Boren en bits - pagina 18

Bahco 6962 moersleutel adapter & extensie

Impact screwdriver bit, 2 stuks, torx, T40, zeskant, lengte: 50 mm

IRWIN 10502853 boor Getrapte boor

Impact screwdriver bit set, 10 pieces, torx, phillips, pozidriv, hex, length: 50 mm

Schroefbit, 3 stuks, torx, T30, zeskant, lengte: 50 mm

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the bit has a 135-degree point and a diameter tolerance of h8. It has a cylindrical shank system (the shank has the same diameter as the bit) and is intended for use in drilling stands and screwdrivers.
Package with one piece.

Wera 05066465001 niet gecategoriseerd

Bahco 59/S54BC-IP schroevendraaierbit

Schroefbit, 3 stuks, phillips, PH2, zeskant, lengte: 157 mm

Boor, spiraalboor, 12 mm, cilindrisch, lengte: 151 mm

Beitel, voor tegels, SDS-plus, lengte: 260 mm

Bit socket, met zes punten, 8 mm, zeskant, lengte: 65 mm

Boorstift, voor metaal, 5 mm, lengte: 86 mm

Bahco ‎BAH383370C gatenzaag Boor 1 stuk(s)

HSS GS drill bit for use in metal. The bit tip has a 135 degree split point to reduce side slipping when starting to drill. 57 mm working length and 93 mm total length, with a diameter of 6 mm.

Boorstift, spiraalboor, 4 mm, zeskant, lengte: 95 mm, voor Makita DHP482RTJ

Makita B-49127 boor Boorkop voor metselwerk 10 stuk(s)

Boorstift, voor beton, metselwerk, steen, engineering brick, hamerboor, 6 mm, SDS-plus, lengte: 165 mm, voor XGT HR008GM202

The CYL-5 drill bit head guarantees extra long lifespan when drilling in concrete and stone. The carbide material developed by Bosch, combined with diamond-ground cutting edges, provides an extremely durable drill bit head. The variable design with 2 flutes and a short, variable pitch significantly reduces flute friction and ensures effective dust removal and less wear. The Bosch Power Grip shank system enables 100% power transfer from the machine to the drill bit head. This means that the power is optimally utilized directly for drilling tasks, and reduced power loss results in less wear. For drilling fixing holes in concrete, natural stone, and artificial stone materials. The drill bit head is PGM certified by the PGM Masonry Drill Bit Association Board guaranteeing tight tolerances, accurate boreholes, and efficient fastening. The drill bit head is compatible with cylindrical shank systems for all powered or battery-powered hammer drills.
Package of 1 piece.

Drill bit, twist bit, 8.5 mm, cylindrical, length: 117 mm

Boorset voor metselwerk, 7 stuks

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and power drills. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw installation, making it suitable for all tasks. Drive unit ISO 1173 C6.3, 1/4" external hexagon

Boor, spiraalboor, 3 mm, cilindrisch, lengte: 61 mm (pak van 2)

The dowel drill bit with a countersink effectively drills, countersinks, and chamfers in one step in wood. Mounted on a dowel drilling head, it solves all three tasks cheaply and efficiently. The countersink is suitable for hard and soft wood, laminated and non-laminated chipboards, and plywood. This multifunctional bit made of tool steel has a 90-degree countersinking angle, five cutting edges, and can also be used as a depth stop. The countersink comes with a hex key, dowel drilling head, and holder-mounted countersink. The countersink is intended for drill stands and screwdrivers.

Boorbitset voor metaal bevat 19 high-speed steel (HSS) HSS-R boorbits in een duurzame metalen koffer, met maten van 1 mm tot 10 mm.

Bosch HSS-R set met metaalboren, 19 stuks is ontworpen voor metaalboren en biedt een brede selectie diameters—1 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm, 7.5 mm, 8 mm, 8.5 mm, 9 mm, 9.5 mm en 10 mm—netjes georganiseerd in een metalen koffer.