Bosch - pagina 134

Keyless chuck, for wood, metal, 0.8-10 mm

Routerbit voor hout, afrondfrees, lengte: 53 mm

Bosch 2 609 256 902 boor 1 stuk(s)

Boorset, voor metaal, spiraalboor, 25 stuks

X440 Best for Wood and Paint removes material with impressive speed when sanding old paint, varnish or wood surfaces. The strong abrasive grain of semi-loose aluminum oxide guarantees effective sanding. In addition, the backing material is made of robust X-cloth with a quality belt joint that ensures high strength during demanding work. Furthermore, the grains are provided with an electrostatic, open surface that ensures uniform dust removal and uninterrupted sanding. This product is intended for sanding wood and painted surfaces and is suitable for smoothing out edges. The product is also ideal for planing grooves and edges. The abrasive grain is attached using a fully synthetic resin bond, which ensures exceptional durability in tough tasks. The X440 Best for Wood and Paint sanding belt fits belt sanders.
Package of 3 pieces.

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral bore head is manufactured according to DIN 338. The bore head is of type N (not angle) with a 135-degree point and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the bore head) and is intended for use in drilling stands and screwdrivers.
Package with one piece.

Routerbit

The dowel setter is made of tool steel. The dowel setter makes it easy to mark dowel holes. The dowel setter enables quick and uncomplicated marking of holes, which makes your work easier. Dowel setter set with 4 pieces

Boor, spiraalboor, 4 mm, cilindrisch, lengte: 75 mm (pak van 2)

Diamantslijper, voor tegels, keramiek, harde keramiek, 20 mm, M14

Drill bit, for concrete, masonry, hammer bit, 22 mm, SDS-plus, length: 250 mm

It is easy to use, even for narrow cuts in a variety of types of sheet metal. The punch allows for straight cuts in metal when used with Bosch sheet punches. It handles straight cuts and complicated cutouts without deforming the material.
Punch for straight cuts

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, extending the life of the bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.

The polishing set S24 with 8 parts is for polishing with all types of standard drills with a chuck of at least 8 mm in diameter. The discs have a diameter of 125 mm and can be used at speeds up to 4,500 rpm.
Polishing set S24 with 8 parts
Backing pad, polishing sponge, polishing cap, grinding discs (corundum/paper)

Metal drill 7 pcs, Wood drill 7 pcs, Masonry drill 7 pcs and 25 pcs bit set

Boorstiftset, voor metaal, 7 stuks

X440 Best for Wood and Paint removes material with impressive speed when sanding old paint, varnish or wood surfaces. The strong abrasive grain of semi-loose aluminum oxide guarantees effective sanding. In addition, the backing material is made of robust X-cloth with a quality belt joint that ensures high strength during demanding work. Furthermore, the grains are provided with an electrostatic, open surface that ensures uniform dust removal and uninterrupted sanding. This product is intended for sanding wood and painted surfaces and is suitable for smoothing out edges. The product is also ideal for planing grooves and edges. The abrasive grain is attached using a fully synthetic resin bond, which ensures exceptional durability in tough tasks. The X440 Best for Wood and Paint sanding belt fits belt sanders.
Package of 3 pieces.

Expert for Metal cutting disc provides efficient cutting in metal with maximum safety. The disc is made of first-class aluminum oxide with advanced phenolic resin for demanding work and delivers good results. In addition, the disc's precision-produced fiberglass mesh ensures high stability, durability, and safety during cutting. Use this disc for cutting in metal. Bosch cutting discs comply with the maximum safety requirements according to EN 12413, FEPA, and oSa. The disc is compatible with angle grinders.
Straight

Diamantslijpschijf levert turbo-prestaties met een 230 mm diameter, 22.23 mm asgat, 2.6 mm dikte en ondersteuning voor snelheden tot 6600 rpm.

Bosch Turbo diamond cutting disc is ontworpen voor betrouwbaar snijden met naleving van EN 13236-normen, waardoor het een solide keuze is voor compatibele haakse slijpers.

Schuurvellen set bevat 25 driehoekige vellen met korrel 180 voor deltaschuurmachines, ontworpen voor gedetailleerd schuren in hoeken en op randen.

Bosch schuurvellen set met 25 stuks voor deltaschuurmachines, korrel 180 is een universele, hoogwaardige schuurpapier vellen set met een driehoeksvorm van 93 mm en 6 stofgaten voor praktisch schuren en stofafzuiging.

Boor- en beitelset, voor beton, metselwerk, graniet, hamerboor, platte beitel, puntbeitel, 5 stuks: 5 mm, 6 mm en 8 mm SDS-plus. Lengte: 160 mm en 110 mm

Schroevendraaier- en boorbitset met 14 stuks voor veelzijdig gebruik, met Torx-, Phillips-, Pozidriv- en sleufbits plus boorbits in meerdere diameters en een magnetische bithouder.

Bosch Mini X-Line wordt geleverd in een kunststof koffer en bevat boorbits (3, 4, 5, 6 en 8 mm) en 25 mm schroevendraaierbits in de maten T20, T25, PH1, PH2, PZ1, PZ2, SL4.0 en SL6.0, ontworpen voor Bosch EasyImpact 600 en UniversalImpact 700.

Diamantdoorslijpschijf van Bosch met een diameter van 230 mm en een snijbreedte van 1,7 mm voor het snijden van bouwmaterialen.

Bosch Universal diamantdoorslijpschijf is een diamantdoorslijpschijf ontworpen voor bouwmaterialen, met een zaagblad-/schijfdiameter van 230 mm en een snijbreedte van 1,7 mm voor nauwkeurige sneden.

Schuurpapier vellen set met 25 driehoekige vellen voor deltaschuurmachines, korrel 120, met 6 stofafzuigopeningen.

Bosch schuurvellen set met 25 stuks voor deltaschuurmachines, korrel 120 is ontworpen voor schuur- en polijsttaken en biedt een consistente afwerking met korrel 120 in een driehoekig formaat voor nauwkeurig werk.