Boren en bits - pagina 19

Houtboorset, 3-delig, met cilindrische schachten en drie diameters voor werken in een breed scala aan houtachtige materialen.

Houtschachtset, 3-delig bevat boren met diameters 15.0–6.0 mm, 15.0 mm en 15.0 mm, elk met 6 mm schachtdiameter en totale lengtes van 65 mm, 60 mm en 48 mm, geschikt voor materialen zoals massief hardhout, zachthout, multiplex, spaanplaat, MDF, HDF, multiplexplaat en gelamineerd hout.

Boor, voor plastic, non-ferrometaal, gietijzer, gegoten staal, gelegeerd staal, ongelegeerd staal, spiraalboor van 14 mm diameter en cilindrische vorm met een lengte van 160 mm

Boor, voor beton, metselwerk, kalksteen, steen, kunststeen, 8 mm diameter en 120 mm lengte

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the borehead has a 135-degree point and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers.
Package with one piece.

Routerbit, voor hout, Kerngatfrees, 12 mm, lengte: 40 mm

The adapter is intended for Bosch hammer drills. The self-tightening drill chuck with adapter is a Bosch system drill chuck and is easy to mount and dismount without the use of tools. Designed to easily clamp drills with a diameter of 1.5 to 13 mm and does not require a key. Self-tightening drill chuck with adapter

Routerbit, Recht, 11 mm, lengte: 51 mm

Hamerboor SDS plus met 12 mm diameter, 400 mm werklengte en 460 mm totale lengte voor boren in steen, metselwerk, graniet, beton en gewapend beton.

Hamerboor SDS plus is gespecificeerd voor SDS plus-hamerboren en vermeld voor gebruik in gangbare harde bouwmaterialen, met duidelijke maatvoering voor nauwkeurige boorkeuze.

Verstelbare platte boor biedt een boorbereik van 15.0–45.0 mm, 8 mm schacht, en is ontworpen voor gebruik met een boormachine.

Bosch Verstelbare platte boor wordt geleverd als 1 stuk en is geschikt voor middelhard hout en zachthout, met een werklengte van 9 cm voor gecontroleerd boren.

Diameter mm: 10.0Shaft diameter mm: 8Total length mm: 90
Wood|SoftwoodWood|Acoustic panels

Metaalborenset bevat 5 HSS high-speed steel-boren met een 6.35 mm zeskantschacht voor gebruik met een boormachine, geleverd in een draagkoffer.

Bosch Metaalborenset, 5-delig, HSS-G met zeskantschacht omvat boormaten 2, 3, 4, 5 en 6 mm en is geschikt voor ijzer en metaal, plaatmetaal en hard kunststof.

3mm diameter wood twist drill with countersink and a working length of 30mm

Boorset, voor beton, metselwerk, kalksteen, steen, kunststeen, 7 stuks: 5 mm, 6 mm, 7 mm, 8 mm ,10mm en 4mm. Lengte:75mm ,85mm ,100mm en120mm

Routerbit, voor hout, afronding, 18.7 mm, lengte: 55 mm

The SDS plus-5 drill head guarantees trouble-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling, so the user is not burdened. The drill is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 1 piece.

Boorset, voor metaal, spiraalboor, 10 stuks

Boorset voor metaal, 13 stuks

Boor, voor beton, metselwerk, gewapend beton, 6 mm, SDS-plus, lengte: 215 mm

The pointed chisel provides sustained high speed for material removal thanks to the self-sharpening function. The special star shape at the working end preserves the accessory's shape and thus prevents work interruptions. The chisel is intended for use in concrete and brick for grooving and demolition work, including renovation of joints and clearing of reinforcements. The self-sharpening pointed chisel provides a 30% higher speed for material removal compared to standard pointed chisels. It is compatible with a 28 mm hexagonal shaft system for rotary hammers.Self-sharpening pointed chisel
Pointed chisel that ensures a constant high speed for material removal

Snelspanboorhouder, 1-10 mm, zeskant

Bosch SDS-Quick Multi-purpose Drill Bit

It has an SDS plus shaft and is designed for all hammer drills with SDS plus fittings. The universal holder with quick release makes it easy to change bits and holds the bit extra securely during universal use of screwdrivers. A permanent magnet ensures a firm and secure grip on the bits during use. In addition, a quick release function on the drill chuck allows for quick and easy bit changes, increasing the firm grip on the bit. The universal holder is suitable for all fastening jobs that require power tools.Universal holder
with quick-change chuck and permanent magnet