Bosch Gereedschap - pagina 31

System accessories PFS 1000 and PFS 2000; Fine spray gun

Safety instruction: Only use Bosch hot air guns with electronic regulation. The narrowing nozzle for the hot air gun is used to create a concentrated hot air flow or as an adapter for special nozzles.
Narrowing nozzle
as a round nozzle for a concentrated heat beam or as an adapter for special nozzles

Graveerder, 9 W

De schuurplaat met klittenband voor 125 mm schuurdiameter met klittenband.

They can be used for staplers from AEG, Bosch, Esco, Kwb, Lux, Mekano, Metabo, Novus, Peugeot, Rocafix, Rocagraf , Stanley , Swingline and Wolfcraft. The staples type 47 are for fastening thin and thick materials. They are made of hardened steel wire with a length between 16 and 30 mm. The width of the head is 1.8 or 2.8 mm depending on the device.

The flat reserve sanding finger is ideal for sanding in narrow spaces. It is intended for use on Bosch delta sanders.
Sanding tongue, oval

Deze cirkelzaag verloopring heeft een verstelbaar gat waardoor hij perfect op elke machine past.
Het gat werkt met of zonder verloopringen voor verschillende maten.
Kostenbesparing door het uitwisselen van gereedschap/zaagbladen voor verschillende gatmaten.
Geweldige flexibiliteit voor compatibiliteit met alle merken.
Leveringsomvang: 1 x verloopring voor cirkelzaagblad: diameter 15 mm, gat 10 mm, dikte 0,55 mm

The protective screen for Turbo eccentric sanders is a practical solution to avoid damaging the corners of the workpiece, while also supporting and protecting the backing pads - especially when sanding in corners. Its design makes it robust, and it can easily be attached to the Turbo eccentric sander's mounting system simply by clicking it on and off. Protective screen for GET 75-150

They are designed for the Bosch compressed air nail gun GSK 64 Professional. The staples with countersunk head, 1.6/16 g, are galvanized and therefore rust-protected. This makes them ideal for indoor construction tasks within usage class 1 (DIN EN 1995-1-1). They are suitable for a variety of purposes in box construction such as fastening upholstery, door and window frames, picture frames, furniture manufacturing and wall coverings. They can also be used in fiber gypsum boards. These staples provide a strong joint with heads that are virtually invisible, making it quick and easy to install board cladding, baseboards and decorative moldings. The staples with countersunk head, 1.6/16 g, are made in Europe which ensures consistent high quality.
galvanized finish

Filter

Deze cirkelzaag verloopring heeft een verstelbaar gat waardoor hij perfect op elke machine past.
Het gat werkt met of zonder verloopringen voor verschillende maten.
Kostenbesparing door het uitwisselen van gereedschap/zaagbladen voor verschillende gatmaten.
Geweldige flexibiliteit voor compatibiliteit met alle merken.
Leveringsomvang: 1 verloopring voor cirkelzaagblad: diameter 20 mm, gat 10 mm, dikte 0,8 mm

The Standard for Stone cutting disc provides reliable cutting in stone. The disc contains an efficient blade of silicon carbide and resin, specially developed for working with stone. The product is intended for use with Bosch angle grinders. Bosch cutting discs comply with the maximum safety requirements according to EN 12413.
Straight

Diamant doorslijpschijf, voor keramiek, hard tile, hard stone, 125 mm, voor P/N: 06017C9201

A double-ended tip increases the value for the user because it can be combined with different or identical head types. It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks

Bosch 2 609 390 591 drill attachment accessory Hole saw adaptor

Bosch 2 608 900 907 benodigdheid voor handmatig schuren Rol schuurpapier 1 stuk(s)

Breekhamer, 1500 W, SDS-max, 16.8 Joules

Lijmpistool op basis van smeltlijm, draadloos, 7 mm, 2 batterijen, 1.2 V

The cup nylon brush provides a good, fine finish on various materials without damaging the surface. It is equipped with K80 aluminum oxide-coated nylon bristles that perfectly conform to the contours of the object. The abrasive coating continuously releases abrasive grains during use, ensuring consistent material removal. This cup nylon brush is suitable for cleaning tasks such as removing rust from small to medium-sized metal surfaces. It is also suitable for sanding paint, smoothing, matte sanding and cleaning metal, PVC and wood. It can also be used for texturing wood. The brush wires are available in different thicknesses depending on how strong the abrasive effect needs to be. Thicker wires are more aggressive and provide a coarser but faster surface finish while thinner wires provide finer, smoother surface results. It is designed for use with drills with a 6 mm shaft.
Cup steel brush - nylon wire with corundum abrasive K80
Suitable for removing paint, removing rust, smoothing out surfaces and cleaning wood, metal and PVC on smaller to medium-sized areas; texturing wood.
Perfectly adapts to the outline of the object without significantly changing its surface.
Works with constant breakdown effect as abrasives are constantly released during use.

Band saw blade, for metal, plastic, non-ferrous metal, length: 733 mm (pack of 2)

System accessories IXO; IXO Collection - grill fan accessory

The HSS countersink drill bit with a cylindrical shaft provides even countersinking for screws and deburring of holes in hard materials. The ground countersink drill bit is made of HSS (high-speed steel) and provides optimal surface quality for easy work on hard materials. Three 90-degree cutting edges continuously deliver outstanding vibration- and burr-free results when cutting through hard surfaces. The HSS countersink drill bit is manufactured according to DIN 335. The best result is achieved by working at low cutting speed. It is suitable for use on non-ferrous metals, steel, and cast iron and has a cylindrical shaft system