Tech-Protect Mobiel - Beschermend glas

Tech-Protect Glass Flex+ is a revolutionary hybrid glass that provides maximum screen protection without compromise. The ultra-thin design with a thickness of only 0.28 mm makes it virtually invisible and at the same time extremely durable. With a ceramic coating with a hardness of 7H, it effectively protects against scratches and pressure, maintaining perfect clarity and full sensitivity to touch. The biggest advantage? It doesn't crack or crumble like traditional tempered glass!

Tech-Protect Glass Flex+ is the perfect solution for those who value complete safety without compromise.

INSTALLATION INSTRUCTION:
1. The installation of this glass model is different from traditional tempered glass glued to a thin adhesive layer. Due to the thicker layer of glue, the process is a bit more demanding and requires precision.
2. Clean the watch screen thoroughly. Use a damp cloth to remove any dirt and fingerprints. Then wipe the screen with a dry, soft cloth to completely remove moisture. Finally, use dust stickers to get rid of dust and dust particles.
3. Carefully remove the protective film from the adhesive layer. Precisely align the glass with the screen and gently place it.
4. If any of the edges do not adhere properly, it is likely that the glass has been glued unevenly. In this case, they should be peeled off and re-glued until the desired effect is achieved.
5. Remove air bubbles by gently pressing the glass from the center to the edges. Use your finger or a soft cloth to do this, pushing the air out.
6. Due to the specificity of glass production (polishing, milling), the fitting may require several minutes of work. After proper installation, the final result is aesthetic and durable.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass, only 0.3mm thick.

The perfectly fitted design fully preserves the touchscreen's sensitivity. The manufacturer rates its hardness at 9H on a 10-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is crystal clear, preserving natural colors and display sharpness. An additional advantage is a special oleophobic coating that effectively minimizes the accumulation of fingerprints and other contaminants on the glass surface, making it easier to keep clean.

* Due to the various milling patterns on display edges, a slight air halo may appear around the screen after installing a screen protector! This is a natural occurrence and depends on the milling pattern of the screen in a given unit.

INSTALLATION INSTRUCTIONS:
1) Start the installation in the bathroom right after taking a bath - the water vapor will absorb all the dust from the atmosphere and it will not interfere with the installation.
2) Thoroughly clean and degrease the screen surface, then polish it to a shine with a dry cloth.
3) Install the cover as evenly as you can - you can position it using two leaves, sticking them to the side of the device.
4) Eliminate any air bubbles by pressing firmly in circular motions for several dozen seconds. Do this to ensure the adhesive bonds as strongly as possible to the screen.

Tech-Protect Glass Flex+ is a revolutionary hybrid glass that provides maximum screen protection without compromise. The ultra-thin design with a thickness of only 0.28 mm makes it virtually invisible and at the same time extremely durable. With a ceramic coating with a hardness of 7H, it effectively protects against scratches and pressure, maintaining perfect clarity and full sensitivity to touch. The biggest advantage? It doesn't crack or crumble like traditional tempered glass!

Tech-Protect Glass Flex+ is the perfect solution for those who value complete safety without compromise.

INSTALLATION INSTRUCTION:
1. The installation of this glass model is different from traditional tempered glass glued to a thin adhesive layer. Due to the thicker layer of glue, the process is a bit more demanding and requires precision.
2. Clean the watch screen thoroughly. Use a damp cloth to remove any dirt and fingerprints. Then wipe the screen with a dry, soft cloth to completely remove moisture. Finally, use dust stickers to get rid of dust and dust particles.
3. Carefully remove the protective film from the adhesive layer. Precisely align the glass with the screen and gently place it.
4. If any of the edges do not adhere properly, it is likely that the glass has been glued unevenly. In this case, they should be peeled off and re-glued until the desired effect is achieved.
5. Remove air bubbles by gently pressing the glass from the center to the edges. Use your finger or a soft cloth to do this, pushing the air out.
6. Due to the specificity of glass production (polishing, milling), the fitting may require several minutes of work. After proper installation, the final result is aesthetic and durable.

Tech-Protect Glass Flex+ is a revolutionary hybrid glass that provides maximum screen protection without compromise. The ultra-thin design with a thickness of only 0.28 mm makes it virtually invisible and at the same time extremely durable. With a ceramic coating with a hardness of 7H, it effectively protects against scratches and pressure, maintaining perfect clarity and full sensitivity to touch. The biggest advantage? It doesn't crack or crumble like traditional tempered glass!

Tech-Protect Glass Flex+ is the perfect solution for those who value complete safety without compromise.

INSTALLATION INSTRUCTION:
1. The installation of this glass model is different from traditional tempered glass glued to a thin adhesive layer. Due to the thicker layer of glue, the process is a bit more demanding and requires precision.
2. Clean the watch screen thoroughly. Use a damp cloth to remove any dirt and fingerprints. Then wipe the screen with a dry, soft cloth to completely remove moisture. Finally, use dust stickers to get rid of dust and dust particles.
3. Carefully remove the protective film from the adhesive layer. Precisely align the glass with the screen and gently place it.
4. If any of the edges do not adhere properly, it is likely that the glass has been glued unevenly. In this case, they should be peeled off and re-glued until the desired effect is achieved.
5. Remove air bubbles by gently pressing the glass from the center to the edges. Use your finger or a soft cloth to do this, pushing the air out.
6. Due to the specificity of glass production (polishing, milling), the fitting may require several minutes of work. After proper installation, the final result is aesthetic and durable.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Flex+ is a revolutionary hybrid glass that provides maximum screen protection without compromise. The ultra-thin design with a thickness of only 0.28 mm makes it virtually invisible and at the same time extremely durable. With a ceramic coating with a hardness of 7H, it effectively protects against scratches and pressure, maintaining perfect clarity and full sensitivity to touch. The biggest advantage? It doesn't crack or crumble like traditional tempered glass!

Tech-Protect Glass Flex+ is the perfect solution for those who value complete safety without compromise.

INSTALLATION INSTRUCTION:
1. The installation of this glass model is different from traditional tempered glass glued to a thin adhesive layer. Due to the thicker layer of glue, the process is a bit more demanding and requires precision.
2. Clean the watch screen thoroughly. Use a damp cloth to remove any dirt and fingerprints. Then wipe the screen with a dry, soft cloth to completely remove moisture. Finally, use dust stickers to get rid of dust and dust particles.
3. Carefully remove the protective film from the adhesive layer. Precisely align the glass with the screen and gently place it.
4. If any of the edges do not adhere properly, it is likely that the glass has been glued unevenly. In this case, they should be peeled off and re-glued until the desired effect is achieved.
5. Remove air bubbles by gently pressing the glass from the center to the edges. Use your finger or a soft cloth to do this, pushing the air out.
6. Due to the specificity of glass production (polishing, milling), the fitting may require several minutes of work. After proper installation, the final result is aesthetic and durable.

The Tech-Protect Hydro flex+ hydrogel film is a modern screen protector that combines flexibility and durability. Made of high-quality TPU plastic, it perfectly adapts to any surface of the screen, including its curved edges.

The most important advantage of Hydro flex+ is the comprehensive protection of the screen against mechanical damage during everyday use. The film has innovative self-healing properties that allow for self-smoothing of minor scratches caused during the operation of the device. Despite its advanced protection, the film maintains full optical clarity, ensuring faithful reproduction of the colors of the display and unchanged sensitivity of the touchscreen.

In the set you get as many as two protective films along with complete installation kits, which allows you to protect your device for a long time. Thanks to the flexibility of the TPU material, the installation of the film is simple and intuitive, and the end result guarantees almost invisible protection that does not affect the aesthetics or functionality of the smartphone.

Tech-Protect 5906302361236 scherm- & rugbeschermer voor mobiele telefoons Doorzichtige schermbeschermer Motorola 2 stuk(s)

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may form around the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass SPY+ is a premium tempered glass with advanced privacy technology that protects your data from unauthorized access. A special privacy layer limits the visibility of the screen to outsiders looking from the side, so that the content displayed on your phone remains visible only to you. It's the perfect solution to protect the confidentiality of conversations and messages while traveling, working in public places, or everyday use.

The glass provides excellent protection for the display against scratches, bumps and dents thanks to its 9H hardness. It does not affect the touch sensitivity or color saturation, while maintaining the full functionality of the phone. The high-quality oleophobic coating minimizes the amount of fingerprints left behind, and the milled 2.5D edges ensure a smooth touch and comfort of use. The incredible smoothness of the surface has a positive effect on the comfort of everyday work with the phone.

The easy installation procedure makes the installation affordable for any user, even those who are inexperienced in putting on lenses. Perfect clarity preserves the original image display quality.

* Remember to remove and re-add fingerprints after installing the glass, if any.
** Due to the variety of milling of the edges of the displays, after the installation of any glass, a delicate air halo "may" form around the screen. This condition results from the very milling of the screen in a given piece.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* The glass is compatible with most cases available on the market.
** Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen! This is a natural situation and depends on the milling of the screen in a given piece.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Quick Set+ tempered glass is a premium screen protector that combines durability, comfort and modern technology. Made of 9H hardness glass, it provides exceptional impact and scratch resistance. Thanks to the innovative mounting system with installation frame, the application of the glass is extremely fast, precise and trouble-free – without the risk of air bubbles and exposure to dust.

The crystal clear surface guarantees excellent image quality and an extremely smooth tactile experience. The special oleophobic coating effectively reduces the formation of fingerprints and facilitates the condensation of water on the surface of the glass.

Tech-Protect Quick Set+ is the perfect solution for all those who want maximum protection and comfort of using their smartphone.

* Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom immediately after bathing – the water vapor will absorb dust from the air and will not interfere with the installation.
2) Place the glass in the designated place, put the phone into the mounting box, and then clean the screen thoroughly, removing greasy marks and dust.
3) Close the box and make sure the glass is positioned correctly with the positioning holes.
4) Pull the starter film to start the process of sticking the glass to the screen.
5) Press with your finger on the marked area and hold for about 20 seconds until air starts to escape from under the glass on its own. Additionally, you can use the included squeegee to thoroughly squeeze any residual air out from under the surface of the glass.
6) Tear off the top protective film and remove any air bubbles by swiping your finger in a circular motion - installation complete!

The Tech-Protect Hydro Flex+ hydrogel film is a modern screen protector that, thanks to its flexible and self-healing surface, effectively protects the display against scratches, dirt and minor mechanical damage.

It perfectly adapts to the shape of the screen, including curved edges, providing full coverage without affecting image quality and touch sensitivity. The ultra-thin design guarantees high transparency and comfort of use, and easy application allows for quick and trouble-free application of the film without the formation of air bubbles.

CHECK HOW TO INSTALL:

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface thoroughly, then use a dry cloth to polish it to a shine.
3) Install the shell as evenly as you can with positioning stickers.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible. Leave smaller blisters and unevenness on their own within 24-48 hours.

Tech-Protect Glass Spy+ is the perfect solution for users who value the privacy and security of their data. The privacy technology used limits the visibility of the screen to outsiders, protecting against unauthorized access, which contributes to increasing the confidentiality of our conversations and messages.

The Tech-Protect Glass Spy+ also provides excellent protection for the display against scratches, bumps, and dents, ensuring that your phone stays in top condition for a long time. Its hardness level is rated by the manufacturer at 9H on a ten-point scale. It does not affect the touch sensitivity and saturation of the displayed colors. In addition, it is covered with a high-quality oleophobic coating, which minimizes the number of fingerprints left.

It is also worth noting the incredible smoothness of the touch, which affects the comfort of using the phone.
In addition, the easy installation procedure makes it affordable for anyone, even those who are inexperienced in glass installation.

* Remember to remove and re-add fingerprints after installing the glass, if any.
** Due to the variety of milling of the edges of the displays, after the installation of any glass, a delicate air halo "may" form around the screen. This condition results from the very milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Made of aluminum and glass, the camera lens caps from Tech-Protect Camring Fit+ are a very stylish way to protect this part of the device. The pads provide protection against scratches and breakage.

The set comes with a perfectly cut mounting frame, thanks to which you can position the glass perfectly. The manufacturer has simplified the installation method to such an extent that it is fully intuitive for every user.

Tech-Protect Anti Spy Glass Pro+ is a perfect solution for users who value the privacy and security of their data. The privacy technology used limits the visibility of the screen to outsiders, protecting against unauthorized access, which contributes to increasing the confidentiality of our conversations and messages.

Tech-Protect Anti Spy Glass Pro+ also provides excellent protection for the display against scratches, bumps, and dents, ensuring that your phone stays in top condition for a long time. Its hardness level is rated by the manufacturer at 9H on a ten-point scale. It does not affect the touch sensitivity and saturation of the displayed colors. In addition, it is covered with a high-quality oleophobic coating, which minimizes the number of fingerprints left.

It is also worth noting the incredible smoothness of the touch, which affects the comfort of using the phone.
In addition, the easy installation procedure makes it affordable for anyone, even those who are inexperienced in glass installation.

* Remember to remove and re-add fingerprints after installing the glass, if any.
** Due to the variety of milling of the edges of the displays, after the installation of any glass, a delicate air halo "may" form around the screen. This condition results from the very milling of the screen in a given piece.

Check how easy it is:

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

The Tech-Protect Camalloy Fit+ cover is a precision-crafted accessory that effectively protects the camera module in your smartphone. Made of durable aluminum alloy, it protects against scratches, dirt and minor damage during daily use.

Thanks to its slim design and perfect fit, the hood does not affect the quality of photos or recordings, and its installation is quick and simple – just place it on the camera module to make it snug against the surface.

The minimalist design makes the cover almost invisible, maintaining the elegant appearance of the device. It's a practical and aesthetic solution for people who want to provide their smartphone with maximum protection without sacrificing style.

Tech-Protect Supreme Set+ is an advanced hydrogel film that provides reliable protection for your smartwatch's screen. The exceptional flexibility of the material guarantees a perfect fit to the curved display, protecting it from scratches and minor damage. A special coating prevents fingerprints, keeping the screen clean.

The film is distinguished by its self-healing properties, which allow for the automatic removal of small scratches within a few hours. The ultra-thin design maintains full transparency and excellent image quality without affecting the sensitivity of the touchscreen. Precise adjustment to the shape of the display ensures full coverage and protection without interfering with the functioning of the device.

Simple installation is facilitated by the tools included in the kit, including the positioning frame, which eliminates the risk of air bubbles and guarantees perfect application of the film.

Tech-Protect Glass Fit+ is a tempered glass that combines protection with aesthetics. Precisely milled edges and minimal thickness make the glass almost disappear on the screen, while maintaining full touch sensitivity.

The 9H hardness on a ten-point scale means that the glass can withstand contact with keys, coins and other sharp objects that you carry in your pocket every day. The thickness of only 0.3 mm practically does not change the profile of your smartphone and does not affect the responsiveness of the screen. The hardened material dissipates the force of the impact, protecting the display from cracks during falls.

The oleophobic coating minimizes the accumulation of fingerprints and makes it easier to keep the glass clean. Crystal clarity preserves natural colors and image sharpness without affecting the quality of the display. The glass design ensures compatibility with most available cases, so you can freely personalize the look of your phone.

Tech-Protect Quick Set+ tempered glass is a premium screen protector that combines durability, comfort and modern technology. Made of 9H hardness glass, it provides exceptional impact and scratch resistance. Thanks to the innovative mounting system with installation frame, the application of the glass is extremely fast, precise and trouble-free – without the risk of air bubbles and exposure to dust.

The crystal clear surface guarantees excellent image quality and an extremely smooth tactile experience. The special oleophobic coating effectively reduces the formation of fingerprints and facilitates the condensation of water on the surface of the glass.

Tech-Protect Quick Set+ is the perfect solution for all those who want maximum protection and comfort of using their smartphone.

* Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom immediately after bathing – the water vapor will absorb dust from the air and will not interfere with the installation.
2) Place the glass in the designated place, put the phone into the mounting box, and then clean the screen thoroughly, removing greasy marks and dust.
3) Close the box and make sure the glass is positioned correctly with the positioning holes.
4) Pull the starter film to start the process of sticking the glass to the screen.
5) Press with your finger on the marked area and hold for about 20 seconds until air starts to escape from under the glass on its own. Additionally, you can use the included squeegee to thoroughly squeeze any residual air out from under the surface of the glass.
6) Tear off the top protective film and remove any air bubbles by swiping your finger in a circular motion - installation complete!

Tech-Protect Glass Flex+ is a revolutionary hybrid glass that provides maximum screen protection without compromise. The ultra-thin design with a thickness of only 0.28 mm makes it virtually invisible and at the same time extremely durable. With a ceramic coating with a hardness of 7H, it effectively protects against scratches and pressure, maintaining perfect clarity and full sensitivity to touch. The biggest advantage? It doesn't crack or crumble like traditional tempered glass!

Tech-Protect Glass Flex+ is the perfect solution for those who value complete safety without compromise.

INSTALLATION INSTRUCTION:
1. The installation of this glass model is different from traditional tempered glass glued to a thin adhesive layer. Due to the thicker layer of glue, the process is a bit more demanding and requires precision.
2. Clean the watch screen thoroughly. Use a damp cloth to remove any dirt and fingerprints. Then wipe the screen with a dry, soft cloth to completely remove moisture. Finally, use dust stickers to get rid of dust and dust particles.
3. Carefully remove the protective film from the adhesive layer. Precisely align the glass with the screen and gently place it.
4. If any of the edges do not adhere properly, it is likely that the glass has been glued unevenly. In this case, they should be peeled off and re-glued until the desired effect is achieved.
5. Remove air bubbles by gently pressing the glass from the center to the edges. Use your finger or a soft cloth to do this, pushing the air out.
6. Due to the specificity of glass production (polishing, milling), the fitting may require several minutes of work. After proper installation, the final result is aesthetic and durable.

Tech-Protect Glass Flex+ is a revolutionary hybrid glass that provides maximum protection for the watch screen without compromise. The ultra-thin design of just 0.28 mm makes it virtually invisible yet extremely durable. The ceramic coating with a hardness of 7H effectively protects against scratches and pressure, while maintaining perfect clarity and full touch sensitivity of the screen.

The biggest advantage of Glass Flex+ hybrid glass is its resistance to cracking and shattering – unlike traditional tempered glass, it does not break into sharp shards in the event of an impact, which significantly increases the safety of use. The flexible design allows for a snug fit against the watch screen without creating air bubbles.

Tech-Protect Glass Flex+ is the ideal solution for active users who value reliable screen protection on a daily basis and during sports.