Gereedschap - pagina 97

The fine wire staples fit staple guns from the following brands: AEG, Arrow, Black+Decker, Bosch, Esco, kwb, Maestri, Mekano, Metabo, Neckermann/Bullcraft Novus Outifrance Piranha Rocagraf Stanley Skil and Wolfcraft. The fine wire staples type 53 are ideal for a multitude of general DIY tasks and professional stapling jobs. They are suitable for a wide range of thin materials such as fabrics paper flat wooden mouldings and wire mesh fencing. In addition the staples are particularly suitable for applications where the staple back should not be pressed into the material. The staples have a narrow back which allows them to penetrate deeply into the material providing good grip with a very discreet staple back

Deuvelzetterset voor Ø 6 mm, gemaakt door Bosch.

Bosch Dowel Setter Set for Ø 6 mm is ontworpen voor gebruik met deuvels met een diameter van 6 mm en wordt vermeld met een 6 mm diameterspecificatie.

Dust extraction
Dust extraction for PMF 190 E, PMF 250 CES and GOP 300
for extracting sanding dust in combination with the sanding plate AVZ 93 G (not Starlock version).
Important! When working with the Starlock sanding plate AVZ 93 G, dust extraction with spare part number 2.609.256.D57 must be used.

KNIPEX 00 20 12 V01 Schroevendraaier-set (zelfbedieningskaart/blister)

Clean for Metal cup steel brush provides an extra fine surface finish. The cup steel brush is equipped with copper-coated, corrugated wire for light to moderately demanding cleaning tasks. It is suitable for removing coatings and rust and sanding paint on medium to large surfaces in metal and non-ferrous metals. This cup steel brush is also suitable for roughening, matting, and cleaning formwork boards and cladding. The copper-coated wires on the brush provide protection against corrosion. Brush wires are available in different thicknesses depending on how strong the abrasive effect needs to be. Thicker wires are more aggressive and provide a coarser but faster surface finish, while thinner wires provide finer, smoother surface results. It is intended for use with angle grinders with M14 thread.
Cup Steel Brush - Corrugated Wire, Brass Plated
Suitable For Light to moderately demanding cleaning tasks on medium to large surfaces of metal or base metals such as removal of coatings, removal of rusts, cleaning formwork boards & facades , roughening , matting , removing lacquer.
Fits Angle grinders with M 10 or M 14 thread as well as GGS 6 S Professional
Advantage: Corrosion protection thanks to brass-plated wire.

It is compatible with angle grinders. The Standard for Ceramic diamond cutting disc provides reliable cuts in tiles. Its continuous cutting edge delivers precise results in all types of tiles. Furthermore, the quality standards of the disc are ensured by Bosch's diamond competence center in Switzerland. Use this disc for cutting ceramic materials, porcelain and fine stoneware

Bosch 2 609 256 417 angle grinder accessory Cutting disc

Schopmes voor metaaldetectie met constructie van koolstofstaal, een gekarteld lemmet, een antislip rubberen handgreep met ergonomische duimgroef, handbescherming en een meegeleverde draaghoes.

GARRETT Shovel-Knife is ontworpen voor veldverkenning in zachte grond en compactere bodem, en helpt bij nauwkeurig graven, wortels doorsnijden en gedetecteerde objecten efficiënt terugvinden.

• Lemmet van koolstofstaal voor veeleisende terreincondities
• Kartelrand voor wortels en dichte grasmat
• Antislip rubberen handgreep voor stevige grip
• Lemmetbeschermer met handbescherming
• Draaghoes voor bevestiging aan de riem

Een praktisch hulpmiddel voor liefhebbers van verkenning die controle, mobiliteit en betrouwbare prestaties in het veld nodig hebben.

The Heavy Metal Cup Steel Brush provides an extra coarse surface finish. This cup brush is equipped with braided wire for demanding cleaning tasks. It is ideal for use on metal and suitable for cleaning tasks on medium to large steel surfaces, such as removing heavy rust, undercoating, paint or varnish. The brush wires are available in different thicknesses depending on how strong the abrasive effect needs to be. Thicker wires are more aggressive and provide a coarser but faster surface finish, while thinner wires provide finer, smoother surface results. It is designed for use with angle grinders with M14 thread.
Cup Steel Brush - Twisted Wire
Suitable for demanding cleaning tasks on medium to large metal surfaces such as removing rust or undercoating, removing paint or varnish.
Fits angle grinders with M 10 or M 14 thread as well as GGS 6 S Professional

Light and flexible hose, excellent resistance to oils, solvents, and both aqueous and non-aqueous solutions. Long service life with outstanding aging qualities.

Olfa-XSR-600

600 mm
2-componenten handvat
Behangkrabber

Halfronde platbektang, 125 mm
met afgeplatte en geplande neus (3 cm)

Kopieeradapter

The ANCEL L8000 is a professional automotive leak detector with dedicated low-pressure EVAP and high-pressure Turbo modes. Its built-in pump generates up to 20 psi, while smoke output of 6–8 l/min supports leak detection in various vehicle systems. The device performs both smoke tests and pressure drop tests, with adjustable test pressure and duration. Professional Mode provides preset configurations for common systems, while Custom Mode allows manual pressure adjustment. A 4-inch colour LCD displays key test parameters, and the built-in self-test checks the detector’s own airtightness. The L8000 can be used for intake, exhaust, vacuum, turbocharger and EVAP systems, as well as hoses and gaskets.

The ANCEL DS600 ELITE is a professional OBD2 diagnostic scanner with an 8-inch touchscreen, Android 10.0 and a wired OBD connection. It supports vehicle system diagnostics, DTC reading and clearing, real-time parameter monitoring, actuator tests, coding and reset functions. AutoSearch can automatically identify the vehicle using its VIN, while diagnostic data, reports, data streams and images can be saved for later analysis. With 4 GB of RAM, 64 GB of storage and a 4150 mAh battery, the scanner is equipped for extended diagnostic work. Support for CAN-FD, DoIP and other common protocols provides broad compatibility with modern vehicles.

The ANCEL MT310 is a motorcycle diagnostic scanner with a 3.5-inch colour TFT display and support for BMW, Harley, Honda, Yamaha, Suzuki and Kawasaki motorcycles. It provides access to diagnostic functions such as reading and clearing fault codes, viewing live data and checking vehicle information. Auto VIN enables automatic vehicle identification, while manual selection is available when required. The scanner also supports OBDII and protocols including CAN, J1850 PWM, J1850 VPW, ISO9141 and KWP2000, making it suitable for many motorcycles manufactured since 2000. Available functions vary according to the motorcycle model and configuration.

Combinatietang, 240 mm

Fladdyvel GR 0

Universele werkbank voor afkortzaag - MSS 1610
Aluminium frame
Totale lengte: 1100-1590 mm
Belasting: Max. 100 kg
Werkhoogte: 845-955 mm
Montagebreedte/diepte: max. 455 mm
Snelontgrendelingssysteem
Verstelbare poten
Opbergruimte
Opvouwbaar
Handvat om het product gemakkelijk te verplaatsen

KNIPEX 00 21 20 LE Gereedschapskoffer "Vision24" leeg

It is suitable for use with handheld, table-mounted portable milling machines and CNC. The Wood Core Box standard drill ensures optimal cutting when milling rounded notches. It has a high-quality carbide cutting edge that provides durable and reliable cutting results. In addition, the hammer drill prevents kickback by limiting the thickness of the generated chips. This product is intended for milling rounded notches on decorative panels, boards, and building surfaces in soft and hard solid wood and composite wood

KNIPEX 11 06 160 T Afstriptang met openingsveer, universeel geïsoleerd met meercomponenten-omhullingen, VDE-gekeurd, met geïntegreerde geïsoleerde bevestigingshaak om een valbeveiliging aan te brengen verchroomd 160 mm

It is compatible with hammer drills. The auxiliary handle makes it safe to work with the drill.
Handle for hammer drills

It is compatible with an SDS plus chisel attachment, or it can be used directly in SDS plus rotary hammers with rotation stop. The SDS plus flat chisel can be used for standard chiseling for various demolition and renovation tasks. Good material removal is enabled by the flat cutting edge. The chisel is intended for use in concrete and brick for tasks such as adaptation work, destruction or removal of walls, renovation of joints, and clearing reinforcements.Flat Chisel
SDS plus flat chisel for standard chiseling in connection with various demolition and renovation tasks

Diamantdoorslijpschijf voor bouwmaterialen van Bosch met 115 mm diameter en 1,7 mm snijbreedte.

Bosch Universal diamantdoorslijpschijf is ontworpen als een diamantdoorslijpschijf voor bouwmaterialen en biedt een schijfdiameter van 115 mm en een snijbreedte van 1,7 mm voor gecontroleerde sneden.