Bosch Boren en bits - pagina 6

Boorstift, voor beton, plastic, staal, zachthout, soft tile, multimaterial, 4 mm, cilindrisch, lengte: 75 mm

Boorset, voor beton, metselwerk, kalksteen, steen, kunststeen, 7 stuks: 5 mm, 6 mm, 7 mm, 8 mm ,10mm en 4mm. Lengte:75mm ,85mm ,100mm en120mm

Core cutter, for concrete, masonry, SDS-plus, length: 175 mm

Boorstift, voor versterkt beton, graniet, gehard beton, gneis, armed concrete, hamerboor, 6 mm, SDS-plus, lengte: 315 mm

Boorstiftset, voor beton, plastic, staal, zachthout, soft tile, multimaterial, 7 stuks, 5 mm, 6 mm, 7 mm, 8 mm, 10 mm, 5.5 mm, cilindrisch, lengte: 85 mm, 100 mm, 150 mm

Boorstift, voor graniet, gehard beton, gneis, gehard verstevigd beton, hamerboor, 16 mm, SDS-plus, lengte: 465 mm

Boorstift, hamerboor, 11 mm, SDS-plus, lengte: 165 mm

Boorstift, hamerboor, 8 mm, SDS-plus, lengte: 465 mm

Gatenzaag, voor plastic, bakstenen, soft tile, stainless steel sheets, wood with metal, 51 mm

Boorstift, voor beton, versterkt beton, graniet, gehard beton, gneis, hamerboor, 8 mm, SDS-plus, lengte: 215 mm (pak van 10)

Boorstift, voor beton, versterkt beton, graniet, gehard beton, gneis, hamerboor, 4 mm, SDS-plus, lengte: 165 mm

Boorstift, voor beton, metselwerk, versterkt beton, 20 mm, SDS-max, lengte: 720 mm

Boor- en beitelset, voor beton, metselwerk, hamerboor, 11-delig, 5 mm, 6 mm, 8 mm, 10 mm, 12 mm, SDS-plus, lengte: 160 mm, 110 mm, 250 mm

Routerbit, voor zacht massief hout, hard massief hout, houtcomposieten, recht, 15 mm, lengte: 51 mm

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, and extends the life of the bit. The drill head provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling, and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.

Boor, voor hout, slangenboor, 16 mm, zeskantig, lengte: 235 mm

Drill bit, for concrete, masonry, 14 mm, SDS-plus, length: 1005 mm

Drill bit, for plastic, non-ferrous metal, cast iron, cast steel, alloyed steel, non-alloyed steel, twist bit, 19 mm, cylindrical

This drill head is compatible with a 1/4 inch hexagonal shaft system for versatile use with screwdrivers, impact wrenches, and drill stands. The Impact Control HSS spiral bit provides extremely robust drilling in metal, especially with screwdrivers. The extremely strong core is extremely robust. The spiral hammer bit is precision ground from solid metal and has an oxidized notch that gives it outstanding surface quality for cutting through materials with reduced wear. It is suitable for use on alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, sheet metal and plastic.
Package of 1 piece.

Drill bit, for concrete, masonry, hammer bit, 24 mm, SDS-plus, length: 250 mm

Schroefbitset voor interne Torx (T) schroeven, met 5 standaard bits in de maten T10, T15, T20, T25 en T30 met 25 mm lengte en 1/4" externe zeskantschacht (ISO 1173 C6.3).

Bosch 5-delige schroevendraaierbitset standaard voor interne Torx schroeven (T) biedt een compacte selectie van veelvoorkomende Torx-maten voor compatibele 1/4" zeskant bithouders, waardoor je eenvoudig de juiste bit bij de schroefkop vindt.

• Inbegrepen bits: T10, T15, T20, T25, T30
• Lengte: 25 mm
• Schachttype: 1/4" externe zeskant, ISO 1173 C6.3

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 10 pieces.

The drill bit for installation work is extremely robust for formwork. The drill bit and shaft end are screwed together, which reduces the risk of breakage and ensures smooth operation. The tool's tapered notch, offset drill head, and shaft end prevent jamming even in damp wood while having enough power to cut through hidden nails. The extra-long shaft makes the drill bit versatile for drilling into multi-layered building materials or sandwich materials, such as within the construction industry (formwork) and for indoor installation work, plumbing work, and electrical installations. The installation drill bit is suitable for formwork, plates, planks, beams, plasterboard sheets lightweight building materials insulation and metal such as metal sheets sandwich materials with steel aluminum or profiled sheets. The installation drill bit is made of HSS (high-speed steel) according to DIN 7490 with a 118-degree angled cutting edge at the top. The cylindrical shaft of the drilling head is compatible with all drills with a 13 mm chuck.
Total length: 400 mm

Hamerboor SDS plus met 12 mm diameter, 400 mm werklengte en 460 mm totale lengte voor boren in steen, metselwerk, graniet, beton en gewapend beton.

Hamerboor SDS plus is gespecificeerd voor SDS plus-hamerboren en vermeld voor gebruik in gangbare harde bouwmaterialen, met duidelijke maatvoering voor nauwkeurige boorkeuze.

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the borehead has a 135-degree point and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers.
Package with two pieces.