Reciprozaag - pagina 6

Zaagblad, voor thin-tough sheet metal, leidingen, stainless steel sheets, stainless steel profiles, glass fiber reinforced plastic, epoxy, lengte: 200 mm, breedte: 19 mm, 18 tanden

Saber saw blade, for wood, plastic, chipboard, plywood, medium-density fibreboard (MDF), construction wood, 5 pieces, length: 203 mm, width: 18 mm, for Makita DJR183, DJR183RT1J, DJR183Z, JR002GZ, JR3051TK, JR3070CT

Zaagblad, voor cellenbeton, 10 stuks, lengte: 300 mm, breedte: 22 mm

Saber saw blade, 5 stuks, lengte: 150 mm, voor Makita JR002GZ

It has a universal shank of 0.5". The S 522 EF Flexible for Metal bayonet saw blade is intended for use with compact saws. Its fine tooth pitch (1.4 mm) cuts through sheet metal with the most common thicknesses. In addition, the BIM blade (bimetal) is developed for long life when used in standard strength sheet steel. The fine tooth pitch allows cutting of semi-thick sheet metal with a thickness of 1.5 to 4 mm. The blade's short length (100 mm) has a cutting capacity of up to 50 mm and is ideal for use with compact cordless saws.S 522 EF
BIM, laid out, milled
Specially optimized for use in compact saws.
Thin sheets (1.5-4mm)

Zaagblad, voor leidingen, plaatijzer, profielen, 10 stuks, lengte: 150 mm, breedte: 19 mm

This jigsaw blade is ideal for use with compact battery-powered saws and features a universal shank of 0.5". The S 628 DF Special for Plaster jigsaw blade provides clean curved and plunge cuts in special materials. Its pointed teeth provide chip-free results, while its fully tapered shape makes it easy to reach difficult areas and allows for curved cuts. In addition, the blade's pointed end makes it suitable for plunge cutting. The blade is made of BIM (bimetal), and its fully hardened HSS (h...

Stanley SFMCS300B-XJ reciprozaag

Zaagblad, voor brandhout, niet-schurende houten materialen, vochtig hout, 25 stuks, lengte: 240 mm, breedte: 19 mm

Zaagblad, voor zacht hout, niet-schurende houtmaterialen, 25 stuks, lengte: 200 mm, breedte: 19 mm

M 1131 L
HCS, gelegd, geslepen, zeer scherpe tanden
Grof hout, brandhout, takjes, takken, tuinieren.

Reciprozaagblad met type S 644 D zaagsnede met 4.0 mm / 6 TPI tandafstand en een totale lengte van 152 mm.

Reciprozaagblad HCS, S 644 D is gespecificeerd met een getande lengte van 131 mm en is bedoeld voor hout en akoestische panelen.

• Type: S 644 D
• Tandafstand: 4.0 mm / 6 TPI
• Totale lengte: 152 mm
• Getande lengte: 131 mm

For use with bayonet saws with a universal shaft system of 0.5". The S 123 XF Progressor for Metal bayonet saw blade provides fast straight cuts in thick and thin metal materials. The progressively increasing tooth height (1.8 - 3.2 mm) provides fast cuts in materials with a wide range of densities. In addition, the BIM blade (bimetal) is developed for long life when used in standard strength steel pipes and profiles. It is equipped with a special tooth design for steel materials with various wall thicknesses from 1 to 8 mm. The blade has a standard length of 150 mm, providing a cutting capacity of up to 100 mm.
S123 XF
BIM, set, milled
Thin to thick plates (1-8mm), thin to heavy profiles (ø <100mm)

It has a universal shank of 0.5". The S 522 BF Flexible for Metal bayonet saw blade is intended for use with compact saws. The fine tooth height of 1.8 mm provides quick cuts. Additionally, the BIM blade (bimetal) is developed for long life when used in standard strength sheet steel. The fine tooth height also allows cutting in sheet metal with a thickness of 3 to 8 mm. The short length of 100 mm provides a cutting capacity up to 50 mm and is ideal for use with compact cordless saws.
S 522 BF
BIM, laid out, milled
Specially optimized for use in compact saws.
Strong plates (3-8mm), fast cut

For use with bayonet saws with a universal shaft system of 0.5". The S 644 D Top for Wood bayonet saw blade provides clean curved and plunge cuts in wood. Its sharp, set teeth ensure chip-free cuts. At the same time, the blade's fully pointed shape makes it easy to reach difficult areas and allows for curved cuts. The blade has a pointed end specifically designed for plunge cutting. It is made of HCS (high carbon steel), making it suitable for use in softwood, construction timber, and all non-abrasive woodworking materials in construction. It has a standard length of 150 mm, providing a cutting capacity of up to 100 mm.S 644 D
HCS, set teeth
Construction timber (<100 mm), wood paneling (<100 mm), boards: chipboard, MDF (6-60 mm), plywood, plastic (<100mm), specially designed for plunge cutting

PAIZ 32 EPC
HCS invalzaagblad voor hout
60 mm diepe invalsneden in zachthout (bijv. voor het installeren van ventilatieroosters)
Uitsparingen snijden in meubelonderdelen (bijv. om toegang te geven tot stopcontacten)
Flush snijden van bouwhout onderdelen (bijv. deuvels, pen-en-gatverbindingen)

Reciprozaagblad met HCS-constructie, type S 2345 X, 2.4–4.0 mm tandafstand (6–10 TPI), 203 mm totale lengte en 182 mm getande lengte voor het zagen van hout, akoestische panelen, kunststof en epoxyhars.

Reciprozaagblad HCS, S 2345 X is gespecificeerd met een 6–10 TPI tandontwerp ter ondersteuning van gecontroleerd zagen in verschillende materialen, terwijl de bladlengte van 203 mm en het zaaggedeelte van 182 mm bereik en werklengte bieden voor typische reciprozaagtoepassingen.

Zaagblad, voor hout, niet-schurende houten materialen, 2 stuks, lengte: 240 mm, breedte: 19 mm

Zaagblad, voor plaatijzer, 5 stuks, lengte: 92 mm

Saber saw blade, for wood, plastic, plasterboard, profile wood, 5 pieces, length: 300 mm, width: 19 mm, for Makita DJR183, DJR183RT1J, DJR183Z, JR002GZ, JR3070CT

Sneltrekzaag, zonder snoer, 150 mm, geen accu, 18 V

Saber saw blade, 5 pieces, length: 150 mm, width: 19 mm, for Makita DJR183RT1J, DJR183Z, JR002GZ, JR3051TK, JR3070CT

Saber saw blade, for wood, green wood, plywood, tree trunks, branches, 5 pieces, length: 300 mm, width: 19 mm, for Makita DJR186Z, DJR186ZK, DJR187Z, DJR187ZK, DJR360ZK, JR3051TK

Saber saw blade, for stainless steel, sheet metal, steel, iron, 5 pieces, length: 200 mm, for Makita JR002GZ