Bosch - pagina 133

It is compatible with SDS max shaft systems. The SDS max flat chisel can be used for standard chiseling for various demolition tasks in concrete and bricks. Good material removal for lighter tasks is made possible by the flat cutting edge. The chisel is intended for use in tasks such as grooving, demolition, and fitting work as well as renovation of joints and clearing of reinforcements.
Flat Chisel
SDS max flat chisel for standard chiseling for various demolition tasks in concrete and bricks

Boor, voor metaal, spiraalboor, 10 stuks, 9.5 mm, lengte: 125 mm

Schroevendraaier bit, 3 stuks, torx, T30, hexagonaal, lengte: 25 m

Routerbit, voor zachthout, hardhout, afronding, 36.7 mm, lengte: 70 mm

Boor, voor plastic, spaanplaat, massief hout, Corian, medium-density fibreboard (MDF), 20 mm, recht, lengte: 56 mm

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill bit is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill bit's efficient U-shape with 2 flutes ensures effective dust removal, less friction, reduced heat development and wear, and extends the life of the drill bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill bit is PGM-certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling, and efficient fastening. The drill bit is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package with 1 piece.

The dowel setter is made of tool steel. The dowel setter makes it easy to mark dowel holes. The dowel setter enables quick and uncomplicated marking of holes, which makes your work easier. Dowel setting set with 4 parts

Screwdriver

Schuurpad, 150 mm, rond

Drill bit, for concrete, masonry, hammer bit, 20 mm, SDS-plus, length: 300 mm

Schroevendraaierset met 11 stuks inclusief een flexibele plastic verlenging (300 mm).

Accessoire-adapter, voor hogedrukreiniger

The CYL-5 drill bit head guarantees extra long lifespan when drilling in concrete and stone. The carbide material developed by Bosch, combined with diamond-ground cutting edges, provides an extremely durable drill bit head. The variable design with 2 flutes and a short, variable pitch significantly reduces flute friction and ensures effective dust removal and less wear. The Bosch Power Grip shank system enables 100% power transfer from the machine to the drill bit head. This means that the power is optimally utilized directly for the drilling task, and reduced power loss means less wear. For drilling fixing holes in concrete, natural stone, and artificial stone materials. The drill bit head is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, accurate boreholes, and efficient fastening. The drill bit head is compatible with cylindrical shank systems for all powered or battery-powered hammer drills.
Package of 1 piece.

It is intended for GPO 14 CE Professional. The backing pad is used with foam or lambskin discs for polishing paint, stone and paint.
Support disc
For foam disc and lambswool disc
with Velcro tape

Slang, voor stofzuiger

Diamantslijpschijf van Bosch voor bouwmaterialen, met een diameter van 180 mm en 1.7 mm zaagsnede.

Ontworpen voor zaagtaken, Bosch Universal diamond cutting disc combineert een duurzaam diamantschijf-formaat met een 180 mm maat voor compatibiliteit met geschikte gereedschappen.

It is made of lightweight plastic. For angle grinders. The plastic transport case is used for safe storage and transport of Bosch Power Tools.
Transport case
for all GWS Ø 180-230 from production date 1998

Stofbak

Diepteaanslag set inclusief sleutel.

They are intended for the Bosch compressed air nail gun GSK 18 V-Li Professional. The staples with countersunk head 20°, 1.6/16 g, are intended for indoor use in usage class 1 (DIN EN 1995-1-1). The staples are galvanized for rust protection and are therefore suitable for box construction, furniture upholstery, door and window frames, picture frames, furniture manufacturing, wall cladding and fiber gypsum board. These staples provide a strong joint with heads that are virtually invisible and make it quick and easy to install board cladding, baseboards and decorative moldings. The staples with countersunk head 34° , 1.6/16 g ,are made in Europe and have a consistently high quality.
galvanized finish

The Optiline Wood circular saw blade provides precise cuts in all types of wood. The blade's high-quality precision-ground carbide teeth provide clean cuts, while its core blade, made of dimensionally stable SK5 hardened steel (> 40 HRC), ensures accuracy. At the same time, the blade's expansion slots reduce vibration during use, which has a noise-reducing effect and reduces heat development. This saw blade is used in all types of wood and wood materials. Depending on the number of teeth, different results can be achieved with all Optiline Wood circular saw blades that have ATB tooth geometry (Alternate Top Bevel): when the blade is equipped with a high number of teeth, it provides clean cuts, whereas a low number of teeth provides powerful and efficient cuts. It is compatible with handheld miter saws, compound miter saws and table saws.

Cirkelzaagblad, voor hout met spijkers, 5 stuks, lengte: 190 mm, breedte: 19 mm

Koppelstuk voor koppelingsmoment
Voor nauwkeurige aanpassing van schroefdiepte
Geschikt voor Bosch accu-schroevendraaier IXO III, IXO IV en IXO V.

Handvat M 8 met trillingscontrole

Expert for Metal cutting disc provides efficient cutting in metal with maximum safety. The disc is made of first-class aluminum oxide with advanced phenolic resin for demanding work and delivers good results. In addition, the disc's precision-produced fiberglass mesh ensures high stability, durability, and safety during cutting. Use this disc for cutting in metal. Bosch cutting discs comply with the maximum safety requirements according to EN 12413, FEPA, and oSa. The disc is compatible with angle grinders.
Straight
Fits chop saws/stationary cut-off/grinding machines
Max power 3 HP/2.4 kW
Reinforced with 2 layers of external fabric