Bosch Boren en bits

Bosch HAMMERBOR SDS-P P3 8X400/460MM

The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders.
Package of 1 piece.

9,33 € (7,71 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HAMMERBOR SDS-P P3 4X50/110MM

The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders for rotary hammers.
Package contains 1 piece.

5,77 € (4,77 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HAMMERBOR SDS-P P3 8X150/210MM

6,69 € (5,53 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch DIAMANTBOR VÅD 37X400MM 1/2T BEST C

158,43 € (130,93 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch EXPERT SHEET METAL HOLE SAWS FOR ROTARY DRILLS/DRIVERS & IMPACT DRILL/DRIVERS 17MM

Long Life Cutting Holes in Stainless Steel
Exceptional durability is built in with Bosch Carbide Technology.
Individually ground teeth made from fine, hard Carbide.
With integrated thread.

34,00 € (28,10 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BOR M/FORSÆNKER 4X15MM

Boor, voor hout, centreerpuntboor, 4 mm, lengte: 70 mm

17,86 € (14,76 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBORSÆT HSS-CO 19 STK

Boorset, 19 stuks

46,98 € (38,83 €)

Extern magazijn, 5 - 6 werkdagen levertijd

Bosch DIAMANTBOR TØR 127X150MM 1/2PROF

97,34 € (80,45 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch FREESPROFIEL D MET SNIJDER HM 8 mm Ø 15 mm

Routerbit, voor hout, Romeinse Ogee, 42.9 mm, lengte: 60 mm, breedte: 15.1 mm

33,90 € (28,02 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BOREPATRON SELVSP 1.5-13MM GSB 13-/16RE

The self-tightening drill chuck is intended for Bosch hammer drills. The self-tightening drill chuck is a Bosch system drill chuck with a clamping capacity of Ø 1.5 to 13 mm. It easily tightens the drill and does not require a key. The self-tightening drill chuck is intended for Bosch hammer drills. Self-tightening drill chuck, chrome-plated

42,82 € (35,39 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch DIAMANTHULSAV 57MM DRYSPEED

It is suitable for use with angle grinders. The Dry Speed diamond blade provides long life when dry drilling in hard ceramic materials. Its premium diamonds provide very high drilling speeds, and its vacuum brazing technology ensures a long lifespan. This product is intended for tiles, from soft wall tiles to very hard floor tiles, such as stoneware

107,67 € (88,98 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch DIAMANTHULSAV 70MM DRYSPEED

151,25 € (125,00 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch TRÆSNEGLEBOR 6 STK L235MM Ø10-20MM

Boorset, voor zacht hout, hardhout, slangenboor, 6 stuks, 10 mm, 12 mm, 14 mm, 20 mm ,18mm ,16mm ,zeskantig (hex), lengte: 235mm

69,97 € (57,83 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HAMMERBOR SDS P-5 10X310MM

Boor, voor beton, metselwerk, hamerboor, 10 mm, SDS-plus, lengte: 315 mm

9,33 € (7,71 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch Carbide hamerboor

Boor, voor beton, metselwerk, gewapend beton, 10 mm, SDS-plus, lengte: 615 mm

20,90 € (17,27 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch EXPERT SHEET METAL HOLE SAW FOR DRILLS/DRIVERS & IMPACT DRILLS/DRIVERS

Long life when hole cutting stainless steelExceptional durability is a given with Bosch Carbide Technology.Individually ground teeth made of fine carbide.With integrated thread.

78,38 € (64,78 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch EXPERT SHEET METAL HOLESAW FOR DRILLS/DRIVERS & IMPACT DRILLS/DRIVERS

Long life when hole cutting stainless steel
Exceptional durability is a given with Bosch Carbide Technology.
Individually ground teeth made of fine carbide.
With integrated thread.

60,43 € (49,94 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch EXPERT SHEET METAL HOLE SAWS FOR ROTARY DRILLS/DRIVERS & IMPACT DRILL/DRIVERS 21MM

Long Life Cutting Holes in Stainless Steel
Exceptional durability is built in with Bosch Carbide Technology.
Individually ground teeth made from fine, hard Carbide.
With integrated thread.

45,51 € (37,61 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR POINTTEC HSS-R 11.7MM 5STK

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 5 pieces.

23,26 € (19,22 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HAMMERBOR SDS P-5 12X460MM

Boor, voor beton, metselwerk, 12 mm, SDS-plus, lengte: 465 mm

16,60 € (13,72 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BETONBORSÆT 5-10MM 5 STK

Betonboorset levert vijf Bosch-boren voor het boren in beton, gewapend beton, metselwerk, steen en natuursteen, met maten 5.0x85, 6.0x100, 6.0x100, 8.0x120 en 10.0x120.

Bosch 5-delige Betonboorset is een praktische selectie van gangbare diameters en lengtes voor uiteenlopende harde bouwmaterialen, zodat je voor verschillende boorklussen de juiste maat bij de hand hebt.

9,14 € (7,55 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch EXPERT SHEET METAL HOLESAW FOR DRILLS/DRIVERS & IMPACT DRILLS/DRIVERS

Long life when hole cutting stainless steel
Exceptional durability is a given with Bosch Carbide Technology.
Individually ground teeth made of fine carbide.
With integrated thread.

60,43 € (49,94 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch EXPERT SHEET METAL HOLESAW FOR DRILLS/DRIVERS & IMPACT DRILLS/DRIVERS

Long life when hole cutting stainless steel
Exceptional durability is a given with Bosch Carbide Technology.
Individually ground teeth made of fine carbide.
With integrated thread.

64,96 € (53,69 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BIT T30 L:25 MM 3 STK

Schroevendraaier bit, 3 stuks, torx, T30, hexagonaal, lengte: 25 m

5,90 € (4,88 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BITS IMPACT PH2 65MM 8DEL

The double-ended screwdriver bit is very robust and suitable for demanding tasks, and can even withstand the high impact of wrenches. The bit has an extended torsion zone, which makes it extremely durable for long-term work. Modified S2 steel and an optimized heat treatment process provide extra durability for high performance in plant installations or heavy industrial work. The set of Pick and Click screwdriver bits with Impact Control in 36 pieces also includes top keys as well as Impact Control Universal Holder Standard Magnetic and Impact Control Universal Holder Quick Release. These holders provide extra grip on the bit when mounting screws with power tools, while the Quick Release function allows for quick and easy changes. The bit is part of the Bosch Pick and Click system, which allows for customized accessory sets. The click-fitting system makes it easy to change bits and drills to get a custom set tailored to your needs. It has an external hexagonal shaft of 1/4 inch for use with screwdrivers, especially wrenches.
Package of 8 (index)
8 double-ended screwdriver bits

16,77 € (13,86 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Maandag - Donderdag:	09:00 - 12:00
Vrijdag:	Gesloten
Weekend en Deense feestdagen:	Gesloten

Telefoon:	085 301 55 55
Email particulier:	[email protected]
Email zakelijk:	[email protected]

Bosch Boren en bits - pagina 36

Bosch HAMMERBOR SDS-P P3 8X400/460MM

Bosch HAMMERBOR SDS-P P3 4X50/110MM

Bosch HAMMERBOR SDS-P P3 8X150/210MM

Bosch DIAMANTBOR VÅD 37X400MM 1/2T BEST C

Bosch EXPERT SHEET METAL HOLE SAWS FOR ROTARY DRILLS/DRIVERS & IMPACT DRILL/DRIVERS 17MM

Bosch BOR M/FORSÆNKER 4X15MM

Bosch METALBORSÆT HSS-CO 19 STK

Bosch DIAMANTBOR TØR 127X150MM 1/2PROF

Bosch FREESPROFIEL D MET SNIJDER HM 8 mm Ø 15 mm

Bosch BOREPATRON SELVSP 1.5-13MM GSB 13-/16RE

Bosch DIAMANTHULSAV 57MM DRYSPEED

Bosch DIAMANTHULSAV 70MM DRYSPEED

Bosch TRÆSNEGLEBOR 6 STK L235MM Ø10-20MM

Bosch HAMMERBOR SDS P-5 10X310MM

Bosch Carbide hamerboor

Bosch EXPERT SHEET METAL HOLE SAW FOR DRILLS/DRIVERS & IMPACT DRILLS/DRIVERS

Bosch EXPERT SHEET METAL HOLESAW FOR DRILLS/DRIVERS & IMPACT DRILLS/DRIVERS

Bosch EXPERT SHEET METAL HOLE SAWS FOR ROTARY DRILLS/DRIVERS & IMPACT DRILL/DRIVERS 21MM

Bosch METALBOR POINTTEC HSS-R 11.7MM 5STK

Bosch HAMMERBOR SDS P-5 12X460MM

Bosch BETONBORSÆT 5-10MM 5 STK

Bosch EXPERT SHEET METAL HOLESAW FOR DRILLS/DRIVERS & IMPACT DRILLS/DRIVERS

Bosch EXPERT SHEET METAL HOLESAW FOR DRILLS/DRIVERS & IMPACT DRILLS/DRIVERS

Bosch BIT T30 L:25 MM 3 STK

Bosch BITS IMPACT PH2 65MM 8DEL