Bosch Boren en bits - pagina 2

Magnetic Impact Control universal holder, standard, is a good choice for universal use of screwdrivers. The product's slim design makes it easy to handle for various tasks. A permanent magnet ensures a firm and secure grip on the bits during use. The universal holder is suitable for all fastening jobs that require power tools. The holder is part of the Bosch Pick and Click system, which allows for customized sets. The click-fitting system makes it easy to change bits and drills and thus get an individually tailored set. It has a 1/4 inch hexagonal shaft for use with common battery-powered screwdrivers and impact wrenches with a 1/4 inch tool holder.Universal holderwith permanent magnet

Boorstiftset, voor versterkt beton, graniet, doorgedroogd beton, gneis, 3 stuks, 6 mm, 8 mm, 10 mm, SDS-plus, lengte: 165 mm

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the borehead has a 135-degree point and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers.
Package with one piece.

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, extending the life of the bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.

Schroevendraaier, boor en dopsleutelset, voor hout, metaal, metselwerk, 70 stuks, torx, phillips, pozidriv, hexagonaal (zeskant), sleufkop (platte kop), 5 mm , 6 mm , 7 mm , 8 mm , 9 mm ,10mm ,4mm lengte:50mm en25mm

Boor, voor zacht hout, hardhout, puntboor, 7 stuks

Boorset voor hout, 8 stuks

The box is part of the Bosch Pick and Click system, which enables customized accessory sets. The click-fitting system makes it easy to change bits and drills, thus creating an individually tailored set. Empty Case M is a storage box for individually tailored accessory sets. The box has slots for attachment, making it easy to click in bit sets and drills, which makes the set very versatile. The Pick and Click box without content (size M) has one side for storing bits and a window so you can see the contents. It is also equipped with rubber edges that increase protection and robustness in tough environments.Pick and Click Box without content (size M)Can be customized with bit packs

Boor, voor metaal, spiraalboor, 6.5 mm, lengte: 101 mm

Freesbit, voor hout, zachthout, hardhout, 15 stuks

Bosch Betonboren SDS-Quick

Schroevendraaier bit set, 32 stuks, torx, phillips, pozidriv, hex, slot, torq-set, lengte: 25 mm

Impact Control Universal Holder Quick Release makes it easy to change bits and securely holds the bit during universal use of screwdrivers. A permanent magnet ensures a firm and secure grip on the bits during use. In addition, a Quick Release function on the clamping chuck allows for quick and easy bit changes while increasing the firm grip on the bit. The universal holder is suitable for all fastening jobs that require power tools. The holder is part of Bosch's Pick and Click system, which enables customized sets. The Click-fitting system makes it easy to change bits and drills, thus creating an individually tailored set. It has a 1/4 inch hexagonal shaft for use with common battery-powered screwdrivers and impact wrenches with a tool holder of 1/4 inch.Universal holderwith quick-release chuck and permanent magnet

Het smeermiddel zorgt voor optimale werking en verhoogt de levensduur van boren en bits. Het wordt gebruikt om optimaal gebruik van boren te garanderen en hun levensduur te verlengen. Het is geschikt voor boor- en beitelsteeluiteinden.

Schroevendraaier bit set, 32 stuks, torx, phillips, pozidriv, hexagonaal, sleufkop, tamper-proof torx, lengte: 25 mm

Boor, voor beton, metselwerk, gewapend beton, 4 mm, SDS-plus, lengte: 160 mm (pak van 10)

This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hardness and enables sufficient performance for all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks. This robust and compact set has a transparent storage box that provides a good overview of the contents as well as secure storage and transport. It has an external hexagonal shaft of 1/4 inch and is designed for universal mounting of screws with screwdrivers and power drills.
Robust Line bit set S extra hard with 8+1 pieces
Bit length 25 mm, ISO 1173 C6.3, with quick-change universal holder

3mm diameter wood twist drill with countersink and a working length of 30mm

Bosch SDS-Quick Multi-purpose Drill Bit

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Package contains one piece.

The steering drill bit drill the pilot hole for positioning the hole saw in the correct position. Use this handlebar head for drilling holes in many different types of materials. It can be used with all power-powered and battery-powered screwdrivers.

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and power drills. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw installation, making it suitable for all tasks. Drive unit ISO 1173 C6.3, 1/4" external hexagon

Boorstift, voor graniet, gehard beton, gneis, gehard verstevigd beton, hamerboor, 16 mm, SDS-plus, lengte: 265 mm

Boorstift, voor spaanplaat, zachthout, spaanplaat, speedboor, 20 mm, zeskant, lengte: 400 mm