Bosch - pagina 101 - Kwaliteit tegen concurrerende prijzen

Bosch FORSTNERBOR HM 34MM

This hinge cutter bit is equipped with a cylindrical shaft system and is intended for portable screwdrivers and drill stands. The carbide hinge cutter bit ensures precise results in abrasive materials. The bit's special properties make it the preferred tool of machine carpenters and carpenters, especially in the production of windows, doors, and kitchens. The bit, which is made with carbide cutters with diamond-ground tungsten achieves impressive results. In addition, the centering point guarantees a perfect start to drilling, and the two primary and two secondary side cutters effortlessly cut through materials to achieve extremely precise and splinter-free bottom hole diameters. The bit is particularly suitable for abrasive materials on hard wood, plywood, chipboard, and fiberboard.
Package with 1 piece.

39,65 € (32,77 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch HAMMERBOR SDS-P P3 5X50/110MM

5,65 € (4,67 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch METALBOR HSS-CO s 1X34MM 10 STK

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package of 10 pieces.

10,25 € (8,47 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch METALBOR HSS-CO S 4.5X80MM 10STK

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package with 10 pieces.

18,03 € (14,90 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch METALBOR HSS-G s 13.0X151MM 5STK

Boor, spiraalboor, 13 mm, cilindrisch, lengte: 151 mm (verpakking van 5)

42,02 € (34,73 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch METALBOR HSS-G S 9.5X125MM

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering tip of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral bore head is manufactured according to DIN 338. The bore head is of type N (notch angle) with a 135-degree tip and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the bore head) and is intended for use in drilling stands and screwdrivers.
Package with one piece.

5,51 € (4,55 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch METALBOR HSS-CO S 3.3X65MM 10STK

13,55 € (11,20 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch METALBOR HSS-CO s 3X61MM 10STK

Boor, spiraalboor, 3 mm, cilindrisch, lengte: 61 mm (pak van 10)

12,37 € (10,22 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch METAALBOOR HSS-G 9.2X125MM 5 STUKS

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the borehead has a 135-degree point and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers.
Package with five pieces.

20,39 € (16,85 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch METALBOR HSS-CO s 5.5X93MM 10STK

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package of 10 pieces.

23,10 € (19,09 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch METALBOR POINTTEC HSS-R 4.9MM 10STK

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the shape of the tip with PointTeQ. It is quick and easy to start drilling, as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm since they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (notched angle) with a 135-degree point angle. It has a cylindrical shank system (the same diameter as hammer drills) and is intended for use in drill stands and screwdrivers.
Pack of 10 pieces.

9,50 € (7,85 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch METALBOR HSS-CO s 2X49MM 10STK

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package of 10 pieces.

10,51 € (8,69 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch METALBOR POINTTEC HSS-R 1.4MM 10STK: 0 (This is already in Dutch)

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 10 pieces.

4,76 € (3,93 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch BITSSÆT M1 PH/PZ/T XH QH 25MM 13 STK

27,24 € (22,51 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch BITS R3 XH L:25MM 3 STUK

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks. Drive unit ISO 1173 C6.3, 1/4" external hexagon

5,90 € (4,88 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch METALBOR HSS IMPACT 4.2MM

This drill bit is compatible with a 1/4 inch hexagonal shaft system for versatile use with screwdrivers, impact wrenches and drilling rigs. The Impact Control HSS spiral drill bit provides extremely robust drilling in metal, especially with screwdrivers. The extremely strong core is extremely robust. The spiral hammer drill bit is precision ground from solid metal and has an oxidized notch that gives it outstanding surface quality for cutting through materials with reduced wear. It is suitable for use on alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, sheet metal and plastic.
Package of 1 piece.

5,67 € (4,69 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch BITSSÆT ROBUSTLINE XH PH/PZ/T/SP/QH18STK

24,79 € (20,49 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch BITSSÆT M2 PH/PZ XH QH 25MM 13 STK

27,07 € (22,37 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch FLISEBOR EXPERT 14X90MM GL

Tegelboor met 14.0 mm diameter, 8.0 mm schachtdiameter en 90 mm totale lengte, ontworpen voor steen en tegels, inclusief wandtegels.

Bosch Tile Drill Bit biedt een nauwkeurige pasvorm voor boren in steen- en tegeloppervlakken, met een stevige 8.0 mm schacht en een boor диаметer van 14.0 mm voor consistente resultaten.

10,14 € (8,38 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch FLISEBOR EXPERT 4X70MM GL

Tegelboor van Bosch met 4.0 mm diameter, 3.3 mm schachtdiameter en 70 mm totale lengte voor het boren in steen en tegels.

Bosch Tile Drill Bit is gespecificeerd voor gebruik met steen, wandtegels en tegels en biedt een nauwkeurige boormaat van 4.0 mm in een compacte lengte van 70 mm.

6,93 € (5,73 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch UNIVERSALBORSÆT Ø4-8MM 4 STK

Universele borenset bevat 4 Bosch-boren in 4.0x75, 5.0x85, 6.0x100 en 8.0x120 voor veelzijdig boren in steen, metselwerk, tegels, hout, staal/ijzer en beton, inclusief gewapend beton.

Bosch 4-piece Universal drill bit set is ontworpen om een breed scala aan materialen aan te kunnen—van fijn steengoed en dakpannen tot akoestische panelen en wapeningsstaal—en is daarmee een praktische set voor gemengde boortaken.

11,37 € (9,40 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch HAMMERBOR SDS P-5 10X110MM

The SDS plus-5 drill head guarantees trouble-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling, so the user is not burdened. The drill is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 1 piece.

5,80 € (4,79 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch UNI-HOLDER 75MM 1/4 MAGNET M/SPRINH

Universele houder met 1/4" externe zeskantschacht, totale lengte 75 mm, met een permanente magneet en borgring.

Bosch Universele houder is ontworpen om de bit stevig op zijn plaats te houden met zijn veerring, terwijl de permanente magneet helpt de bit vast te houden voor stabiele hantering tijdens gebruik.

6,30 € (5,21 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch METALBOR HSS-R Ø10X87X133MM

Bosch 2609255020

4,95 € (4,09 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch SAVKRANSSÆT TRÆ 25-68X28MM8STK

Gatenzaagset met 8 diameters (25, 32, 38, 44, 51, 57, 63, 68 mm) voor zagen in hout en geselecteerde kunststoffen.

Bosch 8-delige gatenzaagset ondersteunt werkzaamheden in zachthout, spaanplaat, constructiehout en gelamineerde platen/sandwichpanelen, evenals kunststoffen zoals PP, PE, isolatiemateriaal en acrylglas (PM).

13,69 € (11,31 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Maandag - Donderdag:	09:00 - 12:00
Vrijdag:	09:00 - 12:00
Weekend en Deense feestdagen:	Gesloten

Telefoon:	085 301 55 55
Email particulier:	[email protected]
Email zakelijk:	[email protected]