Bosch Boren en bits - pagina 3

Centreerboor, voor metaal, aluminium, roestvrij staal, polyvinylchloride (PVC), 7.15 mm, zeskant, lengte: 120 mm

Bosch 2 609 255 206 boor 1 stuk(s)

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 10 pieces.

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Package contains 2 pieces.

Hogesnelheidsfrees, voor zachthout, hardhout, speedboor, plat, 6 stuks, 25 mm, 13 mm, 20 mm, 16 mm, 22 mm, 19 mm, zeskant

Schroevendraaier met bitset, 46 stuks, in koffer

Chuck key, 6 mm, length: 110 mm

The reserve key fits toothed chuck drill chucks. It is important to choose the correct key type (A/B/C/D/F/G)

SDS plus pointed chisel 250 mm
SDS plus flat chisel 250 mm
SDS plus-1 hammer drill bit 5 x 50 x 110 mm
SDS plus-1 hammer drill bit 6 x 50 x 110 mm
SDS plus-1 hammer drill bit 6 x100x160mm
SDS Plus -1 Hammer Drill Bit,7x50x110mm
SDS Plus -1 Hammer Drill Bit,7x100x160mm
SDS Plus -1 Hammer Drill Bit,8x50x110mm
SDS Plus -1 Hammer Drill Bit,8X100X160MM
SDS PLUS-1 HAMMER DRILL BIT ,10 X100X160MM
SDS PLUS-1 HAMMER DRILL BIT ,12 X100X160MM

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and power drills. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hardness quality, and enables sufficient performance in all tasks. The pointed torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw installation, making it suitable for all tasks

Boorstift, hamerboor, 12 mm, SDS-plus, lengte: 165 mm

Boorstift, hamerboor, 8 mm, SDS-plus, lengte: 215 mm

Schroevendraaier bit, 3 stuks, torx, T10, hexagonaal, lengte: 25 mm

Socketset

Boorset voor hout, 8 stuks

Bosch 2609255030 Drill bit set 10 pc(s)

Schroevendraaier bit, torx, T20, hex, lengte: 89 mm

Boorstift, voor versterkt beton, graniet, gehard beton, gneis, armed concrete, hamerboor, 6 mm, SDS-plus, lengte: 115 mm

De Impact Control-schroevendraaierbit is zeer robuust en geschikt voor veeleisende taken en is zelfs bestand tegen het hoge vermogen van slagmoersleutels. De bit heeft een uitgebreide torsiezone die hem uiterst robuust maakt voor langdurig werk. Gemodificeerd S2-staal en een geoptimaliseerd warmtebehandelingsproces zorgen voor extra duurzaamheid voor hoge prestaties in fabrieksinstallaties of zware industriële werkzaamheden. De 36-delige Pick and Click Schroevendraaierbits met Impact Control set bevat ook topsleutels en de Impact Control Universele Houder Standaard Magnetisch en Impact Control Universele Houder Snel Los. Deze houders zorgen voor een extra stevige grip op de bit bij het installeren van schroeven voor elektrisch gereedschap, terwijl de Quick Release-functie een snelle en eenvoudige wisseling mogelijk maakt. De schroefbit maakt deel uit van het Bosch Pick and Click-systeem, dat op maat gemaakte accessoiresets mogelijk maakt. Het Click-systeem maakt het eenvoudig om bits en boren te verwisselen en zo een op maat gemaakte set samen te stellen. De bit wordt geleverd in een plastic houder die eenvoudig in Pick and Click dozen zonder inhoud (maten M en L) kan worden geklikt voor op maat gemaakte bitsets. Het heeft een externe 1/4-inch zeskantschacht voor gebruik met schroevendraaiers, schroevendraaiers en vooral slagmoersleutels.
Set van 8 (index)

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and power drills. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw installation, making it suitable for all tasks. Drive unit ISO 1173 C6.3, 1/4" external hexagon

Schroefbit, voor roestvrij staal, zachthout, 1/4", phillips, PH2, zeskant, lengte: 152 mm

Schroevendraaier bit, 3 stuks, torx, T15, hexagonaal, lengte: 25 mm

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks. Drive unit ISO 1173 C6.3, 1/4" external hexagon

2 x Bosch professionele schroevendraaierbits T10 inzetbit - lengte 25 mm, zeshoekige schacht.