Boren en bits - pagina 33

Diameter mm
20.0
Shaft diameter mm
Total length mm
90

Diamantboor, voor beton, 8 mm, lengte: 100 mm

Drill bit, for concrete, bricks, sandstone, 10 mm, SDS-plus, length: 165 mm

Boor, voor metaal, spiraalboor, 13 mm, lengte: 151 mm

This drill head is compatible with a 1/4 inch hexagonal shaft system for versatile use with screwdrivers, impact wrenches, and drill stands. The Impact Control HSS spiral bit provides extremely robust drilling in metal, especially with screwdrivers. The extremely strong core is extremely robust. The spiral hammer bit is precision ground from solid metal and has an oxidized notch that gives it outstanding surface quality for cutting through materials with reduced wear. It is suitable for use on alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, sheet metal and plastic.
Package of 1 piece.

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, and extends the life of the bit. The drill head provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling, and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, extending the life of the bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.

Boorstift, voor soft tile, hard tile, 7 mm, lengte: 90 mm

Boorstift, voor beton, versterkt beton, hamerboor, 26 mm, SDS-plus, lengte: 520 mm

Boorstift, voor beton, plastic, staal, zachthout, soft tile, multimaterial, 5.5 mm, cilindrisch, lengte: 150 mm

Boorstiftset, voor beton, metselwerk, bakstenen, 5 stuks, 5 mm, 6 mm, 8 mm, 10 mm, 12 mm, SDS-plus, lengte: 160 mm, 110 mm

Boorstift, voor spaanplaat, zachthout, spaanplaat, speedboor, 10 mm, zeskant, lengte: 152 mm

De box maakt deel uit van het Bosch Pick and Click systeem, dat op maat gemaakte accessoiresets mogelijk maakt. Het kliksysteem maakt het eenvoudig om bits en boren te verwisselen en zo een op maat gemaakte set samen te stellen. Empty Case L is een opbergbox voor op maat gemaakte accessoiresets. De koffer heeft sleuven voor bevestiging, waardoor de bitset en de boor gemakkelijk kunnen worden vastgeklikt, waardoor de set zeer veelzijdig is. De Pick and Click box zonder inhoud (maat L) heeft twee zijden voor het opbergen van bits en boren. Hij is ook voorzien van rubberen randen die de bescherming en robuustheid in ruwe omgevingen verhogen.
Pick and Click box zonder inhoud (maat L)
Kan worden aangepast met bitpakketten

Doosboor, voor beton, metselwerk, kalksteen, 82 mm, SDS-max

Doosboor, voor beton, metselwerk, kalksteen, 68 mm

Doosboor, voor beton, metselwerk, kalksteen, 45 mm, SDS-max

Doosboor, voor beton, metselwerk, kalksteen, 90 mm, SDS-max

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 10 pieces.

Bahco 7805DM-18 krachtdop

Beitel, voor beton, metselwerk, plat, SDS-plus, lengte: 250 mm, breedte: 20 mm, voor Makita DHR243RTJ, HK0500; XGT HR008GM202

Boorstift, voor hout, triplex, zachthout, hardhout, gefineerd hout, houtboor, 12 mm, cilindrisch, lengte: 155 mm, voor Makita DHP482RTJ

Makita E-19831 krachtdop

The keyless chuck is very easy to use and ensures convenient operation. Easy and quick attachment with one hand without the use of a key and secure operation with cylindrical or hexagonal shank drills. Chucks with 1 sleeve are available with different holders (1/2" - 20 and 3/8" - 24) and are compatible with most common spindle lock drills. See the technical information for more information on impact resistance or suitability for counterclockwise rotation

Wera 05160821001 schroevendraaierbit

Doosboor, voor beton, 122 mm