Bosch Boren en bits - pagina 38

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral bore head is manufactured according to DIN 338. The bore head is of type N (not angle) with a 135-degree point and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the bore head) and is intended for use in drilling stands and screwdrivers.
Package with one piece.

Routerbit, voor zachthout, hardhout, afronding, 36.7 mm, lengte: 70 mm

Drill bit, for concrete, masonry, hammer bit, 20 mm, SDS-plus, length: 300 mm

Drill bit, for concrete, masonry, hammer bit, 22 mm, SDS-plus, length: 250 mm

Suitable for use with diamond drilling tools. The Universal Diamond Core Bit standard for dry drilling ensures efficient drilling in masonry. The core bit segments are laser welded to ensure good durability and enable dry drilling in masonry for junction boxes, electrical outlets, sanitary piping, etc. The dry drill core bit is designed for building materials such as limestone, brick and masonry.
Diamond Dry Drill Crown Set G 1/2" with 5 pieces
including:
1 x ejector
1 x adapter hexagon - G 1/2"
1 x adapter SDS plus - G 1/2"
1 x extension hexagon - G 1/2" (240 mm)
1 x extension SDS plus - G 1/2" (240 mm)
1 x centering drill bit 200 mm

The SDS max-7 drill bit is perfect for use at the fastest drilling speeds. The solid S-carbide cutter and angled side cutters provide very fast drilling. The drill head's vibration-optimized notch design provides optimal power transmission and increased speed. The product is suitable for use in concrete and reinforced concrete, limestone, and masonry. The visible wear indicator shows whether the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. It is compatible with SDS max holders on rotary hammers.
Package of 1 piece.

Boorhamerboor SDS plus met 6.5 mm diameter, 100 mm werklengte en 160 mm totale lengte voor boren in steen, metselwerk, graniet, beton en gewapend beton.

Hammer drill bit SDS plus is gespecificeerd voor harde minerale materialen en biedt duidelijke kernmaten om de juiste boor te kiezen voor je boorklus.

Houtspiraalboor met zeskantschacht, 24.0 mm diameter en 170 mm werklengte voor het boren in hout, inclusief zachthout en akoestische panelen.

Bosch Houtspiraalboor, zeskantschacht combineert een schachtdiameter van 11 mm met een totale lengte van 235 mm om diepe, schone gaten te boren in geschikte houtmaterialen.

The impact control screwdriver bit is very robust and can withstand even the high power of impact screwdrivers

25 mm schroevendraaierbit, 2xPZ2

Boorstift, voor beton, metselwerk, versterkt beton, 14 mm, SDS-max, lengte: 340 mm

Bosch HSS Twist Drill Bits PointTeQ

Bosch HSS spiraalboren geslepen

It has a 1/4 in. External hex shank for use with drill drivers, screwdrivers and especially impact screwdrivers. The very robust Impact Control screwdriver bit is even suitable for the high torque of impact screwdrivers. The special torsion zone gives the bit an extremely high durability for continuous use, the S2-modified steel and the optimized heat treatment process enable maximum performance under the harshest conditions. This product is perfectly suitable for heavy tasks such as extensive assembly or heavy industrial work.

Accessoireset bevat 173 stuks voor montagetaken in de Bosch X-Line 50Ti serie.

Bosch X-Line 50Ti accessory set, 173 pieces, mounting set is een Bosch montageset die is ontworpen om een brede selectie accessoires gebundeld in één set te houden voor veelzijdig dagelijks gebruik.

Display

Hogesnelheidsfrees, voor zachthout, hardhout, speedboor, plat, 40 mm, zeskant, lengte: 152 mm

Boor, voor plastic, spaanplaat, massief hout, Corian, medium-density fibreboard (MDF), 20 mm, recht, lengte: 56 mm

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill bit is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill bit's efficient U-shape with 2 flutes ensures effective dust removal, less friction, reduced heat development and wear, and extends the life of the drill bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill bit is PGM-certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling, and efficient fastening. The drill bit is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package with 1 piece.

Boor, spiraalboor, 4 mm, cilindrisch, lengte: 75 mm (pak van 2)

The CYL-5 drill bit head guarantees extra long lifespan when drilling in concrete and stone. The carbide material developed by Bosch, combined with diamond-ground cutting edges, provides an extremely durable drill bit head. The variable design with 2 flutes and a short, variable pitch significantly reduces flute friction and ensures effective dust removal and less wear. The Bosch Power Grip shank system enables 100% power transfer from the machine to the drill bit head. This means that the power is optimally utilized directly for the drilling task, and reduced power loss means less wear. For drilling fixing holes in concrete, natural stone, and artificial stone materials. The drill bit head is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, accurate boreholes, and efficient fastening. The drill bit head is compatible with cylindrical shank systems for all powered or battery-powered hammer drills.
Package of 1 piece.

Boor, voor beton, metselwerk, steen, 5 mm, cilindrisch, lengte: 85 mm

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, extending the life of the bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.