Vloerverwarming - pagina 9

SALUS GVU is a complete floor heating shunt solution for underfloor heating with underfloor heating manifold, shunt and circulation pump built together in one unit.Our circulation pump is a 6m pump with capacity up to 16 zones. The underfloor heating manifold is a high flow manifold with manual balancing of each circuit. Each valve has a built-in manual flow control which is very easy to adjust. Instructions on how to balance the circuit can be found in the distributor box.The SALUS GVM floor heating manifold has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. The Inlet thermostat has a temperature setting of 20 to 55 degrees Celsius. Manifold pipe connection is 1 ", and connection to water for the heat supply is 3/4" socket, and threads to the actuator are 30 x 1.5 mm.

Uponor 1013426 sanitaire fitting Druk-eindstuk

Uponor 1065284 sanitaire fitting Druk-eindstuk

Adapters for actuators. For mounting actuators on valves Danfoss RAV/FJVR.

SALUS GVM-F underfloor heating manifold is a high flow manifold with manual balancing of each circuit.Each zone valve has on the flow pipe a flow meter that can be used for balancing. Alternatively, the built-in manual flow control integrated into the return valve on the return pipe can be used for balancing. Instructions on how to balance the circuit can be found in the distributor box.SALUS GVM-F underfloor heating distributor has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. Inlet and return pipe connection is 1 ”thread, and the actuator thread is 30 x 1.5 mmContains:Stainless steel manifold set with flow meterEuroconus set for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting brackets for wall mountingWith individual room temperature control. SALUS GVM-F benefits are available with SALUS - wireless control.Properties:Available with SALUS insulation in form-stable EPPComplies with the installation requirements for insulation standard DS 452.Ready for wall mounting.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.• Can be integrated into the SALUS Smart Home solution.Can be operated directly from the room thermostat or from the mobile phone, tablet or computer.Benefits are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension1 ”, for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum test pressure: 10 bar

Adapters voor actuators. Voor het monteren van actuators op Tesa, Frese, Honeywell, Cazzaniga en Wavin manifolds

Complete wireless control kit for controlling heating in small rooms max 8 m2. Consists of a 1-zone control unit, an analogue room thermostat, an actuator and 1/2 radiator valve, 230V.

Uponor fixatieklemmen railstrip met pinnen 17-20mm h.o.h.100mm 0,6m

Complete wireless control kit for controlling heating in small rooms max 8 m2. Consists of a 1-zone control unit, an analogue room thermostat and an actuator, 230V.

Used for floorheating systems

Pre-assembled linear manifold with incorporated lockshield valve. Micrometric regulation. Compression ends. Without fittings. Yellow. 3 outlets.

Klep voor k7037 - retour - compleet

Pre-assembled linear manifold with micrometric manoeuvre, with thermostatic option or electrical control, for return pipes. Compression ends. Without fittings. 2 outlets.

Roth Compact® Primer is a cement-based, fibre-reinforced, highly flexible primer that ensures good adhesion between Roth Compact® System products and subsequent products, such as any type of tile adhesive or self-levelling screeds. Roth Compact® Primer develops its strength quickly so that subsequent work can be carried out after just 3 hours.

Used for floorheating systems

Used between floorheating pipe and Roth manifold.

Used between floorheating pipe and Roth manifold.

Modules voor 1,3,4,6 lussen, combineerbaar tot max. 12 lussen, voor aansluiting op basiskit, aansluiting rechts of links met vlakke dichting of aansluiting van onderen met optionele elleboogset. Geleverd met lockshield-ventiel voor balanceren (met instelring) en afsluiten; instelring voor balanceren zonder gereedschap; plaatsen voor kamernaamlabels; retourleiding met ventielen en doppen; geschikt voor actuatoren No.1000138 (24V mannelijk) No. 1005605 (230V mannelijk); lusaansluiting Q&E 20,Q&E17 compleet met Q&E-ringen1025659 ,1042836 ;lusafstand50 mm kopafstand225 mm max.druk:6 bar max.temperatuur:60°C materiaal:glasvezelversterkt polyamide'

Complete adapting set made of brass alloy for polyethylene pipes. Yellow

Pre-assembled linear manifold with micrometric manoeuvre, with thermostatic option or electrical control, for return pipes. Compression ends. Without fittings. 3 outlets.

Sleutel voor het aandraaien van moeren. Voor Art. 3015, 3625, BI-219 en BI-220.

Linear manifold 1x3/4/18 with incorporated lockshield valve

Brass end coupling male x female x female. For linear manifolds series 7000PM, 7035M, 7035TEM and 7035DM. Yellow.

Klepinzetstuk voor thermostatische klep

Danfoss SSM underfloor heating manifold in stainless steel with output for 10 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.