Bosch - pagina 77

Hogesnelheidsfrees, voor zachthout, hardhout, speedboor, plat, 22 mm, zeskant

Bosch Extra Hard-schroefbits

Boorstift, voor beton, hamerboor, 13 mm, SDS-plus, lengte: 165 mm

Beitel, voor beton, bakstenen, solid brick, concrete building block, sand brick, lime brick, plat, zeskant, lengte: 400 mm, breedte: 35 mm

Boorstift, voor spaanplaat, zachthout, spaanplaat, speedboor, 26 mm, zeskant, lengte: 400 mm

Boorstift, voor spaanplaat, zachthout, spaanplaat, speedboor, 17 mm, zeskant, lengte: 400 mm

Boorstift, voor spaanplaat, zachthout, spaanplaat, speedboor, 10 mm, zeskant, lengte: 152 mm

Slijpschijf, voor roestvrij staal, 25 stuks, 115 mm, X-LOCK, korrel: 60

Diamond cutter, voor keramiek, 45 mm, X-LOCK

Bladenset figuurzaag, voor hout, hardhout, 15 stuks, T-schacht

Grasschaarmes, lengte: 100 mm, voor Advanced Shear 18V-10

Draadkopborstel, voor metaal, non-ferrometaal, 75 mm, X-LOCK

Draadborstel voor metaal, 115 mm, X-LOCK

The drill holder for drill hammers can be converted from an SDS max shaft to an SDS plus hammer drill bit

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, and extends the life of the bit. The drill head provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling, and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.

Boor, spiraalboor, 10 stuks, 4.5 mm, cilindrisch, lengte: 80 mm

3mm diameter wood twist drill with countersink and a working length of 30mm

The dowel drill bit with a countersink effectively drills, countersinks, and chamfers in one step in wood. Mounted on a dowel drilling head, it solves all three tasks cheaply and efficiently. The countersink is suitable for hard and soft wood, laminated and non-laminated chipboards, and plywood. This multifunctional bit made of tool steel has a 90-degree countersinking angle, five cutting edges, and can also be used as a depth stop. The countersink comes with a hex key, dowel drilling head, and holder-mounted countersink. The countersink is intended for drill stands and screwdrivers.

Boor, spiraalboor, 10 stuks, 4 mm, cilindrisch, lengte: 75 mm

It is suitable for use on wood, plastic, and non-ferrous metals and has a cylindrical shaft system. The HSS countersink drill head with a cylindrical shaft provides smooth countersinking for screws and deburring of holes in soft materials. The ground countersink drill head is made of HSS (high-speed steel), which provides optimal surface quality for even work on smooth surfaces. Outstanding results in soft materials thanks to the 90-degree cutting edges that continuously function free of splinters and without leaving burrs.
Cone countersink set with 3 parts
1 cutter at 90°, Ø 8-10-12 mm
Suitable for wood, plastic, alloys

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the bit has a 135-degree point and a diameter tolerance of h8. It has a cylindrical shank system (the shank has the same diameter as the bit) and is intended for use in drilling stands and screwdrivers.
Package with 10 pieces.