Ventilatie - pagina 9

Fresh transition piece, used in connection with the transition from square pipes to round pipes or hoses. Allows to go from ø82/127/162mm to 10x15cm or 15x15 cm together with 500055 or 500057. Can also be clicked together with slatted grid without rear edge.

Brick grid 150x150 mm, black, plastic. Fits modular, masonry and telescopic pipes together with spigot 8/10.

Flap valve in white plastic with square frame and rear edge. Fits in square tube 150x150mm. With 20% forced opening. Can be closed completely with the enclosed lock. The air flow is easily adjusted in four fixed positions with a cord pull.

Cover plate for Klimat K7 195x195 mm (Ø100 to Ø160 mm).

Ventilatorserie met een breed scala aan modellen voor wand-, plafond- of raambevestiging. Bij installatie in een raam wordt een speciale raamkit gebruikt. Een effectieve oplossing voor badkamers, toiletten en andere kleinere ruimtes.

Fan S7 with 9 functions, Ø100 mm, white

Used for mounting in cupboards and interior doors. Ensures the necessary extraction.

Bierglas, 45 cl, wegwerpbord, transparant (pak van 22)

Valve mesh, Type 195.4, 100 mm, stainless

Fan with built-in time control. With ball bearings, which ensures a long service life. 97 m3/h - sound level 25 dB(A) - 5 year warranty.

Cover plate for completion when breaking through a wall. Fits i.a. for wall valve type 69.

Transition piece Ø133/140/152mm. Cut the transition piece to the dimension to be used. With the Duka click system, two transition pieces are clicked together.

Telescopic pipe for wall, with sound insulation. Can be adjusted in length. Valves and grates are mounted on these with a click system. Type 204 can be extended with an extra piece.

Flex hose Ø100x3000 mm, alu.

Duka Fan SmartFan TH, Ø100/125 mm, white

Flex hose with insulation Ø102x4000 mm, white

Ensures tight connection between exhaust pipe and ceiling valve. Prevents condensation damage to the ceiling panel. The Klik system means setting up valves without screws and enables the valve to be removed for cleaning. Fits flap valve type 113.

Jalousie grille with insect net. Mounts directly to wall, plinth or gable.  Fasten with 1 screw in each corner or with sealant.  Can be used for all types of ventilation tasks.  The insect net prevents the entry of insects.  If the grate is used in the flue of a tumble dryer, we recommend removing the insect net so that lint from the tumbler does not clog the grate.  Manufactured in aluminium.

Flat louvre with insect net. Mounts directly to wall, plinth or gable.  Fasten with 1 screw in each corner or with sealant.

Transition piece for wall penetration type 201. With the Duka click system, two transition pieces are clicked together. Thereby, two different channel dimensions are combined in an easy and simple way. Always remember to seal with glue or silicone. Colour: White Manufactured in Polystyrene (HIPS).

Has small ribs under the slanted blinds to keep insects and other small animals out. Suitable for wall penetration type 201.

Louvers for air intake and return. With flange and with fly net. Cast in aluminium.

Louvers for air intake and return. With flange and with fly net. Cast in aluminium.

For installation in Duka's white plastic ventilation pipes in connection with fans mounted in the wall, when you want to avoid drafts when the fan is switched off.

Reduction to white ventilation pipes.