The cup steel brush provides an excellent, fine surface finish. The brush has wavy wire for light to moderately demanding cleaning tasks. It is suitable for removing coatings and rust and for cleaning formwork boards and cladding. This brush is ideal for use on steel surfaces and is also suitable for roughing, sanding, and paint stripping. The bristles are available in different thicknesses depending on how strong the abrasive effect needs to be. Thicker wires are more aggressive and provide a coarser but faster surface finish, while thinner wires provide finer, smoother surface results. It is intended for use with drills with a 6 mm shaft.
Cup Steel Brush - Wavy Wire
Suitable For light to moderately demanding cleaning tasks on small to medium-sized metal surfaces such as removing coatings, rust removal, cleaning formwork boards and facades, roughening,sanding,and paint stripping.

F355 Best for Coatings and Composites ensures an impressive finish when sanding and grinding abrasive surfaces and composite materials. Blades with silicon carbide abrasive grains ensure precise material removal for professional results. Additionally, the electrostatic, open surface with spaces between the grains ensures uniform dust removal, preventing clogging. The sanding roll is designed for grinding hard materials such as stone and composite materials as well as intermediate sanding during painting work. It is also suitable for sanding and grinding paint, primer, putty, and plastic. Also suitable for precision work on ferrous and non-ferrous materials. F355 Best for Coatings and Composites has a closed antistatic coating to reduce dust adhesion to the workpiece or machine. The abrasive grain is attached using a fully synthetic resin bond that ensures exceptional durability in tough tasks. The product's backing material is F/C paper for optimal sanding properties. The F355 Best for Coatings and Composites abrasive sheet fits all common flat grinders.
Package of 5 pieces.

X440 Best for Wood and Paint removes material with impressive speed when sanding old paint, varnish or wood surfaces. The strong abrasive grain of semi-loose aluminum oxide guarantees effective sanding. In addition, the backing material is made of robust X-cloth with a quality tape joint that ensures high strength during demanding work. Furthermore, the grains are provided with an electrostatic open surface that ensures uniform dust removal and uninterrupted sanding. This product is intended for sanding wood and painted surfaces and is suitable for smoothing out edges. The product is also ideal for planar grinding of grooves and edges. The abrasive grain is attached using a fully synthetic resin bond, which ensures exceptional durability in tough tasks. The X440 Best for Wood and Paint abrasive belt fits belt sanders.
Package of 3 pieces.

The disc steel brush provides an extra fine surface finish. The disc is equipped with copper-coated, corrugated wire for easy and moderately demanding cleaning tasks on small surfaces. It is ideal for removing heat tint on welds and also suitable for cleaning smaller surfaces in metal or non-ferrous metals, edges or grooves. This disc steel brush is also suitable for removing rust, roughening, matting, texturing and sanding paint on metal and wood. The copper-coated wires on the disc provide protection against corrosion. Brush wires are available in different thicknesses depending on how strong the abrasive effect needs to be. Thicker wires are more aggressive and provide a coarser but faster surface finish while thinner wires provide finer, smoother surface results. It is intended for use with drills with a 6 mm shaft.Disc steel brush - corrugated wire, brass-plated
Optimally suitedfor removal of heat tint on welds.
Suitable foreasy to moderately demanding cleaning tasks on small surfaces,in grooves or edges of metal or non-precious metals such as removal of rust,ruffling,mattering,paint removal,and processing wood.
Advantage:Corrosion protection thanks to brass-plated wire

The cup steel brush provides an excellent, fine surface finish. The brush has wavy wire for light to moderately demanding cleaning tasks. It is suitable for removing coatings and rust and for cleaning formwork boards and cladding. This brush is ideal for use on steel surfaces and is also suitable for roughing, sanding, and paint stripping. The bristles are available in different thicknesses depending on how strong the abrasive effect needs to be. Thicker wires are more aggressive and provide a coarser but faster surface finish, while thinner wires provide finer, smoother surface results. It is intended for use with drills with a 6 mm shaft.
Cup Steel Brush - Wavy Wire
Suitable For Light to moderately demanding cleaning tasks on small to medium-sized metal surfaces such as removing coatings, rust removal, cleaning formwork boards and facades, roughening,sanding,and paint stripping.

It is compatible with hammer drills. The auxiliary handle makes it safe to work with the drill.
Handle for hammer drills

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, and extends the life of the bit. The drill head provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling, and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.

Drill bit, for concrete, masonry, hammer bit, 22 mm, SDS-plus, length: 250 mm

The extension has a 1/4 inch hexagonal shaft and is intended for use with screwdrivers. The hexagonal shaft extension for 1/4-inch Self-Cut Speed flat drills ensures greater range when drilling. The extension comes in two different lengths of 152 mm and 305 mm, and is suitable for all flat drill tasks where greater range is needed.
Extension 1/4" (6.35 mm) hexagonal shaft for Self Cut Speed flat drills

Gatenzaagset, voor plastic, zacht hout, hardhout, polyvinylchloride (PVC), gelamineerd spaanplaat, gelakt hout, 8 stuks

Plunge cut zaagblad, voor veelzijdig gebruik, breedte: 28 mm

Accessoire-adapter, voor hogedrukreiniger

The CYL-9 Ceramic tile drill head is a standard drill head for drilling in tiles. The practical drill head is suitable for dry drilling without cooling. The simple design without notches is particularly suitable for drilling in soft to medium-hard tiles. Drilling without impact function at low speeds. The drill head is compatible with power and battery-powered drills with a cylindrical shaft system. Package of 1 piece.

The HSS spiral drill PointTeQ with a hexagonal shaft provides fast results when drilling in metal. As it is developed for fast drilling, it generates minimal heat with reduced wear on the drill bit, and the PointTeQ tip ensures consistent sharpness and long durability. The self-centering tip prevents wandering and ensures quick and easy starting, and the black oxide channel quickly removes chips. The hexagonal shaft makes the drill very stable with a secure locking between the drill bit and chuck, which strengthens the core of the drill bit and reduces the risk of breakage for bits with a diameter under 6 mm, thereby achieving even greater reliability. This PointTeQ drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. With HSS spiral drills PointTeQ active cutting is achieved along with perfect centering thanks to its two-part tip design. It is type N (drill point) with 135° point angle manufactured according to DIN 338 standards. It is compatible with 1/4 inch hexagonal shank systems for use with impact wrenches , screwdrivers ,and drilling machines .

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 5 pieces.

The drill bit has a hexagonal shaft system and is compatible with all screwdrivers with a 13 mm chuck. The spiral drill bit is suitable for quick and precise drilling when drilling through holes, pre-drilling for rafter nails, and drilling deep dowel holes in wood. The powerful self-feeding tip pulls the bit all the way through, ensuring fast and precise drilling with low power consumption. The optimized low-friction geometry of the bit with solid core ensures straight holes, high chip removal, and higher working speed. The optimized guide edge of the bit and precision-ground head cutting edge produce precise holes. Suitable for use in construction trades, by carpenters and roofers, it is suitable for both softwood and hardwood
Total length 160 mm

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 10 pieces.

This drill bit is compatible with a 1/4 inch hexagonal shaft system for versatile use with screwdrivers, impact wrenches and drilling rigs. The Impact Control HSS spiral drill bit provides extremely robust drilling in metal, especially with screwdrivers. The extremely strong core is extremely robust. The spiral hammer drill bit is precision ground from solid metal and has an oxidized notch that gives it outstanding surface quality for cutting through materials with reduced wear. It is suitable for use on alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, sheet metal and plastic.
Package of 1 piece.

Snelspanboorkop, SDS-plus

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The bit's tapered torsion zone easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks