Boren en bits - pagina 32

Bahco 3833-38-C gatenzaag

Bahco 3834-DRL-ES boorkopverlengstuk

Screwdriver bit set, 12 pieces, torx, phillips, pozidriv, six-point, length: 25 mm

Boorstift, voor beton, versterkt beton, hamerboor, 12 mm, SDS-plus, lengte: 315 mm

Gatenzaag, voor plastic, bakstenen, soft tile, stainless steel sheets, wood with metal, 68 mm, zeskant

Boor, voor metaal, spiraalboor, 2 stuks, 1.5 mm, lengte: 40 mm

Boor, spiraalboor, 3.5 mm, cilindrisch, lengte: 70 mm

Boor, voor beton, steen, 5 mm, lengte: 100 mm

Boorstift, voor spaanplaat, zachthout, spaanplaat, speedboor, 36 mm, zeskant, lengte: 152 mm

Boorstift, voor beton, plastic, staal, zachthout, soft tile, multimaterial, 11 mm, cilindrisch, lengte: 150 mm

Boorstift, voor beton, metselwerk, versterkt beton, 16 mm, SDS-max, lengte: 340 mm

Boorstift, voor spaanplaat, zachthout, spaanplaat, speedboor, 19 mm, zeskant, lengte: 400 mm

Nemesis II drill bit set for drilling in concrete, Set includes 5x115, 6x115, 6x165, 8x115, 8x165, 10x165 and 12x165 mm bits.

HSS GS drill bit for use in metal. The bit tip has a 135 degree split point to reduce side slipping when starting to drill. 57 mm working length and 93 mm total length, with a diameter of 6 mm.

Schroefbit, 2 stuks, pozidriv, PZ2, zeskant, lengte: 65 mm

Boor, voor beton, metselwerk, 10 mm, SDS-plus, lengte: 215 mm

This drill head is compatible with a 1/4 inch hexagonal shaft system for versatile use with screwdrivers, impact wrenches, and drill stands. The Impact Control HSS spiral bit provides extremely robust drilling in metal, especially with screwdrivers. The extremely strong core is extremely robust. The spiral hammer bit is precision ground from solid metal and has an oxidized notch that gives it outstanding surface quality for cutting through materials with reduced wear. It is suitable for use on alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, sheet metal and plastic.
Package of 1 piece.

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) has a 135-degree point and a diameter tolerance of h8. It has a cylindrical shank system (the shank has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers.
Package with two pieces.

Boor, voor beton, metselwerk, steen, 6 mm, cilindrisch, lengte: 100 mm

Boor, voor beton, metselwerk, gewapend beton, 8 mm, SDS-plus, lengte: 115 mm

Boor, spiraalboor, 10 mm, cilindrisch, lengte: 400 mm

Boor, voor beton, metselwerk, hamerboor, 6 mm, SDS-plus, lengte: 265 mm

The SDS plus-5 drill bit guarantees trouble-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling work, so the user is not burdened. The drill is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 1 piece.

Boor, voor beton, metselwerk, gewapend beton, 6 mm, SDS-plus, lengte: 215 mm

It has a 1/4 inch hex shank for use with common battery-powered screwdrivers and impact wrenches with a 1/4 inch tool holder. The magnetic universal holder, standard, is a good choice for universal applications of screwdrivers. The product's slim design makes it easy to handle for various tasks. A permanent magnet ensures a firm and secure grip on the bits during use. The universal holder is suitable for all fastening jobs that require power tools. It has an external hexagonal shank of 1/4 inch and is intended for use with screwdrivers, screw machines, and drywall screwdrivers with depth stops.
Universal holder with permanent magnet, without spring ring