Bosch Gereedschap - pagina 28

They can be used for staplers from AEG, Bosch, Esco, Kwb, Lux, Mekano, Metabo, Novus, Peugeot, Rocafix, Rocagraf , Stanley , Swingline and Wolfcraft. The staples type 47 are for fastening thin and thick materials. They are made of hardened steel wire with a length between 16 and 30 mm. The width of the head is 1.8 or 2.8 mm depending on the device.

Do not use on shaft bushings. The collet clamps the milling cutter. Always use the correct size collet to avoid danger during use.
Collet

They are designed for the Bosch compressed air nail gun GSK 50 Professional. The staples, 1.2/18 g, are galvanized and therefore rust-protected. They are specially designed for indoor use in class 1 (DIN EN 1995-1-1) and can be used for box construction, furniture upholstery, door and window frames, picture frames, furniture manufacturing, wall coverings and in fiber plasterboard. They provide a strong joint with heads that are virtually invisible and make it quick and easy to install board cladding, baseboards and decorative moldings. The staples, 1.2/18 g., Are made in Europe which ensures consistent high quality.
galvanized finish

Afvalbak met filter (zwarte afwerking)

It is intended for Bosch sanders. The sanding sole with hook and loop closure is a spare sanding sole intended for standard use.
Sanding sole

A double-ended tip increases the value for the user because it can be combined with different or identical head types. It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks

A double-ended tip increases the value for the user because it can be combined with different or identical head types. It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks

.

The reducer ring for circular saw blades has an adjustable holder hole, so the ring fits perfectly on all machines.
Reducer rings for circular saw blades
Tooth thickness from 1.7 mm to max. 2.2 mm

Deuvelzetterset met Ø 8 mm diameter voor uitgelijnde deuvelplaatsing.

Bosch Dowel Setter Set for Ø 8 mm is een Bosch-accessoire met een gespecificeerde diameter van 8 mm om aan je deuvelmaatvereisten te voldoen.

They are intended for use on planers. Grinding plates for planers are designed for grinding paint, putty and plaster. They come in a range of different hardnesses depending on the material and desired surface result.
Grinding plate

It fits Bosch plate and universal axes. The movable blade is a spare blade designed for easy cutting of a wide range of materials.
Movable knife

When making a template to be used with a copy ring, the distance between the router bit and the copy ring must be taken into account. This distance is calculated using the following formula: (copy ring diameter (K) - router bit diameter (F))/2. The copy ring for routers runs along the template and transfers its shape to the workpiece. It is indispensable for working with templates and has a bayonet lock for quick changes without tools.
Copy Ring
with snap lock, no tools

The fine wire staples fit staple guns from the following brands: AEG, Arrow, Black+Decker, Bosch, Esco, kwb, Maestri, Mekano, Metabo, Neckermann/Bullcraft Novus Outifrance Piranha Rocagraf Stanley Skil and Wolfcraft. The fine wire staples type 53 are ideal for a multitude of general DIY tasks and professional stapling jobs. They are suitable for a wide range of thin materials such as fabrics paper flat wooden mouldings and wire mesh fencing. In addition the staples are particularly suitable for applications where the staple back should not be pressed into the material. The staples have a narrow back which allows them to penetrate deeply into the material providing good grip with a very discreet staple back

Deuvelzetterset voor Ø 6 mm, gemaakt door Bosch.

Bosch Dowel Setter Set for Ø 6 mm is ontworpen voor gebruik met deuvels met een diameter van 6 mm en wordt vermeld met een 6 mm diameterspecificatie.

Borstel voor boormachines met nylondraad en korundschuurmiddel K80, ontworpen voor werk op ferrometalen en wapeningsstaal.

Bosch Brush for drills – nylon wire with corundum abrasive K80, 25 mm heeft een borstelkop met 25 mm diameter, 1 mm draaddikte en een 6 mm schacht, met een maximale snelheid van 4500 rpm.

Dust extraction
Dust extraction for PMF 190 E, PMF 250 CES and GOP 300
for extracting sanding dust in combination with the sanding plate AVZ 93 G (not Starlock version).
Important! When working with the Starlock sanding plate AVZ 93 G, dust extraction with spare part number 2.609.256.D57 must be used.

Clean for Metal cup steel brush provides an extra fine surface finish. The cup steel brush is equipped with copper-coated, corrugated wire for light to moderately demanding cleaning tasks. It is suitable for removing coatings and rust and sanding paint on medium to large surfaces in metal and non-ferrous metals. This cup steel brush is also suitable for roughening, matting, and cleaning formwork boards and cladding. The copper-coated wires on the brush provide protection against corrosion. Brush wires are available in different thicknesses depending on how strong the abrasive effect needs to be. Thicker wires are more aggressive and provide a coarser but faster surface finish, while thinner wires provide finer, smoother surface results. It is intended for use with angle grinders with M14 thread.
Cup Steel Brush - Corrugated Wire, Brass Plated
Suitable For Light to moderately demanding cleaning tasks on medium to large surfaces of metal or base metals such as removal of coatings, removal of rusts, cleaning formwork boards & facades , roughening , matting , removing lacquer.
Fits Angle grinders with M 10 or M 14 thread as well as GGS 6 S Professional
Advantage: Corrosion protection thanks to brass-plated wire.

It is compatible with angle grinders. The Standard for Ceramic diamond cutting disc provides reliable cuts in tiles. Its continuous cutting edge delivers precise results in all types of tiles. Furthermore, the quality standards of the disc are ensured by Bosch's diamond competence center in Switzerland. Use this disc for cutting ceramic materials, porcelain and fine stoneware

Kopieeradapter

It is suitable for use with handheld, table-mounted portable milling machines and CNC. The Wood Core Box standard drill ensures optimal cutting when milling rounded notches. It has a high-quality carbide cutting edge that provides durable and reliable cutting results. In addition, the hammer drill prevents kickback by limiting the thickness of the generated chips. This product is intended for milling rounded notches on decorative panels, boards, and building surfaces in soft and hard solid wood and composite wood

It can be used for glue guns of all brands including Bosch, Black+Decker, Bostik, Bühnen, Metabo, Pattex, Peugeot, Steinel and Uhu. The glue stick creates an elastic but durable joint and glues in a gray color that makes it perfect for use with cable tensioners and electrical work. It is also suitable for PVC and carpets. This glue stick is made of hot melt adhesive and is ideal for use in repair and fastening tasks as well as installation, sealing and caulking work