Bosch Boren en bits - pagina 31

The drill bit has a hexagonal shaft system and is compatible with all screwdrivers with a 13 mm chuck. The spiral drill bit is suitable for quick and precise drilling when drilling through holes, pre-drilling for rafter nails, and drilling deep dowel holes in wood. The powerful self-feeding tip pulls the bit all the way through, ensuring fast and precise drilling with low power consumption. The optimized low-friction geometry of the bit with solid core ensures straight holes, high chip removal, and higher working speed. The optimized guide edge of the bit and precision-ground head cutting edge produce precise holes. Suitable for use in construction trades, by carpenters and roofers, it is suitable for both softwood and hardwood
Total length 600 mm

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 10 pieces.

The drill bit has a hexagonal shaft system and is compatible with all screwdrivers with a 13 mm chuck. The spiral drill bit is suitable for quick and precise drilling when drilling through holes, pre-drilling for rafter nails, and drilling deep dowel holes in wood. The powerful self-feeding tip pulls the bit all the way through, ensuring fast and precise drilling with low power consumption. The optimized low-friction geometry of the bit with solid core ensures straight holes, high chip removal, and higher working speed. The optimized guide edge of the bit and precision-ground head cutting edge produce precise holes. Suitable for use in construction trades, by carpenters and roofers, it is suitable for both softwood and hardwood
Total length 160 mm

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 10 pieces.

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 5 pieces.

Drill bit set, for metal, twist bit, 5 pieces, 5 mm, 6 mm, 4 mm, 3 mm, 2 mm, hex, length: 60 mm, 72 mm, 83 mm, 98 mm, 91 mm

This drill bit is compatible with a 1/4 inch hexagonal shaft system for versatile use with screwdrivers, impact wrenches and drilling rigs. The Impact Control HSS spiral drill bit provides extremely robust drilling in metal, especially with screwdrivers. The extremely strong core is extremely robust. The spiral hammer drill bit is precision ground from solid metal and has an oxidized notch that gives it outstanding surface quality for cutting through materials with reduced wear. It is suitable for use on alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, sheet metal and plastic.
Package of 1 piece.

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The bit's tapered torsion zone easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks. Screwdriver bit set extra hard (Torx®) with 3 pieces

Bosch 2609256905 1 pc(s)

Bitset met 3 dubbelbladige bits voor Pozidriv-kruiskopschroeven en sleufschroeven (PH, S), 60 mm lengte, met 1/4" uitwendige zeskantschacht.

3-delige dubbelbladige bitset voor Pozidriv-kruiskopschroeven en sleufschroeven (PH, S) bevat S0.6x4.5-PZ1, S0.8x5.5-PZ2 en S1.2x6.5-PZ3 bits, ontworpen voor gebruik met 1/4" uitwendige zeskant-houders.

Schroefbit met T-schroefkop, maat 25, en 25 mm lengte voor compatibele schroefwerkzaamheden.

Standaard T schroefbit is gespecificeerd met een T (Torx) schroefkop, schroefkopmaat 25 en 25 mm lengte, waardoor het eenvoudig is de bit af te stemmen op de vereiste schroefkop en toepassing.

Bosch 2 609 255 213 boor 1 stuk(s)

Verzinkboor in gereedschapsstaal met 10.0 mm diameter, M5-verzinkspecificatie en 50 mm totale lengte, geschikt voor metalen, kunststoffen en hout.

Bosch verzinkboor, gereedschapsstaal is ontworpen voor schoon verzinken in materialen zoals non-ferrometalen, kunststoffen inclusief Styrofoam, zachthout en hardhout, en ferrometalen inclusief betonstaal.

Boorhamerboor SDS plus met 15 mm diameter, 100 mm werklengte en 160 mm totale lengte, geschikt voor boren in steen, metselwerk, graniet, beton en gewapend beton.

Boorhamerboor SDS plus biedt een betrouwbare passing voor SDS plus-boorhamers en is gespecificeerd voor gangbare minerale bouwmaterialen, met duidelijke maatgegevens voor nauwkeurige afstemming van gereedschap en boorgat.

• Diameter: 15 mm
• Werklengte: 100 mm
• Totale lengte: 160 mm
• Materialen: steen, metselwerk, graniet, beton, gewapend beton

Boor, voor metaal, spiraalboor, 10 stuks, 9.5 mm, lengte: 125 mm

Metaalborenset met HSS-G-ontwerp volgens DIN 338, 3 mm diameter en geschikt voor gietijzer, metaal, kunststof en roestvrij staal.

Bosch Metaalboor HSS-G, DIN 338 is ontworpen voor normaal gebruik met een boormachine en bevat 2 boren met een werklengte van 3.3 cm.

Socket spanner set in SW7, SW8, SW10 and SW13 diameter with an 1/4" hex shank

The Impact Control screwdriver bit is very robust and suitable for demanding tasks, and can even withstand the high power of impact wrenches. The bit has an extended torsion zone, which makes it extremely durable for long-term work. Modified S2 steel and an optimized heat treatment process provide extra durability for high performance in construction installations or heavy industrial work. The HEX-9 MultiConstruction hammer drill bit is suitable for virtually all types of materials in indoor work. It has diamond-ground cutting edges with high wear resistance and a U-shape with 2 notches that provide good dust removal and standard life span. In addition, its carbide tip provides easy starting and good control during drilling. The Impact Control Universal Holder Quick Release makes it easy to change bits and holds the bit extra securely during universal use of screwdrivers. A permanent magnet ensures a firm and secure grip on the used bits, while its Quick Release function on the chuck allows quick and easy changes while also providing a firm grip on the bit. It is suitable for all fastening tasks that require power tools.All bits have an external hexagonal shaft of 1/4 inch (6mm)and are suitable for use with drills, screwdrivers,and especially impact wrenches.Bits are part of Bosch's Pick-and-Click system which enables customized accessory sets.The click-fitting system makes it easy to change bits & drills thus getting individualized set.The Bit comes in a plastic holder that clicks into Pick-and-Click boxes without content (size M & L)for various customized Bit sets.
Package includes Pick-and-Click MultiConstruction drill bits & Screwdriver Bits

Boorhamerboor SDS plus met 6.5 mm diameter, 100 mm werklengte en 160 mm totale lengte voor boren in steen, metselwerk, graniet, beton en gewapend beton.

Hammer drill bit SDS plus is gespecificeerd voor harde minerale materialen en biedt duidelijke kernmaten om de juiste boor te kiezen voor je boorklus.

Boorset, spiraalboor, 7 stuks

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Package contains one piece.

Schroevendraaier bit, 3 stuks, 1/4", phillips, PH2, hexagonaal, lengte: 25 mm

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, extending the life of the bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.