks, torx, phillips, pozidriv , sleufkop , 7 mm , 8 mm , 10 mm