Tilta - pagina 3

This support bracket helps to fully stabilize and secure your camera when mounted on the Gravity G1, G2, or G2X by attaching from the tilt arm of the gimbal to the hot shoe mount of your camera.

This camera cage provides complete protective armor for the Fujifilm X-T3 and X-T4 cameras.

It provides several 1/4”-20 mounting points as well as two cold shoe mounting points.

The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

This kit of the Fujifilm X-T3/X-T4 cage includes: the base Fujifilm X-T3/X-T4 cage, quick release top handle, Arca and Manfrotto quick release baseplates, a clamp to attach an HDMI cable comfortably to the cage (one specifically for the X-T3 and one for the X-T4), and finally the Tiltaing Side Power Handle with Run/Stop Type I (F570 Battery) along with the compatible Fujifilm X series R/S cable.

Compatible with Type II Baseplates and Type I Side Handles.

This bracket attaches to the front of the Tiltaing Full Camera Cage for Sony a7C to provide support for a EF mount lens adapter.

The Quick Release Baseplate for Canon C500 Mk II/C300 Mk III connects to your camera via 1/4″-20 and 3/8″-16 tie down screws and features a non-slip, cushioned shoulder pad designed to be comfortable and secure.

The dual rosettes on each side of the baseplate allows users to quickly mount extension arms for better handheld support while the lens adapter support allows you to attach various lens mount adapters via a 1/4″-20 screw.

Front and back 15mm LWS rod supports allows you to easily mount accessories both in front of and behind the shoulder pad.

The baseplate’s VCT locking extension and locking toggle allows you to choose between mounting the baseplate to either a standard VCT plate or a Tilta standard dovetail plate.

This backing for the MB-T12 matte box allows you to clamp the matte box onto lenses within a given front diameter.

- Retains access to the camera shoe mount, ports, battery, and display
- Multiple 1/4"-20 accessory threads
- 1/4"-20 camera mounting screw
- Removable Manfrotto-style plate fits Manfrotto-compatible baseplates
- 1/4"-20 mounting threads on the bottom for tripod mounting
- One integrated shoe mount
- Integrated single rod port for optional Tilta single-rod mount
- Aluminum and steel construction

- Custom Designed for the Sony ZVE-10 Camera Body
- Mount Accessories via 1/4"-20 Threads and a Cold Shoe Receiver on the Bottom Plate
- Accessible Design Maintains Easy Access to Camera Ports, Function Buttons, and Battery Compartment
- Highly Compatible with Accessories like Sony ECM-W2BT & Wireless Shooting Grip
- Lightweight Design Greatly Improves Functionality while Maintaining a Compact Form Factor

Included:
- T10 Allen key x1
- T6 Allen key x1
- 1/4" Torx screw x1
- M2x6 Torx screws x3
- M2x4 Torx screws x2

1. (1) 19mm dovetail plate
2. (2) Hand grips can be rotated 360 degrees from the Rosettes
3. High density foam handle for better support and stability
4. Quick Release Shoulder Pad (only compatible with the TILTA Alexa Mini baseplate)
5. (2) Side arms
6. Hard Shell Case
7. Great for handheld camerawork with any camera system

TECHNICAL DETAILS
Color: black
Material: aluminum-alloy

Without blocking the camera's hot shoe, the Tilta Full Camera Cage for Canon R5/R6, in black, provides two additional shoe mounts plus mounting threads for several optional Tilta add-ons. Dedicated 1/4"-20 threads allow you to attach side handles, single 15mm rod holders, and an HDMI clamp. There are also small threads on the front for securing a lens adapter support. For adjusting camera settings, the cage features a scroll wheel on top that controls the camera's right-hand scroll wheel .

Included with the cage is a quick release plate that attaches to the bottom. The plate offers multiple 1/4"-20 threads for balancing the cage on gimbals and other supports. The plate also allows quick release attachment to the optional Tilta 15mm LWS baseplate, which will let you expand the cage with rods and other accessories. Alternatively, Arca-Swiss and Manfrotto standard Tilta quick release plates can be purchased separately and attached in place of the included plate for direct compatibility with Arca/Manfrotto tripods and other supports.

The camera mounting platform is silicone padded for safe camera attachment. Also, a slot is provided on top for securing a safety strap, sold separately. The battery slot of the camera and all other ports and controls remain accessible through the all-aluminum cage.

Khronos Mini LED Panel Space Grey

This camera cage provides protective armor for the RED Komodo camera. It provides several 1/4”-20 and 3/8”-16 mounting points for mounting accessories. It also includes two rosettes on each side as well as a cold shoe mount on top. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle, adjustable quick release top handle, and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

This kit of the RED Komodo camera cage will help to fully build out your setup. It includes: the base RED Komodo cage, right side wooden handle, quick release top handle, Arca and Manfrotto quick release baseplates, 15mm LWS baseplate, an Adjustable Cold Shoe Accessory Mounting Bracket, and finally a Dual Canon BP to V Mount Adapter Battery Plate to allow for a longer battery life for your camera.

TILTA Nucleus-M 7-7Pin Motor to Motor Conn. Cable 55cm

- Mount Accessories via Cold Shoe Receiver, NATO Rail, 3/8"-16 and 1/4"-20 Threads with Locating Points
- Custom Designed for the Nikon Z8 Camera Body
- Arca Ready via Compatible Bottom Plate Perfect for DJI Ronin and Compatible Tripods
- Security Threads Provide Multiple Points of Contact for Improved Security
- Cable Clamp Secures Cables in Place with Convenient Thumb Screw Design

For Hydra Alien Mini, compatible with DJI Osmo Pocket 3

This “half” camera cage provides protective armor for the Sony a7S III camera. It provides several 1/4”-20 mounting points as well as one cold shoe mounting point.

The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

A Tiltaing Lightweight Quick Release Top Handle with Arri Locating Pins can be attached to the cage to provide for a comfortable camera operating setup.

1. (1) 15mm dovetail plate
2. (2) Hand grips can be rotated 360 degrees from the Rosettes
3. High density foam handle for better support and stability
4. Quick Release Shoulder Pad (only compatible with the TILTA Alexa Mini baseplate)
5. (2) Side arms
6. Hard Shell Case
7. Great for handheld camerawork with any camera system

TECHNICAL DETAILS

Color: black
Material: aluminum-alloy

This camera cage provides complete protective armor for the Panasonic GH4, GH5, and GH5S cameras. It provides several 1/4”-20 and 3/8”-16 mounting points as well as two cold shoe mounting points. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

This kit of the Panasonic GH Series cage includes: the base Panasonic GH Series cage, quick release top handle, Tilta Hand Strap, Arca and Manfrotto quick release baseplates, a 15mm LWS baseplate for mounting accessories (as well as a single 15mm rod mounting clamp), an HDMI male to HDMI female cable, as well as a clamp to attach the HDMI cable comfortably to the cage and a clamp to attach both the HDMI and Nucleus Nano R/S cable comfortably to the cage.

Materials: Nylon

- Includes a top plate with a shoe mount
- Four rosette mounts
- 1/4"-20 and 3/8"-16 accessory threads
- Multiple 1/4"-20 mounting threads for optimal balancing on gimbals
- Proprietary adapter plate included for attaching to the optional Tilta 15mm LWS Baseplate for RED KOMODO Cage by quick release

The TILTA Seamless Focus Ring is crafted for lenses with a diameter of 72mm to 74mm, allowing smooth and precise focus adjustments for filmmakers. Its seamless construction ensures a secure, slip-free fit, making it an ideal choice for professional camera rigs and high-quality filming setups.

Designed for Tiltaing camera cages, the Left-Side Advanced Focus Handle, allows you to connect to the optional Nucleus Nano motor to control focus via a built-in finger wheel. It also features a record button for triggering record on/off over an optional Tilta R/S cable connection to compatible cameras. Multiple R/S cables are available, depending on your camera.

The handle attaches to the left side of your Tiltaing cage using your choice of an optional dedicated Left Side Handle Adapter—the Type IV, V, or VI version. Each of these attachment adapters use a different mount type, such as rosette or NATA rail.

The handle accepts a Sony F570 battery, sold separately. An included USB cable connects the handle to your Nucleus Nano motor to power it off the F570 battery and to allow finger-wheel focus control.

There are two connections on the handle: an 8V regulated USB Type-C output (where the USB cable plugs in) and 12 VDC output.

Tilta Right Side Wooden Handle 2.0 Handvat

Tilta TA-T01-FCC-G kooi voor camerabescherming 1/4, 3/8" Grijs

Tilta MB-T16-SCF camerafilteraccessoire