The C410 Standard for Wood and Paint is characterized by a high material removal rate when hand sanding wood and paint. This universal hand sanding product ensures smooth and consistent material removal thanks to its robust abrasive surface coated with semi-open aluminum oxide grains. In addition, the electrostatically open surface allows for good dust extraction, preventing clogging and ensuring effective sanding and clean surface results. Intended for all types of hand sanding of wood, wood-based materials, veneers as well as solid surfaces, it is suitable for intermediate sanding of lacquer on surfaces and rounded edges. Also ideal for roughening and grinding down paint, lacquer, putty as well as roughening and fine grinding feather edges, primer coats or putty. The blade is covered with strong semi-open aluminum oxide abrasive grains that ensure uniform surface quality. The electrostatically open coating ensures consistent material removal. Additionally the abrasive grain is attached using a fully synthetic resin bond on C-weight backing material which provides good flexibility and optimal grinding properties.The C410 Standard for Wood & Paint Sandpaper Roll can be torn into appropriate pieces making it suitable to use with hand-sanding blocks

Diepteaanslag set inclusief sleutel.

Schuurband, voor hout, verf, lak, 3 stuks, korrel: 40, 75 mm x 457 mm

Boor, voor beton, metselwerk, hamerboor, 12 mm, SDS-plus, lengte: 315 mm

X440 Best for Wood and Paint removes material with impressive speed when sanding old paint, varnish or wood surfaces. The strong abrasive grain of semi-loose aluminum oxide guarantees effective sanding. In addition, the backing material is made of robust X-cloth with a quality belt joint that ensures high strength during demanding work. Furthermore, the grains are provided with an electrostatic, open surface that ensures uniform dust removal and uninterrupted sanding. This product is intended for sanding wood and painted surfaces and is suitable for smoothing out edges. The product is also ideal for planing grooves and edges. The abrasive grain is attached using a fully synthetic resin bond, which ensures exceptional durability in tough tasks. The X440 Best for Wood and Paint sanding belt fits belt sanders.
Package of 3 pieces.

Schuurpad adapter, 150 mm

Zaagblad, voor hout, plastic, spaanplaat, multiplex, constructieplaten, middelharde vezelplaat (MDF), 5 stuks, lengte: 150 mm

Routerbitset, voor hout, non-ferrometaal, kegelvormige roterende raspbit, cilindrische roterende raspbit, sferische roterende raspbit, 3 stuks, 16 mm, 7-16 mm lengte: 60 mm ,65 mm ,48mm

Drill bit, for concrete, masonry, hammer bit, 20 mm, SDS-plus, length: 300 mm

Schuurpad, 115 mm, rond, korrel: hard

Boor, voor beton, metselwerk, hamerboor, 12 mm, SDS-plus, lengte: 615 mm

Bosch HSS spiraalboren geslepen

This jigsaw blade is ideal for use with compact battery-powered saws and features a universal shank of 0.5". The S 628 DF Special for Plaster jigsaw blade provides clean curved and plunge cuts in special materials. Its pointed teeth provide chip-free results, while its fully tapered shape makes it easy to reach difficult areas and allows for curved cuts. In addition, the blade's pointed end makes it suitable for plunge cutting. The blade is made of BIM (bimetal), and its fully hardened HSS (h...

Boor, spiraalboor, 3 mm, cilindrisch, lengte: 61 mm (pak van 10)

The self-tightening drill chuck is intended for Bosch hammer drills. The self-tightening drill chuck is a Bosch system drill chuck with a clamping capacity of Ø 1.5 to 13 mm. It easily tightens the drill and does not require a key. The self-tightening drill chuck is intended for Bosch hammer drills. Self-tightening drill chuck, chrome-plated

Bit houder, 1/4", 11 mm, lengte: 75 mm

Schuurpad, voor hout, verf, gips en vulmiddel, 125 mm, korrel: hard

25 mm schroevendraaierbit, 2xPZ2

Boor, voor metaal, spiraalboor, 5 stuks, 8 mm, zeskantig, lengte: 117 mm

Bosch HSS Twist Drill Bits PointTeQ

The long ground HSS spiral drill bit for drilling deep holes through metal with maximum precision. Its length allows for deep drilling with this long drill head. The exposed 135-degree two-part self-centering tip of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the two-part tip, it is also unnecessary to mark pilot holes in advance or pilot bore up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. The long ground HSS spiral drill bit is manufactured according to DIN 340. The drill head is of type N (not angle) with a 135-degree tip and a diameter tolerance of h8. This drill head is designed for drilling deep holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. It has a cylindrical shaft system (the shaft has the same diameter as the drill head) and is intended for use in drilling stands and screwdrivers
Package contains one piece.

The step drill bit is made of HSS (high-speed steel) and provides a long lifespan when used with coolant. Laser-marked numbers on both flutes provide highly visible and durable marking of the hole diameter. Additionally, the 3-flat shank prevents slipping in the drill chuck and provides efficient transmission with high torque. The HSS step drill head delivers smooth, burr-free drilling in multiple diameters with a single bit. It is ideal for deburring, drilling round holes, and enlarging existing ones. No center punch is needed because the split point allows for easy starting. Its CNC-ground flute enables optimized chip removal and less vibration for smooth drilling. The most optimal cutting edge and absolute smoothness are ensured thanks to axial and radial relief grinding. This step drill bit is suitable for use on thin materials such as non-ferrous metals, sheet plastic, sheet steel, plastic, and stainless steel.
9 steps Ø 4-5-6-7-8-9-10-11-12 mm

The SDS plus-5 drill bit ensures problem-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling work, so the user is not burdened. The drill bit is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 1 piece.