Bosch Boren en bits

Bosch HAMMERBOR PLUS 7X 16X1000MM

Boorstift, voor beton, metselwerk, versterkt beton, graniet, gneis, hamerboor, 16 mm, SDS-plus, lengte: 1000 mm

91,69 € (75,78 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BEST FOR CONCRETE DIAMOND WET CORE CUTTER G 1/2-INCH FOR DIAMOND DRILLS

Bosch Best for Concrete diamantboorkronen voor nat gebruik G 1/2-inch

92,04 € (76,07 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch FRÆSER NOT 2 SKÆR HM 8 mm L 20 mm B 12

Routerbit, Recht, 12 mm, lengte: 51 mm

15,75 € (13,02 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch TRINBOR M10-M40 HSS-ALTIN

The drill head for step drilling is made of HSS (high-speed steel) and coated with AlTiN (aluminum titanium nitride). This provides the longest possible lifespan and does not require the use of coolant. Laser-marked numbers on both flutes provide highly visible and durable marking of the hole diameter. Additionally, the 3-flat shank prevents slipping in the drill chuck and provides efficient transmission with high torque. The HSS step drill head delivers smooth, burr-free drilling in multiple diameters with a single tool. It is ideal for deburring, drilling round holes, and enlarging existing ones. Center punch marks are not necessary because the split point design allows for easy starting. Its CNC-ground flute enables optimized chip removal and less vibration for smoother drilling. The most optimal cutting edge geometry and absolute smoothness are ensured thanks to axial and radial relief grinding.This step drill head is suitable for use on thin materials such as non-ferrous metals, sheet plastic, sheet steel, plastic, and stainless steel.Threaded core holes for cable glands:Ø 6-8.5-10.5-14.5-18.-23.-30.-38.mm;M10x1 .5-M12x1 .5-M16x1 .5-M20x1 .5-M25x1 .5-M32x1 .5-M40 x 1 , 50Through-holes for cable glands:Ø6 -10 , 512 ,516 -20 ,525 -28 -32 ,535 -40 mm;M10 x 15 M12 x15 M16 x15 M20 x15 M25 xlS M32xlS MOxlS

175,10 € (144,71 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch SDS-max-7

Drill bit, for concrete, masonry, limestone, reinforced concrete, 30 mm, SDS-max, length: 320 mm

99,03 € (81,84 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HJÃ˜RNEBÃ˜RSTE TIL VERSA

Corner brush, voor metaal, plastic, tegel, graniet, weefsel, 10 stuks, 40 mm, lengte: 50 mm, breedte: 40 mm, voor Versa PC10-1/10

12,67 € (10,47 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch KAPSKIVE DSM510 METALL TIL DSM20

Doorslijpschijf, 3 stuks, 20 mm, lengte: 77 mm, breedte: 77 mm, voor Dremel DSM20-3/4

11,50 € (9,50 €)

Extern magazijn, 5 - 6 werkdagen levertijd

Bosch KAPSKIVE DSM520 STEN TIL DSM20

Doorslijpschijf, voor metselwerk, steen, bakstenen, gipsplaat, gipsplaat, 2 stuks, 20 mm, lengte: 77 mm, breedte: 77 mm, voor Dremel DSM20-3/4

10,42 € (8,61 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HAMMERBOR SDS-P P3 25X200/250MM

The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders for rotary hammers.
Package contains 1 piece.

18,28 € (15,11 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HAMMERBOR SDS-P P3 14X100/160MM

The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders for rotary hammers.
Package contains 1 piece.

8,66 € (7,16 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HAMMERBOR SDS-P P3 22X400/450MM

The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders for rotary hammers.
Package contains 1 piece.

24,82 € (20,51 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BETONBOR SILVER SLAGBOR 10X300MM

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill bit is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill bit's efficient U-shape with 2 flutes ensures effective dust removal, less friction, reduced heat development and wear, and extends the life of the drill bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill bit is PGM-certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling, and efficient fastening. The drill bit is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package with 1 piece.

8,91 € (7,36 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR HSS-G DIN 340 9X115MM

The long ground HSS spiral drill bit for drilling deep holes through metal with maximum precision. Its length allows for deep drilling with this long drill head. The exposed 135-degree two-part self-centering tip of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the two-part tip, it is also unnecessary to mark pilot holes in advance or pilot bore up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. The long ground HSS spiral drill bit is manufactured according to DIN 340. The drill head is of type N (not angle) with a 135-degree tip and a diameter tolerance of h8. This drill head is designed for drilling deep holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. It has a cylindrical shaft system (the shaft has the same diameter as the drill head) and is intended for use in drilling stands and screwdrivers
Package contains one piece.

12,08 € (9,98 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch FORSTNERBOR HM 15MM

This hinge cutter bit is equipped with a cylindrical shaft system and is intended for portable screwdrivers and drill stands. The carbide hinge cutter bit ensures precise results in abrasive materials. The bit's special properties make it the preferred tool of machine carpenters and carpenters, especially in the production of windows, doors, and kitchens. The bit, which is made with carbide cutters with diamond-ground tungsten achieves impressive results. In addition, the centering point guarantees a perfect start to drilling, and the two primary and two secondary side cutters effortlessly cut through materials to achieve extremely precise and splinter-free bottom hole diameters. The bit is particularly suitable for abrasive materials on hard wood, plywood, chipboard, and fiberboard.
Package with 1 piece.

19,63 € (16,22 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HAMMERBOR SDS-P P3 10X150/210MM

The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders.
Package of 1 piece.

7,21 € (5,96 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch FORSTNERBOR HM 34MM

This hinge cutter bit is equipped with a cylindrical shaft system and is intended for portable screwdrivers and drill stands. The carbide hinge cutter bit ensures precise results in abrasive materials. The bit's special properties make it the preferred tool of machine carpenters and carpenters, especially in the production of windows, doors, and kitchens. The bit, which is made with carbide cutters with diamond-ground tungsten achieves impressive results. In addition, the centering point guarantees a perfect start to drilling, and the two primary and two secondary side cutters effortlessly cut through materials to achieve extremely precise and splinter-free bottom hole diameters. The bit is particularly suitable for abrasive materials on hard wood, plywood, chipboard, and fiberboard.
Package with 1 piece.

39,65 € (32,77 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HAMMERBOR SDS-P P3 5X50/110MM

5,65 € (4,67 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR HSS-CO s 1X34MM 10 STK

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package of 10 pieces.

10,25 € (8,47 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR HSS-CO S 4.5X80MM 10STK

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package with 10 pieces.

18,03 € (14,90 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR HSS-G s 13.0X151MM 5STK

Boor, spiraalboor, 13 mm, cilindrisch, lengte: 151 mm (verpakking van 5)

42,02 € (34,73 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR HSS-G S 9.5X125MM

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering tip of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral bore head is manufactured according to DIN 338. The bore head is of type N (notch angle) with a 135-degree tip and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the bore head) and is intended for use in drilling stands and screwdrivers.
Package with one piece.

5,51 € (4,55 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR HSS-CO S 3.3X65MM 10STK

13,55 € (11,20 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR HSS-CO s 3X61MM 10STK

Boor, spiraalboor, 3 mm, cilindrisch, lengte: 61 mm (pak van 10)

12,37 € (10,22 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METAALBOOR HSS-G 9.2X125MM 5 STUKS

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the borehead has a 135-degree point and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers.
Package with five pieces.

20,39 € (16,85 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR HSS-CO s 5.5X93MM 10STK

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package of 10 pieces.

23,10 € (19,09 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Maandag - Donderdag:	09:00 - 12:00
Vrijdag:	Gesloten
Weekend en Deense feestdagen:	Gesloten

Telefoon:	085 301 55 55
Email particulier:	[email protected]
Email zakelijk:	[email protected]

Bosch Boren en bits - pagina 30

Bosch HAMMERBOR PLUS 7X 16X1000MM

Bosch BEST FOR CONCRETE DIAMOND WET CORE CUTTER G 1/2-INCH FOR DIAMOND DRILLS

Bosch FRÆSER NOT 2 SKÆR HM 8 mm L 20 mm B 12

Bosch TRINBOR M10-M40 HSS-ALTIN

Bosch SDS-max-7

Bosch HJÃ˜RNEBÃ˜RSTE TIL VERSA

Bosch KAPSKIVE DSM510 METALL TIL DSM20

Bosch KAPSKIVE DSM520 STEN TIL DSM20

Bosch HAMMERBOR SDS-P P3 25X200/250MM

Bosch HAMMERBOR SDS-P P3 14X100/160MM

Bosch HAMMERBOR SDS-P P3 22X400/450MM

Bosch BETONBOR SILVER SLAGBOR 10X300MM

Bosch METALBOR HSS-G DIN 340 9X115MM

Bosch FORSTNERBOR HM 15MM

Bosch HAMMERBOR SDS-P P3 10X150/210MM

Bosch FORSTNERBOR HM 34MM

Bosch HAMMERBOR SDS-P P3 5X50/110MM

Bosch METALBOR HSS-CO s 1X34MM 10 STK

Bosch METALBOR HSS-CO S 4.5X80MM 10STK

Bosch METALBOR HSS-G s 13.0X151MM 5STK

Bosch METALBOR HSS-G S 9.5X125MM

Bosch METALBOR HSS-CO S 3.3X65MM 10STK

Bosch METALBOR HSS-CO s 3X61MM 10STK

Bosch METAALBOOR HSS-G 9.2X125MM 5 STUKS

Bosch METALBOR HSS-CO s 5.5X93MM 10STK