Thermal Grizzly Intel 1851 Delid-Die-Mate Heater
The Intel 1851 Delid-Die-Mate Heater V1 is a specially designed heating element for the Intel 1851 Delid-Die-Mate V1. The heater raises the temperature of both the CPU and the delidder to 165°C, the necessary temperature for delidding. The operation is controlled via a control unit with an OLED display, which is connected to the heater with two cables. A laptop/smartphone charger with at least 65 watts of power and a USB Type-C connector, which is not included, is required for the heater to operate. A small amount of thermal paste is also needed.
Heating element for warming the CPU
Designed for the Intel 1851 Delid-Die-Mate V1
Follow the warning instructions!
Scope of Delivery:
1x Intel 1851 Delid-Die-Mate Heater V1
1x Angle wrench
1x TG Cleaning Wipes
1x Kryonaut, 1g
Warning Instructions:
Note: When delidding with the Intel 1851 Delid-Die-Mate V1, the CPU should be heated to 165°C (the melting point of indium is 157°C) to liquefy the indium, making it easier to remove the heat spreader. This minimizes mechanical stress on the chip and helps prevent damage. Otherwise, there is a high risk that the CPU could be damaged during delidding.
Caution: delidding a CPU can be dangerous. Any damaged caused by this will not be covered by warranty. Make sure to ressearch how to before trying.
CPU koeler
-
dezen Thermal Compound 4.63 W - 2 g - Thermische pasta
Op voorraad - 2-3 werkdagen levertijd5,07 €
Case accessoires
-
DUTZO Air Duster Turbo
Op voorraad - 2-3 werkdagen levertijd64,90 € -
DUTZO Air Duster & Vacuum cleaner 2-in-1 - 3 speed
Besteld: verwacht op voorraad 7-8-202674,90 € -
DUTZO Air Duster - 1 speed
Op voorraad - 2-3 werkdagen levertijd39,90 €
-
DUTZO Air Duster Pro - 3 speed
Op voorraad - 2-3 werkdagen levertijd64,90 €
Bovenstaande specificaties en vermeldingen kunnen zonder voorafgaande kennisgeving door de fabrikant worden gewijzigd. Sommige teksten kunnen automatisch of machinaal zijn gegenereerd en daardoor misleidende teksten opleveren.