Reciprozaag - pagina 7

Zaagblad, voor buizen, hout met spijkers, plaatmetaal, pallets, profielen, 5 stuks, lengte: 225 mm

Cirkelzaagblad, voor hout, lengte: 150 mm (pak van 100)

Zaagblad, 2 stuks

Saw blade, for sheet metal, solid pipes, 5 pieces, length: 150 mm, width: 19 mm

They are designed for Bosch universal tandem saws. TF 350 M HCS saw blade set, 2 pieces guarantee efficient cutting, as two blades cut together in tandem. The set's blades are intended for cutting materials up to 408 mm thick. At the same time, the blades are made of HCS material, which makes them effective for cutting insulation materials such as rock wool, glass wool and wood wool.
Knife set with 2 parts TF 350 WM
for insulation materials such as rock wool (green), glass wool (yellow), wood wool

Zaagblad, voor leidingen, plaatijzer, profielen, lengte: 100 mm, breedte: 25 mm

Zaagblad, voor carbon, gietijzer, cement, glass fiber reinforced plastic, fiber-reinforced plastic, lengte: 250 mm, breedte: 19 mm, korrel: 50

Zaagblad, voor hollow brick, lengte: 455 mm, breedte: 50 mm

Zaagblad, voor leidingen, plaatijzer, profielen, 3 stuks, lengte: 150 mm, breedte: 25 mm

Zaagblad, voor leidingen, plaatijzer, profielen, lengte: 150 mm, breedte: 25 mm

Zaagblad, voor leidingen, plaatijzer, profielen, 10 stuks, lengte: 225 mm, breedte: 25 mm

Saber saw blade, for metal, 2 pieces, length: 150 mm, width: 19 mm

Cirkelzaagblad, 5 stuks, lengte: 150 mm

Zaagblad, voor hout, plastic, spaanplaat, multiplex, constructieplaten, middelharde vezelplaat (MDF), 5 stuks, lengte: 200 mm

Reciprozaagblad HCS S 1542 K met 8.5 mm / 3 TPI tandafstand, 240 mm totale lengte en 219 mm getande lengte voor het zagen van hout en akoestische panelen.

Reciprozaagblad HCS, S 1542 K is van het type S 1542 K en biedt een grove 3 TPI tandafstand voor efficiënt zagen, met een lang getand deel dat is ontworpen voor langere zaagsneden in hout en akoestische platen.

For use with bayonet saws with a universal shaft system of 0.5". The S 3456 XF Progressor for Wood and Metal bayonet saw blade provides powerful and fast cuts in thick and thin materials. The progressively increasing tooth height provides strong, fast cuts in materials with a range of different densities, while the teeth are specially developed for use in many different types of wood and metal, including aluminum. In addition, the medium-thick blade material (1.25 mm) provides optimal balance between speed, flexibility, and stability during use. This bayonet saw blade is made from BIM (bimetal) and is optimized to cut through soft nails, soft steel, and iron-free metal components embedded in wood. It has a standard length of 200 mm with a cutting capacity of up to 150 mm.
S 3456 XF
BIM laid out milled
Wood with nails/metal , chipboard (<150mm), sheet metal plates , aluminum profiles (3-18mm), GFK/Epoxy (<150mm)

Zaagblad, voor leidingen, plaatijzer, profielen, lengte: 225 mm, breedte: 25 mm

Zaagblad, voor glas, staal, tough steel, vehicle rescue, car dismantling, 10 stuks, lengte: 225 mm, breedte: 20 mm

Zaagbladenset, voor schuim, rubber gecoat paardenhaar, 2 stuks

18V jigsaw - without battery and charger

Saw blade, for wood, high chromium steel (HCS), 5 pieces, length: 150 mm, for Makita DJR183, DJR183RT1J, JR002GZ, JR3070CT

Variable speed trigger control. LED job light. Joist hook. Tool-less blade change. Tool-less shoe adjustment. Ergonomic soft grip. Double Insulation. Vertical crank minimises blade deflection from aiming point especially in metal cutting.

Zaagblad, voor gipsplaat, 2 stuks, breedte: 18 mm, voor Makita DSD180

A member of the Power X-Change familyAnti-vibration function ensures low vibration during operationAdjustable soleplate for optimum blade useTool-less blade changes for rapid applicationErgonomic handling thanks to soft grip surfacesSupplied without battery and charger (available separately)Incl. high quality sawblade (wood)Number of strokes: 0 - 2,600 min^-1Stroke height: 26 mmCutting depth in wood: 180 mmCutting depth in plastic: 20 mmCutting depth in steel: 12 mmToolless saw blade change: yesNumber of accumulators: 0 Pieces