Bosch - pagina 100 - Kwaliteit tegen concurrerende prijzen

Bosch SLIBEBL PLAN93X186 8H BFWP K40-180 10STK

C430 Expert for Wood and Paint has an impressively long lifespan when sanding wood, veneer, and solid surfaces. In addition, the electrostatic, open surface with spaces between the grains ensures uniform sanding and prevents clogging. The strong abrasive grains are resistant to wear, allowing for prolonged and repeated use. This product is intended for cleaning up and sanding paint, varnish, putty, primer and wood-based materials; it is suitable for intermediate sanding of lacquer on surfaces. It is also suitable for sanding after wetting certain materials as well as smoothing out feather edges. The fully synthetic resin-bonded grains provide a long lifespan. The extremely flexible C-/B- paper backing allows the product to be folded without cracking forming. Sandpaper C430 Expert for Wood and Paint fits orbital sanders.
Package of 10 pieces.

10,18 € (8,41 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch STÅLKOPBØRSTE 50MM NYLON

The cup nylon brush provides a good, fine finish on various materials without damaging the surface. It is equipped with K80 aluminum oxide-coated nylon bristles that perfectly conform to the contours of the object. The abrasive coating continuously releases abrasive grains during use, ensuring consistent material removal. This cup nylon brush is suitable for cleaning tasks such as removing rust from small to medium-sized metal surfaces. It is also suitable for sanding paint, smoothing, matte sanding and cleaning metal, PVC and wood. It can also be used for texturing wood. The brush wires are available in different thicknesses depending on how strong the abrasive effect needs to be. Thicker wires are more aggressive and provide a coarser but faster surface finish while thinner wires provide finer, smoother surface results. It is designed for use with drills with a 6 mm shaft.
Cup steel brush - nylon wire with corundum abrasive K80
Suitable for removing paint, removing rust, smoothing out surfaces and cleaning wood, metal and PVC on smaller to medium-sized areas; texturing wood.
Perfectly adapts to the outline of the object without significantly changing its surface.
Works with constant breakdown effect as abrasives are constantly released during use.

14,14 € (11,69 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch STIKSAVKLINGE T 101 AOF BIM 5 STK

For use with jigsaws with T-shank attachment systems. The T 101 AOF Clean for Hard Wood jigsaw blade provides clean, curved cuts in wood. Its precision-ground teeth with toothed construction allow for clean cuts. In addition, its narrow blade is optimized for curved cuts. It is made of BIM (bimetal), and its fully hardened HSS (high-speed steel) tooth list is attached to a high-elastic HCS (carbon-rich steel) construction, making the blade suitable for cutting hard materials such as laminate flooring. Additionally, a pointed-tooth design reduces wear and tear. It features a very fine tooth height (1.4 mm) for cutting very thin slices in woodworking materials with a thickness of 1.5-15 mm.
T 101 AOF
BIM, pointed-toothed, precision-ground and toothed
Hardwood, laminates (1.5-15 mm), laminated boards/HPLs, plywood; especially designed for curved cuts without tearing

19,09 € (15,78 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch BAJONETSAVKLINGE m 1131 L TRÆ T/PFZ 500

M 1131 L
HCS, gelegd, geslepen, zeer scherpe tanden
Grof hout, brandhout, takjes, takken, tuinieren.

13,81 € (11,41 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch BAJONETSAVKL S628DF BIM PLASTER 2 STK

This jigsaw blade is ideal for use with compact battery-powered saws and features a universal shank of 0.5". The S 628 DF Special for Plaster jigsaw blade provides clean curved and plunge cuts in special materials. Its pointed teeth provide chip-free results, while its fully tapered shape makes it easy to reach difficult areas and allows for curved cuts. In addition, the blade's pointed end makes it suitable for plunge cutting. The blade is made of BIM (bimetal), and its fully hardened HSS (h...

12,04 € (9,95 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch SAVKLINGE Metaal M3456XF T/PFZ 500

M 3456 XF
BIM, gelegd, gefreesd
Hout met spijkers/metaal, hout/spaanplaat (10-150 mm), metalen platen, buizen, profielen (5-18 mm); kunststoffen: buizen, profielen (Ø10-150 mm)

18,61 € (15,38 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch BAJONETSAVKL S511DF FLEX WOOD&METAL 2STK

It has a universal shank of 0.5". The S 511 DF Flexible for Wood and Metal bayonet saw blade provides fast cuts in wood and metal. The large tooth height (4.3 mm) and set tooth design ensure quick cuts. Additionally, the BIM blade (bimetal) is optimized to cut through soft nails, soft steel materials, and iron-free metal components embedded in wood. Its short length (100 mm) provides a cutting capacity of up to 50 mm, making it ideal for use with compact cordless saws.S 511 DF
BIM, set teeth, milled
Specially optimized for use in compact saws.
Wood with nails/metal, wood, chipboard, plastic pipes and profiles,fiberglass-reinforced materials/epoxy.

9,84 € (8,13 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch hcs plunge cut saw Blade aiz 32 epc Hout 50 x 32 mm (blister pk 5 pcs)

Plunge cut zaagblad, voor hout, breedte: 32 mm (pak van 5)

45,23 € (37,38 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch FORSÆNKER 3X16MM

The holder-mounted countersink drill, countersinks and edge mills effectively in a single step in wood. The countersink is mounted on a dowel drilling head, solves all three tasks in an inexpensive and efficient way, and guarantees impressive results. The countersink is suitable for hard and soft wood, laminated and non-laminated chipboards and plywood. This multifunctional bit, made of tool steel, has a 90-degree chamfer angle, five cutting edges, and can also be used as a depth stop. Comes with hex key; dowel drilling head not included. The countersink is intended for drill stands and screwdrivers.

13,47 € (11,13 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch TRINBOR M10-M40 HSS-ALTIN

The drill head for step drilling is made of HSS (high-speed steel) and coated with AlTiN (aluminum titanium nitride). This provides the longest possible lifespan and does not require the use of coolant. Laser-marked numbers on both flutes provide highly visible and durable marking of the hole diameter. Additionally, the 3-flat shank prevents slipping in the drill chuck and provides efficient transmission with high torque. The HSS step drill head delivers smooth, burr-free drilling in multiple diameters with a single tool. It is ideal for deburring, drilling round holes, and enlarging existing ones. Center punch marks are not necessary because the split point design allows for easy starting. Its CNC-ground flute enables optimized chip removal and less vibration for smoother drilling. The most optimal cutting edge geometry and absolute smoothness are ensured thanks to axial and radial relief grinding.This step drill head is suitable for use on thin materials such as non-ferrous metals, sheet plastic, sheet steel, plastic, and stainless steel.Threaded core holes for cable glands:Ø 6-8.5-10.5-14.5-18.-23.-30.-38.mm;M10x1 .5-M12x1 .5-M16x1 .5-M20x1 .5-M25x1 .5-M32x1 .5-M40 x 1 , 50Through-holes for cable glands:Ø6 -10 , 512 ,516 -20 ,525 -28 -32 ,535 -40 mm;M10 x 15 M12 x15 M16 x15 M20 x15 M25 xlS M32xlS MOxlS

175,10 € (144,71 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch SLIBEBLAD DELTA EW 32MM K40 5STK

C430 Expert for Wood and Paint has an impressively long lifespan when sanding wood, veneer, and solid surfaces. In addition, the electrostatic, open surface with spaces between the grains ensures uniform sanding and prevents clogging. The strong abrasive grains are resistant to wear, allowing for prolonged and repeated use. This product is intended for cleaning up and sanding paint, varnish, putty, primer and wood-based materials; it is suitable for intermediate sanding of lacquer on surfaces. It is also suitable for sanding after wetting certain materials as well as smoothing out feather edges. The fully synthetic resin-bonded grains provide a long lifespan. The extremely flexible C-/B-paper backing allows the product to be folded without cracking forming. Sandpaper C430 Expert for Wood and Paint fits triangular sanders.
Package of 5 pieces.

7,21 € (5,96 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch SLIBEBLAD DELTA EW 32MM K60 5STK

C430 Expert for Wood and Paint has an impressively long lifespan when sanding wood, veneer, and solid surfaces. In addition, the electrostatic, open surface with spaces between the grains ensures uniform sanding and prevents clogging. The strong abrasive grains are resistant to wear, allowing for prolonged and repeated use. This product is intended for cleaning up and sanding paint, varnish, putty, primer and wood-based materials; it is suitable for intermediate sanding of lacquer on surfaces. It is also suitable for sanding after wetting certain materials as well as smoothing out feather edges. The fully synthetic resin-bonded grains provide a long lifespan. The extremely flexible C-/B-paper backing allows the product to be folded without cracking forming. Sandpaper C430 Expert for Wood and Paint fits triangular sanders.
Package of 5 pieces.

7,21 € (5,96 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch SLIBEBL MULTI EW 100X170MM K80 5STK

C430 Expert for Wood and Paint has an impressively long lifespan when sanding wood, veneer, and solid surfaces. In addition, the electrostatic, open surface with spaces between the grains ensures uniform sanding and prevents clogging. The strong abrasive grains are resistant to wear, allowing for prolonged and repeated use. This product is intended for cleaning up and sanding paint, varnish, putty, primer and wood-based materials; it is suitable for intermediate sanding of lacquer on surfaces. It is also suitable for sanding after wetting certain materials as well as smoothing out feather edges. The fully synthetic resin-bonded grains provide a long lifespan. The extremely flexible C-/B- paper backing allows the product to be folded without cracking forming. Sandpaper C430 Expert for Wood and Paint fits multi-sanders.
Package of 5 pieces.

7,95 € (6,57 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch SLIBEBLAD 80X133MM K180 10 STK

C430 Expert for Wood and Paint has an impressive long lifespan when sanding in wood, veneer, and solid surfaces. In addition, the electrostatic, open surface with spaces between the grains ensures uniform sanding and prevents clogging. The strong abrasive grains are resistant to wear, allowing for prolonged and repeated use. This product is intended for cleaning up and sanding paint, varnish, putty, primer and wood-based materials; it is suitable for intermediate sanding of lacquer on surfaces. It is also suitable for sanding after wetting certain materials as well as smoothing out feather edges. The fully synthetic resin-bonded grains provide a long lifespan. The extremely flexible C-/B- paper backing allows the product to be folded without cracking forming. Sandpaper C430 Expert for Wood and Paint fits orbital sanders.
Package of 10 pieces.

8,69 € (7,18 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch Schuurpapierblad 80x133mm K240 10 stuks

C430 Expert for Wood and Paint has an impressively long lifespan when sanding wood, veneer, and solid surfaces. In addition, the electrostatic, open surface with spaces between the grains ensures uniform sanding and prevents clogging. The strong abrasive grains are resistant to wear, allowing for prolonged and repeated use. This product is intended for cleaning up and sanding paint, varnish, putty, primer, and wood-based materials; it is suitable for intermediate sanding of lacquer on surfaces. It is also suitable for sanding after wetting certain materials as well as smoothing out feather edges. The fully synthetic resin-bonded grains provide a long lifespan. The extremely flexible C-/B-paper backing allows the product to be folded without cracking forming. Sandpaper C430 Expert for Wood and Paint fits orbital sanders.
Package of 10 pieces.

8,69 € (7,18 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch SLIBEBLAD RW 115X280MM K180 10 STK

C430 Expert for Wood and Paint has an impressive long lifespan when sanding in wood, veneer, and solid surfaces. In addition, the electrostatic, open surface with spaces between the grains ensures uniform sanding and prevents clogging. The strong abrasive grains are resistant to wear, allowing for prolonged and repeated use. This product is intended for cleaning up and sanding paint, varnish, putty, primer and wood-based materials; it is suitable for intermediate sanding of lacquer on surfaces. It is also suitable for sanding after wetting certain materials as well as smoothing out feather edges. The fully synthetic resin-bonded grains provide a long lifespan. The extremely flexible C-/B- paper backing allows the product to be folded without cracking forming. Sandpaper C430 Expert for Wood and Paint fits orbital sanders.
Package of 10 pieces.

11,24 € (9,29 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch SLIBEBLAD 115X280MM K40 10 STK

C430 Expert for Wood and Paint has an impressive long lifespan when sanding in wood, veneer, and solid surfaces. In addition, the electrostatic, open surface with spaces between the grains ensures uniform sanding and prevents clogging. The strong abrasive grains are resistant to wear, allowing for prolonged and repeated use. This product is intended for cleaning up and sanding paint, varnish, putty, primer and wood-based materials; it is suitable for intermediate sanding of lacquer on surfaces. It is also suitable for sanding after wetting certain materials as well as smoothing out feather edges. The fully synthetic resin-bonded grains provide a long lifespan. The extremely flexible C-/B- paper backing allows the product to be folded without cracking forming. Sandpaper C430 Expert for Wood and Paint fits orbital sanders.
Package of 10 pieces.

11,24 € (9,29 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch ADAPTER FOR HANDHELD ROUTERS

The adapter is an accessory for connecting vacuum cleaner hoses to routers

7,24 € (5,98 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch Schuurpapierblad 80x133mm K120 10 stuks

C430 Expert for Wood and Paint has an impressively long lifespan when sanding wood, veneer, and solid surfaces. In addition, the electrostatic, open surface with spaces between the grains ensures uniform sanding and prevents clogging. The strong abrasive grains are resistant to wear, allowing for prolonged and repeated use. This product is intended for cleaning up and sanding paint, varnish, putty, primer, and wood-based materials; it is suitable for intermediate sanding of lacquer on surfaces. It is also suitable for sanding after wetting certain materials as well as smoothing out feather edges. The fully synthetic resin-bonded grains provide a long lifespan. The extremely flexible C-/B-paper backing allows the product to be folded without cracking forming. Sandpaper C430 Expert for Wood and Paint fits orbital sanders.
Package of 10 pieces.

8,69 € (7,18 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch HAMMERBOR SDS-P P3 8X150/210MM

6,69 € (5,53 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch DIAMANTBOR VÅD 37X400MM 1/2T BEST C

158,43 € (130,93 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch HAMMERBOR SDS-P P3 12X100/160MM

The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders for rotary hammers.
Package contains 1 piece.

5,41 € (4,47 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch HAMMERBOR SDS-P P3 8X50/110MM

The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders for rotary hammers.
Package contains 1 piece.

5,84 € (4,83 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch BETONBOR CYL5 5X150MM

The CYL-5 drill bit head guarantees extra long lifespan when drilling in concrete and stone. The Bosch-developed carbide material combined with diamond-ground cutting edges provides an extremely durable drill bit head. The variable design with 2 flutes and short, variable pitch significantly reduces flute friction and ensures efficient dust removal and less wear. The Bosch Power Grip shank system enables 100% power transmission from the machine to the drill bit head, so that the power is optimally utilized directly for the drilling task, and reduced power loss means less wear. For drilling fixing holes in concrete, natural stone, and artificial stone material. The drill bit head is PGM-certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, accurate boreholes, and effective fastening. The drill bit head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package of 1 piece.

7,27 € (6,01 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Bosch HAMMERBOR SDS-P P3 6X200/260MM

The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders.
Package of 1 piece.

7,51 € (6,21 €)

Extern magazijn, 7 - 8 werkdagen levertijd

Maandag - Donderdag:	09:00 - 12:00
Vrijdag:	09:00 - 12:00
Weekend en Deense feestdagen:	Gesloten

Telefoon:	085 301 55 55
Email particulier:	[email protected]
Email zakelijk:	[email protected]