Bosch Boren en bits

Bosch FORSKAL. & INSTALLATIONSBOR 6X400MM

The drill bit for installation work is extremely robust for formwork. The drill bit and shaft end are screwed together, which reduces the risk of breakage and ensures smooth operation. The tool's tapered notch, offset drill head, and shaft end prevent jamming even in damp wood while having enough power to cut through hidden nails. The extra-long shaft makes the drill bit versatile for drilling into multi-layered building materials or sandwich materials, such as within the construction industry (formwork) and for indoor installation work, plumbing work, and electrical installations. The installation drill bit is suitable for formwork, plates, planks, beams, plasterboard sheets lightweight building materials insulation and metal such as metal sheets sandwich materials with steel aluminum or profiled sheets. The installation drill bit is made of HSS (high-speed steel) according to DIN 7490 with a 118-degree angled cutting edge at the top. The cylindrical shaft of the drilling head is compatible with all drills with a 13 mm chuck.
Total length: 400 mm

12,80 € (10,58 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR HSS-G s 2.0x49MM 10STK

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the bit has a 135-degree point and a diameter tolerance of h8. It has a cylindrical shank system (the shank has the same diameter as the bit) and is intended for use in drilling stands and screwdrivers.
Package with 10 pieces.

6,96 € (5,75 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HAMMERBOR SDS P-5 14X460MM

Drill bit, for concrete, masonry, reinforced concrete, 14 mm, SDS-plus, length: 465 mm

17,44 € (14,41 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HAMMERBOR SDS P-5 18X200MM

Drill bit, for concrete, masonry, 18 mm, SDS-plus, length: 200 mm

18,53 € (15,31 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BITS PH2R XH 25MM 25 STUKS

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks.
Drive unit ISO 1173 C6.3, 1/4" external hexagon
with reduced diameter at the bit output, suitable for countersinking screws

19,38 € (16,02 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR HSS-G s 4.0X75MM 10 STK

Boor, spiraalboor, 10 stuks, 4 mm, cilindrisch, lengte: 75 mm

11,02 € (9,11 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HAMMERBOR SDS P-5 22X600MM

Boor, hamerboor, 22 mm, lengte: 600 mm

60,77 € (50,22 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HAMMERBOR SDS-MAX SPEED X 45X400/520MM

The SDS max-7 drill bit is perfect for use at the fastest drilling speeds. The solid S-carbide cutter and angled side cutters provide very fast drilling. The drill head's vibration-optimized notch design provides optimal power transmission and increased speed. The product is suitable for use in concrete and reinforced concrete, limestone, and masonry. The visible wear indicator shows whether the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. It is compatible with SDS max holders on rotary hammers.
Package of 1 piece.

225,93 € (186,72 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HAMMERBOR SDS-MAX SPEED X 32X1200/1320MM

Drill bit, for concrete, masonry, limestone, reinforced concrete, 32 mm, SDS-max, length: 1320 mm

278,55 € (230,21 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch SDS-max-9 Break Through

295,37 € (244,11 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch SDS-max-9 Break Through

SDS max-9 Break Through is a standard drill head for drilling large and deep holes in concrete. The carbide tip with three edges is vacuum-brazed and hardened to ensure fast results and efficient removal of large objects. The drill head's long tapered shaft allows for through-hole drilling, and the U-shape with 2 notches ensures effective dust removal. The drill head is designed for drilling through-holes with a diameter between 45 and 80 mm in concrete, masonry, and limestone, e.g., for securing outdoor cables and pipes. Note: Always use hammer drills with appropriate capacity for Break Through drill heads to avoid overload. See the instruction manual for the hammer drill. It is intended for use with hammer drills.
Package contains 1 piece.

343,95 € (284,26 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HAMMERBOR SDS-MAX SPEED X 40X600/720MM

Boor, voor beton, metselwerk, kalksteen, gewapend beton, 40 mm, SDS-max, lengte: 720 mm

219,68 € (181,55 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch 7-delige Mini-X-Line-stenen set

Boorset voor metselwerk, 7 stuks

8,87 € (7,33 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HAMMERBOR SDS-P P3 12X400/460MM

The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders for rotary hammers.
Package contains 1 piece.

10,16 € (8,40 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch Expert SelfCut Speed

Boorstift, voor spaanplaat, zachthout, spaanplaat, speedboor, 36 mm, zeskant, lengte: 152 mm

8,40 € (6,94 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BITS TX25 IMPACT 25MM TICTAC 25 STK

Display

14,65 € (12,11 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR HSS-G Ø11X94X142MM 118GR

Bosch 2 609 255 057 drill bit

6,11 € (5,05 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HAMMERBOR SDS P-5 22X1000MM

88,81 € (73,40 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BOREPATROON Ø1.5-13MM 1/2-20UNF

Snelspanboorkop met een 1.5–13.0 mm spanbereik, 1/2"–20 gereedschapshouder en ondersteuning voor rechts-/linksom draaien voor gebruik met stationaire boormachines, boormachines, klopboormachines en accuboormachines.

Bosch Boorkop tot 13 mm biedt een veelzijdige passing voor meerdere boortypes, met een stevige grip binnen het opgegeven spanbereik en ondersteuning voor zowel rechts- als linksom draaien.

19,70 € (16,28 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BITS T20 25MM 1/4 Standaard 2STK

Bosch 2609255934 screwdriver bit 1 pc(s)

4,49 € (3,71 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR HSS-CO s 11.5X142MM 5STK

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly, so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package of 5 pieces.

55,31 € (45,71 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HAMMERBOR SDS-P S3 12X200/260MM 10STK

The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders.
Package of 10 pieces.

54,66 € (45,17 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BETONBOR CYL5 6X100MM

Boor, voor beton, metselwerk, steen, 6 mm, cilindrisch, lengte: 100 mm

4,76 € (3,93 €)

Extern magazijn, 5 - 6 werkdagen levertijd

Bosch METALBOR HSS-G s 3x61MM 2STK

Boor, spiraalboor, 3 mm, cilindrisch, lengte: 61 mm (pak van 2)

4,90 € (4,05 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch DIAMANTBOR TØR 42X150MM 1/2 BEST

86,45 € (71,45 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Maandag - Donderdag:	09:00 - 12:00
Vrijdag:	Gesloten
Weekend en Deense feestdagen:	Gesloten

Telefoon:	085 301 55 55
Email particulier:	[email protected]
Email zakelijk:	[email protected]

Bosch Boren en bits - pagina 18

Bosch FORSKAL. & INSTALLATIONSBOR 6X400MM

Bosch METALBOR HSS-G s 2.0x49MM 10STK

Bosch HAMMERBOR SDS P-5 14X460MM

Bosch HAMMERBOR SDS P-5 18X200MM

Bosch BITS PH2R XH 25MM 25 STUKS

Bosch METALBOR HSS-G s 4.0X75MM 10 STK

Bosch HAMMERBOR SDS P-5 22X600MM

Bosch HAMMERBOR SDS-MAX SPEED X 45X400/520MM

Bosch HAMMERBOR SDS-MAX SPEED X 32X1200/1320MM

Bosch SDS-max-9 Break Through

Bosch SDS-max-9 Break Through

Bosch HAMMERBOR SDS-MAX SPEED X 40X600/720MM

Bosch 7-delige Mini-X-Line-stenen set

Bosch HAMMERBOR SDS-P P3 12X400/460MM

Bosch Expert SelfCut Speed

Bosch BITS TX25 IMPACT 25MM TICTAC 25 STK

Bosch METALBOR HSS-G Ø11X94X142MM 118GR

Bosch HAMMERBOR SDS P-5 22X1000MM

Bosch BOREPATROON Ø1.5-13MM 1/2-20UNF

Bosch BITS T20 25MM 1/4 Standaard 2STK

Bosch METALBOR HSS-CO s 11.5X142MM 5STK

Bosch HAMMERBOR SDS-P S3 12X200/260MM 10STK

Bosch BETONBOR CYL5 6X100MM

Bosch METALBOR HSS-G s 3x61MM 2STK

Bosch DIAMANTBOR TØR 42X150MM 1/2 BEST