Bosch Boren en bits - pagina 7

Set met schroevendraaier, boor en bithouder, 91 stuks

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Package contains one piece.

Boorstiftset, spiraalboor, 5 stuks, 10.5 mm, H8, lengte: 133 mm

Boorstift, hamerboor, 8 mm, SDS-plus, lengte: 365 mm

Boorset, voor beton, metselwerk, spiraalboor, 7 stuks, 5 mm, 6 mm, 8 mm, 10 mm, 4 mm en12mm. Lengte:75mm ,85mm ,100mm ,120mm en150mm

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 10 pieces.

Boorstift, voor spaanplaat, zachthout, spaanplaat, speedboor, 26 mm, zeskant, lengte: 152 mm

Boorstift, hamerboor, 10 mm, SDS-plus, lengte: 215 mm

Boorstift, voor beton, metselwerk, versterkt beton, graniet, gneis, hamerboor, 20 mm, SDS-plus, lengte: 450 mm

The drill bit has a hexagonal shaft system and is compatible with all screwdrivers with a 13 mm chuck. The spiral drill bit is suitable for quick and precise drilling when drilling through holes, pre-drilling for rafter nails, and drilling deep dowel holes in wood. The powerful self-feeding tip pulls the bit all the way through, ensuring fast and precise drilling with low power consumption. The optimized low-friction geometry of the bit with solid core ensures straight holes, high chip removal, and higher working speed. The optimized guide edge of the bit and precision-ground head cutting edge produce precise holes. Suitable for use in construction trades, by carpenters and roofers, it is suitable for both softwood and hardwood
Total length 450 mm

Schroevendraaier, boor en dopsleutelset, voor hout, metaal, metselwerk, 100 stuks, torx, phillips, pozidriv, hexagonaal (zeskant), sleufkop (platte kop), 5 mm , 6 mm , 7 mm , 8 mm , 9 mm ,10mm ,11mm en13mm lang:25mm

Boorstift, hamerboor, 6.5 mm, SDS-plus, lengte: 215 mm

Bit set

Beton boor

It is suitable for use with handheld, table-mounted portable milling machines and CNC. The Wood Straight-bore head standard ensures optimal cutting for common milling tasks. Durability and reliable cutting results are achieved thanks to high-quality tungsten carbide cutters. In addition, the bore head prevents kickback by limiting the thickness of the generated chips. It is intended for milling grooves, joints, notches and feather joints in soft and hard solid wood as well as composite wood

Boorstift, hamerboor, 15 mm, SDS-plus, lengte: 465 mm

Boorbitset met 5 metselboren in de maten 4.0x75, 5.0x85, 6.0x100, 8.0x120 en 10.0x120 mm.

5-delige metselboorbitset is bedoeld voor het boren in steen- en metselwerkmaterialen, waaronder kalkzandsteen, kunststeen, natuursteen en beton (inclusief gewapend beton).

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, extending the life of the bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.

Boorstift, hamerboor, 8 mm, SDS-plus, lengte: 465 mm

Boorstift, voor zachthout, hardhout, spiraalboor, 16 mm, cilindrisch, lengte: 250 mm

Boorstift, voor beton, versterkt beton, hamerboor, 28 mm, SDS-max, lengte: 520 mm

Bosch 2 608 597 198 boor

Boorstift, voor beton, versterkt beton, graniet, gehard beton, gneis, hamerboor, 8 mm, SDS-plus, lengte: 165 mm (pak van 10)

Doosboor, voor beton, metselwerk, kalksteen, 50 mm, SDS-max

Gatenzaag, voor bakstenen, spaanplaat, zachthout, plastic verstevigd met glasvezel, soft tile, 73 mm