Bosch Gereedschap - pagina 14

The fine wire staples fit staple guns from the following brands: AEG, Arrow, Black+Decker, Bosch, Esco, kwb, Maestri, Mekano, Metabo, Neckermann/Bullcraft Novus Outifrance Piranha Rocagraf Stanley Skil and Wolfcraft. The fine wire staples type 53 are ideal for a multitude of general DIY tasks and professional stapling jobs. They are suitable for a wide range of thin materials such as fabrics paper flat wooden mouldings and wire mesh fencing. In addition the staples are particularly suitable for applications where the staple back should not be pressed into the material. The staples have a narrow back that allows them to penetrate deeply into the material providing good grip with a very discreet staple back. Weather-resistant stainless steel staples

They can be used for staplers from AEG, Bosch, Esco, Kwb, Lux, Mekano, Metabo, Novus, Peugeot, Rocafix , Rocagraf , Stanley , Swingline and Wolfcraft. The staples type 47 are for fastening thin and thick materials. They are made of hardened steel wire with a length between 16 and 30 mm. The width of the head is 1.8 or 2.8 mm depending on the device

Designed for all Bosch hot air guns. The glass protection nozzle for the hot air gun has special side protectors that protect heat-sensitive materials such as glass.
Glass protection nozzle with special side protection. Protects heat-sensitive materials such as glass

The extra handle provides better safety and comfort during work. It ensures a good grip on the machine and is intended for use on eccentric sanders.
Handle

It fits the following Bosch vacuum cleaner hoses: 1 609 202 230, 1 610 706 001, 1 ​​610 ​​793 ​​002, ​​2 ​​600​​​ ​793​​​ ​009,​​​ ​2​​​ ​607​​​ ​000​​​ ​167, and ​​2 ​​607​​​ ​000​​​ ​837. The reducer adapter is intended for Bosch vacuums. The adapter reduces the hose diameter from 35 mm to19 mm.
Adapter for hoses:1 609 202 230, 1 610 706 001, 1 610 793 002 ,2 600 793 009 ,2 607 000 ‑167 ,and ‑837
Diameter:35/19mm

Bosch 2 608 000 190 sander accessory 1 pc(s)

The crevice tool fits vacuum hoses on Bosch vacuums. The crevice tool is specially designed to reach hard-to-access areas. It is ideal for reaching into corners and down into joints.
Crevice nozzle

The blowing nozzle is an accessory for use with Bosch GBL V18-120
Blowing nozzle

Werklicht, LED

Fladdyvel GR 0

It is compatible with systems with hexagonal shafts. The spade chisel with hex holder can be used for standard chiseling for various demolition tasks. The chisel has a wide cutting edge and provides a high material removal rate in masonry and mortar while also being designed for adaptation work in asphalt, masonry, and concrete.
Spade chisel that can be used for standard chiseling for various demolition tasks in masonry and mortar

Collet, 12.7 mm

It is easy to use, even for narrow cuts in a variety of types of sheet metal. The punch allows for straight cuts in metal when used with Bosch sheet punches. It handles straight cuts and complicated cutouts without deforming the material.
Punch for straight cuts

The disc steel brush provides an extra fine surface finish. The disc is equipped with copper-coated, corrugated wire for easy and moderately demanding cleaning tasks on small surfaces. It is ideal for removing heat tint on welds and also suitable for cleaning smaller surfaces in metal or non-ferrous metals, edges or grooves. This disc steel brush is also suitable for removing rust, roughening, matting, texturing and sanding paint on metal and wood. The copper-coated wires on the disc provide protection against corrosion. Brush wires are available in different thicknesses depending on how strong the abrasive effect needs to be. Thicker wires are more aggressive and provide a coarser but faster surface finish while thinner wires provide finer, smoother surface results. It is intended for use with drills with a 6 mm shaft.Disc steel brush - corrugated wire, brass-plated
Optimally suitedfor removal of heat tint on welds.
Suitable foreasy to moderately demanding cleaning tasks on small surfaces,in grooves or edges of metal or non-precious metals such as removal of rust,ruffling,mattering,paint removal,and processing wood.
Advantage:Corrosion protection thanks to brass-plated wire

Chisel designed for removing large areas of roughcast and light masonry demolition work. Wide flat chisel for knocking down plastered walls, breaking up and loosening soil, floor coverings and bitumen.

Filter voor EasyVac 3
Robuust, langdurig en bestand tegen stof

Sisal koord borstel voor het voorpolijsten.

System accessories PFS 1000 and PFS 2000; Fine spray gun

Designed for Bosch belt sanders. The sanding sole provides an optimal sanding pattern suitable for very soft sanding. The instruction manual should be read before using the sanding sole.
Fine grinding plate with graphite backing

The dowel head is equipped with a centering point and support cutter, which ensures crack-free drilling of holes and uniform borehole walls. The wood dowel set provides a practical solution for mounting dowels in wood. The set comes with a dowel head, depth stop, dowel setters, profiled wooden dowels and wood glue. The set is ready to use and includes all the accessories you need for efficient work in soft and hard wood.
Wood Dowel Set with 32 pieces

The mixer tool has a shaft with an external hexagon and mixes materials from top to bottom without splashing. It has an external M14 thread and is suitable for emulsion, high-gloss paint, cement, joint compound, and cement-bound materials. The tool is intended for drill machines with manual mixing function such as GRW 9, GRW 11, GRW 12E and GRW 18-2E.
Stirring tool
SW 13 mm, drill chuck 16 mm