Boorstift, voor beton, versterkt beton, graniet, gehard beton, gneis, hamerboor, 25 mm, SDS-plus, lengte: 600 mm

Achterkussen, 125 mm

Bosch ‎2608644043 cirkelzaagblad 18,4 cm 1 stuk(s)

Microteq teeth (produced internally) made of high-density carbide combined with a robust tooth shape that is ideal for universal use. Depending on the number of teeth, different results can be achieved with all Expert for Wood circular saw blades, which have an ATB (alternate top bevel) tooth geometry: When the blade is equipped with a high number of teeth, it provides clean cuts, whereas a low number of teeth provides powerful and efficient cuts. It is compatible with plunge saws, handheld saws, multi-cutters, miter saws, compound miter saws and table saws as well as horizontal/vertical radial arm saws

Bosch 2 608 901 238 benodigdheid voor handmatig schuren Ultrafijne korrel 1 stuk(s)

Bosch 2 608 901 223 benodigdheid voor handmatig schuren Rol schuurpapier Gemiddelde korrel 1 stuk(s)

Bosch Expert C470 schuurpapier

Bosch Expert C470 schuurpapier

Bosch Expert C470 schuurpapier

Boorstift, voor beton, versterkt beton, hamerboor, 30 mm, SDS-plus, lengte: 520 mm

Diamant doorslijpschijf, voor beton, versterkt beton, bakstenen, dakpan, soft stone, 125 mm, voor P/N: 06017C9201

Bosch Expert C470 schuurpapier

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Package contains one piece.

Flap wheel, for wood, metal, polyvinyl chloride (PVC), 60 mm, width: 40 mm, grit: P60

Zaagblad, voor hout, metaal, hout met nagels, spaanplaat, epoxy, plastic verstevigd met glasvezel, 25 stuks, lengte: 300 mm, breedte: 19 mm

Gatenzaag, voor steel sheets, stainless steel sheets, 20 mm

Rainwater filter

Slijpschijf, voor roestvrij staal, staal, 5 stuks, 125 mm, korrel: 80, voor GWX Professional 750-125

Sanding roll, korrel: P120, 93 mm x 5 m

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, extending the life of the bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.

Diamantboor, voor beton, 6 mm, cilindrisch, lengte: 150 mm

Boorstiftset, voor metaal, 10 stuks, voor UniversalImpact 18V-60

Hogesnelheidsfrees, voor zachthout, hardhout, speedboor, plat, 32 mm, zeskant, lengte: 400 mm

Bosch UniversalCut 18V-65 electrische decoupeerzaag 8000 spm 1 kg

Boorstift, hamerboor, 9 mm, SDS-plus, lengte: 165 mm