Bosch Gereedschap - pagina 12

It consists of two blades and four screws. The six-piece scissor blade set is a set with extra blades for Bosch slitting shears. Knife, chrome steel for cutting Inox

Safety instruction: Only use Bosch hot air guns with electronic regulation. The welding nozzle for the hot air gun can be used for all Bosch hot air gun models with electronic regulation. It has an opening for supplying plastic welding wire with a diameter of up to 4 mm. This accessory must be used in combination with a narrowing nozzle with a diameter of 9 mm.
Welding nozzle
with opening for supplying plastic welding wire up to Ø 4 mm. In connection with narrowing nozzle Ø 9 mm

It has a stepless adjustment for precise indication of the limits of the drilling depth. Designed for use on all materials. This accessory can be used with all common drilling machines and used together with an auxiliary handle. The depth stop (without scale) is made of steel and provides precise drilling depth when using a drill.
Depth stop
Fits extra handle 1 612 025 032
Made of steel, without scale

Universal long-sleeved connector connects 19 mm vacuum hoses to Bosch vacuums.
Hose sleeve

The protective screen for Turbo eccentric sanders is a practical solution to avoid damaging the corners of the workpiece, while also supporting and protecting the backing pads - especially when sanding in corners. Its design makes it robust, and it can easily be attached to the Turbo eccentric sander's mounting system simply by clicking it on and off. Protective screen for GET 75-150

Do not use on shaft bushings. The collet clamps the milling cutter. Always use the correct size collet to avoid danger during use.
Collet

Bosch EasyInflate 18V-500 elektrische luchtpomp 0,03 bar 530 l/min

Boorstiftset, voor soft tile, hard tile, 5 stuks, 5 mm, 6 mm, 8 mm, 10 mm, 4 mm, lengte: 90 mm

Transforms the AdvancedTrimRouter 18V-8 from a trim to a plunge router

The Heavy Metal Cup Steel Brush provides an extra coarse surface finish. This cup brush is equipped with braided wire for demanding cleaning tasks. It is ideal for use on metal and suitable for cleaning tasks on medium to large steel surfaces, such as removing heavy rust, undercoating, paint or varnish. The brush wires are available in different thicknesses depending on how strong the abrasive effect needs to be. Thicker wires are more aggressive and provide a coarser but faster surface finish, while thinner wires provide finer, smoother surface results. It is designed for use with angle grinders with M14 thread.
Cup Steel Brush - Twisted Wire
Suitable for demanding cleaning tasks on medium to large metal surfaces such as removing rust or undercoating, removing paint or varnish.
Fits angle grinders with M 10 or M 14 thread as well as GGS 6 S Professional

They are for both DIY tasks and professional purposes with staple guns from the following brands: Bostitch, Esco, kwb, Lux, Novus, Rocafix, Rocagraf and Swingline. Fine wire staples of type 58 are ideal for a multitude of general stapling tasks in a wide range of thin materials such as textiles, paper, flat wooden moldings and wire mesh. They are particularly suitable for stapling thin materials where the staple back must not be pressed into the material. The staples also have a narrow back that allows them to penetrate deeply into the material and provide a good grip with a very discreet staple back

The paint mixer is suitable for stirring paint and varnishes. It has a 6mm straight shaft and is designed for use with all drill chucks with a diameter of at least 10mm. Paint mixer 6 mm round shaft

The cup nylon brush provides a good, fine finish on various materials without damaging the surface. It is equipped with K80 aluminum oxide-coated nylon bristles that perfectly conform to the contours of the object. The abrasive coating continuously releases abrasive grains during use, ensuring consistent material removal. This cup nylon brush is suitable for cleaning tasks such as removing rust from small to medium-sized metal surfaces. It is also suitable for sanding paint, smoothing, matte sanding and cleaning metal, PVC and wood. It can also be used for texturing wood. The brush wires are available in different thicknesses depending on how strong the abrasive effect needs to be. Thicker wires are more aggressive and provide a coarser but faster surface finish while thinner wires provide finer, smoother surface results. It is designed for use with drills with a 6 mm shaft.
Cup steel brush - nylon wire with corundum abrasive K80
Suitable for removing paint, removing rust, smoothing out surfaces and cleaning wood, metal and PVC on smaller to medium-sized areas; texturing wood.
Perfectly adapts to the outline of the object without significantly changing its surface.
Works with constant breakdown effect as abrasives are constantly released during use.

Achterkussen, 150 mm

Do not use on shaft bushings. The collet clamps the milling cutter. Always use the correct size collet to avoid danger during use.
Collet

They are intended for use with parallel guide 2 607 001 387 and router circle cutter 2 609 200 143 and are suitable for routers. The extra long guide rods extend up to 800 mm when greater length is required.
Guide rod

The Wood Straight-bore head standard provides optimal cutting for common milling tasks. It has a high-quality tungsten carbide cutting edge that provides durable and reliable cutting results. Additionally, the bore head prevents kickback by limiting the thickness of the generated chips. It is intended for milling grooves, joints, notches and feather joints in soft and hard solid wood as well as composite wood. The bore head's long working length provides greater flexibility and deeper drilling in thick work materials. It is suitable for use with handheld, table-mounted portable milling machines and CNC machines.

Schuurroller, 250 W

The polishing set S24 with 8 parts is for polishing with all types of standard drills with a chuck of at least 8 mm in diameter. The discs have a diameter of 125 mm and can be used at speeds up to 4,500 rpm.
Polishing set S24 with 8 parts
Backing pad, polishing sponge, polishing cap, grinding discs (corundum/paper)

It is made of lightweight plastic. For circular saws. The plastic transport case is used for safe storage and transport of Bosch Power Tools

They are intended for the Bosch compressed air nail gun GSK 18 V-Li Professional. The staples with countersunk head 20°, 1.6/16 g, are intended for indoor use in usage class 1 (DIN EN 1995-1-1). The staples are galvanized for rust protection and are therefore suitable for box construction, furniture upholstery, door and window frames, picture frames, furniture manufacturing, wall cladding and fiber gypsum board. These staples provide a strong joint with heads that are virtually invisible and make it quick and easy to install board cladding, baseboards and decorative moldings. The staples with countersunk head 34° , 1.6/16 g ,are made in Europe and have a consistently high quality.
galvanized finish